Tegera Pro 9102 Synthetic Leather Assembly Gloves

An unlined all-round glove for dry work where grip counts

Tegera Pro 9102 is a synthetic leather glove made in Microthan+ with reinforced seams. An extra layer of diamond-patterned Gripforce, which the sheet identifies as polypropylene, sits on the palm and gives the glove its grip. The back is polypropylene with a decorative yellow section for visibility, and a 360 degree elasticated wrist fastening closes it.

Ejendals recommends it for all-round work in dry environments where excellent grip and durability are crucial. It is classed as all-round work gloves and assembly gloves, medium weight, unlined, chrome free and a Category II glove. The data sheet is clear about the intended use: dry, clean, dirty, slippery and harsh environments.

Key features

• Microthan+ synthetic leather with reinforced seams
• Diamond-patterned Gripforce layer in the palm
• Chrome free, which removes chrome allergy risk
• Reinforced index finger, palm, fingers and thumb
• Pre-curved fingers and a specially designed thumb
• Good fingertip sensitivity and flexibility
• Unlined, 184-225 mm length
• Elasticated 360 degree wrist fastening
• Six sizes 7 to 12

Technical specifications

Sizes and article numbers

When 9102 is the right Pro glove

EN 388 code 3111X gives abrasion 3, cut 1, tear 1 and puncture 1, so this is a grip and abrasion glove and gives no cut or puncture protection worth the name. For cut risk choose a cut-rated glove such as the Tegera 8855. For a lined winter version of the same collection, see the Tegera 9126.

The 184 to 225 mm length leaves the lower wrist free, so the cuff does not catch on tools. Because the glove is unlined it is better suited to warm workshops and vehicles than to cold stores. Sizes 7 to 12 are packed six pairs per bundle with a hangtag hook. The risks Ejendals lists for the glove are chrome allergy, abrasion injuries, blisters, grazes, contact with dirt and chapping, which tells you the job it was designed for: hands that grip tools, panels and fixings for hours in dry, dirty or slippery conditions. Quote the article number with the size, for example 9102-10, and confirm the quantity in bundles.

Handling and cleaning

The Gripforce layer wears with use, so check the palm for polished spots after heavy handling of rough steel. The glove carries a decorative yellow section on the back of the hand for better visibility, which also makes a worn or lost glove easy to spot on a bench or in a vehicle. Wipe off oil and dust with a damp cloth and let the glove air dry; avoid hot washing, which can stiffen synthetic leather.

The elasticated cuff gives a snug fit but is not a sealed cuff. For spraying, grinding and hot work add the appropriate task-specific protection.

Installation, assembly and service work

The sheet lists fine assembly, machine operating, carpentry, installation work, electrical installation, HVAC installation, sheet-metal work, engineering, warehouse work, airport work and service work among the areas, with industries including automotive repair, metal fabrication, electricity and gas supply, building and construction, mining and warehousing. For HVAC and electrical crews, the thin palm keeps feel on small screws and cable terminals.

Selection and care notes

Use the glove for dry work such as handling tools, fixings, panels and general assembly. It is not a chemical glove and not a cut-rated glove, so choose another model where those hazards are present. Check the size with the user, because a good fit improves grip and reduces fatigue, and replace the glove when the palm layer wears out.

Information needed for a quotation

Send the full glove code, the size range, the quantity in pairs, the delivery location in Oman or the GCC and the hazards the glove must cover, so that the complete supply can be quoted together.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification and the site risk assessment before a purchase is confirmed. Standards, performance levels and sizes are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and construction projects.

Related items and documents

Tegera 8821 provides a knitted nitrile-dot alternative with light contact-heat protection, and Tegera 9180A adds vibration damping for power tools. Browse more in Safety & PPE. The sheet is attached as a PDF. Send the article number with size to Seven Star LLC, an independent supplier in Muscat, and confirm quantities in full bundles.

Related Tegera products: Tegera 8821 High-Visibility Nitrile Dot Assembly Gloves, Tegera Pro 9180A Anti-Vibration Gloves EN ISO 10819, Tegera Pro 9126 Waterproof Winter Work Gloves with Sympatex, Tegera Chemforce 7350 Winter-Lined Nitrile Chemical Gloves, Tegera Chemforce 8160 Heat-Resistant Latex Chemical Gloves and Tegera Oil Grip 8855 Cut Level C Nitrile Foam Gloves.