- Automation & ControlView all 2,467 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Siemens
Siemens 6EP1332-1LB00 SITOP PSU100L 24V/2.5A Power Supply
Description
6EP1332-1LB00: SITOP PSU100L 24 V / 2.5 A stabilized power supply, explained
The Siemens 6EP1332-1LB00 is a basic-duty single-phase 24 V supply from the SITOP lite line, slim and focused on the essential functions. It is the 24 V DC, 2.5 A version in the catalog. This 2.5 A unit is the narrowest of the three PSU100L models at 32.5 mm. The SITOP lite line trades advanced diagnostics for simplicity and size, so there is no signalling contact; the green lamp is the only status output.
The article number is simply the catalog identifier for this rating of the SITOP PSU100L group; it does not describe the build in a way that can be decoded digit by digit without the manufacturer’s tables, so always quote the full number 6EP1332-1LB00 when ordering. Seven Star LLC supplies the 6EP1332-1LB00 in Oman and the GCC as an independent supplier in Muscat.
Technical specifications of the 6EP1332-1LB00
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Siemens / 6EP1332-1LB00 |
| Product line | SITOP PSU100L (SITOP lite line) |
| Rated output | 24 V DC, 2.5 A |
| Input | 120 V or 230 V AC, selected with a switch on the unit: 93 – 132 V / 187 – 264 V |
| Input current | 1.1 A at 120 V; 0.65 A at 230 V |
| Switch-on current limit (+25 °C) | max. 27 A |
| Mains buffering at rated load | min. 20 ms; at Vin = 93/187 V |
| Output voltage adjustment | 22.8 – 26.4 V via potentiometer |
| Output tolerance (static) | ±3 % |
| Residual ripple (peak-peak, max.) | 150 mV |
| Efficiency at rated load, approx. | 85 % |
| Power loss at rated load, approx. | 9 W |
| Start-up delay, max. | 1.5 s |
| Short-circuit / overload response | Constant-current characteristic (current limit about 2.6 A) |
| Parallel operation for more power | Yes |
| Protection class | Class I |
| Approvals listed | cULus listed (UL 508, CSA C22.2 No. 107.1); CB |
| Hazardous-area listings | No hazardous-area approval is listed for this series in the catalog |
| Ambient temperature (operation) | 0 – 60 °C, natural convection |
| Derating note (catalog) | +45 – +60 °C: Derating 2%/K |
| Humidity class | Climate class 3K3, no condensation |
| EMC | Emissions EN 55022 Class A; noise immunity EN 61000-6-2 |
| Degree of protection | IP20 |
| Dimensions (W × H × D) | 32.5 × 125 × 120 mm |
| Mounting | Snap-on to DIN rail EN 60715 35 × 7.5/15; side-by-side mounting permitted |
| MTBF at 40 °C | 3 153 082 h (catalog value) |
Values are taken from the manufacturer’s SITOP catalog (KT 10.1, 2016) and apply at rated input voltage and +25 °C unless stated otherwise; check the current data sheet of the exact unit before design freeze.
How the 6EP1332-1LB00 regulates and protects its 24 V output
The 6EP1332-1LB00 is a basic-duty switch-mode supply that is set to the local mains with a selector switch (120 V or 230 V) instead of automatic ranging. The regulated 24 V output is isolated, adjustable between 22.8 – 26.4 V, and protected by a constant-current characteristic; the green LED confirms that 24 V is present.
This design keeps the unit slim and inexpensive: no lateral clearance is needed, efficiency is 85 %, and the product is built for the 0 – 60 °C range with derating above +45 °C. Emissions are rated to EN 55022 Class A, which is acceptable for industrial cabinets.
Where the 6EP1332-1LB00 fits in the control system
In a typical cabinet the 6EP1332-1LB00 sits right behind the incoming breaker and feeds a 24 V distribution rail. Other members of the SITOP PSU100L group in the catalog are 6EP1333-1LB00, 6EP1334-1LB00; they share the same operating concept but differ in rated current, width and weight, so they are not interchangeable in a fixed layout without checking space and breaker coordination.
For this series the catalog lists the SITOP PSE202U redundancy modules (6EP1962-2BA00, 6EP1964-2BA00) and the SITOP PSE200U four-channel selectivity modules in 3 A (6EP1961-2BA11, 6EP1961-2BA31) and 10 A (6EP1961-2BA21, 6EP1961-2BA41) versions.
As an independent supplier, Seven Star LLC can help you match the supply to the rest of the bill of materials, for example by checking that the redundancy or buffer module suits the output current, but the final electrical design remains with your engineering team.
Selection and ordering checklist for the 6EP1332-1LB00
- Load current: add the continuous demand of all 24 V consumers and compare it with the 2.5 A rating of the 6EP1332-1LB00, leaving margin for inrush and future additions.
- Mains: confirm that the site supply matches the input data (120 V or 230 V AC, selected with a switch on the unit: 93 – 132 V / 187 – 264 V) and check the input current figures given in the specification table.
- Cabinet temperature: the operating range is 0 – 60 °C and derating applies at the upper end; compare it with the worst-case temperature inside the enclosure.
- Space: allow 32.5 mm width on the rail plus 125 mm of height and 120 mm of depth; vertical clearance for convection is required.
- Protection: the unit contains a non-accessible built-in input fuse (T 2 A/250 V (not accessible)), so the upstream breaker must be coordinated with the inrush current.
- Add-ons: decide early whether a redundancy, buffer or selectivity module is needed; the catalog lists compatible modules for the series.
- Select it for non-critical 24 V loads up to 2.5 A, where emissions to Class A and a 0 – 60 °C range are acceptable for the cabinet.
Installation, commissioning and maintenance
Install the 6EP1332-1LB00 on a 35 mm DIN rail with the usual vertical clearance. Before energising, set the 120/230 V selector to match the mains; an incorrect setting is the most common error on this series.
Wire L, N and PE with the screw terminals, switch on and verify the green OK lamp and the 24 V output. Because the emissions are rated to Class A, check your EMC requirements if the cabinet is in a residential or light-commercial area.
Set the input selector switch to match the mains (120 V or 230 V) before energising; a mismatch is the most common commissioning error on this series.
- Inspect terminals for tightness and discolouration at each shutdown.
- Clean dust from the vents with dry compressed air; do not block the convection path.
- Compare the output voltage with the value recorded at commissioning.
- Keep one spare of the same article number for critical cabinets, since lead times for individual SITOP models can vary.
Typical applications in Oman and the GCC
In Oman and the GCC, the 6EP1332-1LB00 fits air-conditioned electrical rooms, packaged-machine cabinets and utility panels where cost matters and temperatures stay below 60 °C. For unconditioned outdoor enclosures, consider a wider-range SITOP smart or modular supply instead, since this series is specified only up to 60 °C.
Typical uses are packaging-line control boxes, small pump panels and machine-builder cabinets in air-conditioned rooms.
SITOP PSU100L group at a glance
The table lists the SITOP PSU100L versions found in the catalog so you can compare ratings and size before selecting the 6EP1332-1LB00.
| Article number | Output | Width | Weight | Efficiency |
|---|---|---|---|---|
| 6EP1332-1LB00 | 24 V / 2.5 A | 32.5 mm | – | 85 % |
| 6EP1333-1LB00 | 24 V / 5 A | 50 mm | 0.5 kg | 86 % |
| 6EP1334-1LB00 | 24 V / 10 A | 70 mm | 0.75 kg | 89 % |
Information to send with an RFQ for the 6EP1332-1LB00
- Exact article number (6EP1332-1LB00) and quantity, including whether you need identical replacement or an equivalent.
- Supply system at site: voltage, frequency and number of phases, plus whether a DC feed is possible.
- Output requirement: voltage, continuous current, peak or inrush loads and the number of parallel units if redundancy is planned.
- Ambient conditions inside the cabinet: maximum temperature, dust, humidity and any hazardous-area classification.
- Required accessories, for example redundancy, buffer or selectivity modules, terminals or labeling plates.
- Delivery location (Muscat or elsewhere in Oman or the GCC) and required delivery time.
- Any document requirement such as a datasheet or manual in English.
Documents and quotation
Send us the part number 6EP1332-1LB00 and we will confirm which manufacturer documents are available for it. The figures on this page come from the manufacturer’s SITOP catalog and should be checked against the data sheet of the exact unit before design freeze.
Seven Star LLC is an independent supplier based in Muscat and is not affiliated with the manufacturer. To request a quotation for the 6EP1332-1LB00, send the information listed above through the request-for-quotation form or by email; we will reply with availability and lead time.
Other Models in the Siemens Sitop Psu100l Range
Seven Star LLC supplies models from the Siemens Sitop Psu100l range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Siemens 6EP1332-1LB00 SITOP PSU100L 24V/2.5A Power Supply | Power Modules | You are viewing this model |
| Siemens 6EP1333-1LB00 SITOP PSU100L 24V/5A Power Supply | Power Modules | View details |
| Siemens 6EP1334-1LB00 SITOP PSU100L 24V/10A Power Supply | Power Modules | View details |
Datasheets & Documents
- Datasheet Siemens 6EP1332-1LB00 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Siemens is the German technology group whose industrial products include SIMATIC controllers and HMIs, SINAMICS drives, SIRIUS and SENTRON switching and protection devices, SIPROTEC protection relays, SITRANS process instruments, SCALANCE networks and process analysers. It was founded in Berlin on 12 October 1847 by Werner von Siemens and the precision mechanic Johann Georg Halske as Telegraphen-Bauanstalt von Siemens & Halske, to build Siemens's newly designed pointer telegraph. Siemens AG is headquartered in Munich and listed on the Frankfurt Stock Exchange; its energy business was spun off as Siemens Energy in 2020.
Siemens company profile
| Founded | 12 October 1847, Berlin, Germany, as Telegraphen-Bauanstalt von Siemens & Halske, with 10 employees |
|---|---|
| Founders | Werner von Siemens (1816–1892) and Johann Georg Halske (1814–1890) |
| First product | The pointer telegraph designed by Werner von Siemens |
| Headquarters | Munich, Germany (Siemens AG) |
| Ownership | Public company listed in Frankfurt; Siemens Energy (2020) and Siemens Healthineers are separately listed companies |
| Businesses acquired that appear in our range | Moore Products (bought in 2000; APACS and QUADLOG control systems), Applied Automation (Maxum process gas chromatographs); small industrial gas turbines such as the SGT-300 came with Alstom's industrial turbine business in 2003 |
| Product families | SIMATIC S7 PLCs, ET 200 distributed I/O and HMI panels, TIA Portal software, SINAMICS drives, SIMOTICS motors, SIRIUS and SENTRON low voltage devices, SIVACON switchboards, SIPROTEC relays, SITRANS instruments, SCALANCE network components, building technology valves and sensors |
Milestones
- 1847: Siemens & Halske starts work in Berlin with 10 employees.
- 1848: The company wins the contract for Europe's first long-distance telegraph line, Berlin to Frankfurt am Main.
- 1856: 330 employees, two-thirds of them working on telegraph networks in Russia.
- 1866: Werner von Siemens describes the dynamo-electric principle, the basis of the electric generator.
- 1958 onwards: The SIMATIC name is used for Siemens industrial automation; S7 PLCs follow in the 1990s and S7-1500 in 2012.
- 2020: Siemens Energy is spun off and listed separately.
Choosing Siemens automation products
A Siemens order number (MLFB) identifies the exact product: 6ES7 is SIMATIC automation, 6AV is HMI, 6GK is industrial communication, 6SL is SINAMICS drives, 3R is SIRIUS control and 5SY is SENTRON miniature circuit breakers. For PLCs, S7-1200 is the compact controller for small machines, S7-1500 is the current mid-to-high range controller, and S7-300 and S7-400 are older platforms still running in many plants; S7-300 is being phased out, so spares and migration to S7-1500 are common requests. When replacing a CPU or module, the full order number including the version digits matters, because firmware and hardware versions affect compatibility with the existing project.
Where Siemens products are used
In Oman and the GCC, Siemens automation runs in oil and gas, power and desalination plants, water networks, cement and process industries. Maxum gas chromatographs analyse gas composition in gas plants and refineries, SIPROTEC relays protect substations, SGT-300 turbines drive generators and compressors, and Siemens building valves are used in HVAC systems.
Siemens products we list
| Family | Examples |
|---|---|
| SIMATIC controllers and I/O | S7-1500, CPU 1515-2 PN, S7-1200, CPU 1214C, S7-300, S7-400H CPU 412-5H, ET 200SP, IM 153-2 |
| HMI and networking | KTP700 Basic, TP700 Comfort, TP1200 Comfort, SCALANCE XC208, SCALANCE WAM766, PROFIBUS OLM |
| Drives, motors and power distribution | SINAMICS G120C, SINAMICS G120X, 1LA7 motor, SIVACON S8, SIPROTEC 7SJ85, 5SY4510-7 MCB |
| Process instruments | SITRANS P320, MAG 5100W, SITRANS TH320, SITRANS TS500, SITRANS TR200 |
| Maxum II analyser spares | FID 302A detector, FPD II assembly, filament detector, Model 50 valve, SYSCON kit, air bath heater |
| APACS and QUADLOG spares | QLCCM24AAN, QLSAMBAN, QLSDM024DCCBN, 39SAMCAN, 16137-151 M-BUS cable |
| Building technology | VPI46 PICV, VPF44, QFM1660 sensor |
Ordering Siemens products: what we need
Send the full order number from the label (for example 6ES7214-1AG40-0XB0) and, for PLC and HMI parts, the hardware and firmware version (FS and V numbers). For Maxum II and APACS spares, send the Siemens part number such as 2021651-002. For drives, add the motor power and supply voltage.
Frequently requested Siemens models: Siemens IM 155-6 PN ST ET 200SP Interface Module 6ES7155-6AU02-0BN0, Siemens SGT-300 Industrial Gas Turbine.
Facts checked against Siemens's published history timeline, October 2026.
FAQ
Questions about the Siemens 6EP1332-1LB00 SITOP PSU100L 24V/2.5A Power
Answers from our engineering team on installation, compatibility and integration.
01How is the 6EP1332-1LB00 set to 120 V or 230 V mains?
The input range is chosen with a selector switch on the unit (93 – 132 V or 187 – 264 V). Set it before energising; the series does not switch automatically.
02How does the 6EP1332-1LB00 behave on a short circuit or overload?
The response is: constant-current characteristic (current limit about 2.6 A). Make sure downstream protective devices can operate with this current, and confirm that the load list does not exceed the 2.5 A rating for long periods.
03Can the 6EP1332-1LB00 be connected in parallel?
Yes. The catalog allows parallel connection to increase power with up to 2 units. For redundancy rather than more power, the SITOP PSE202U redundancy modules decouple the supplies; match the module rating to the output current before ordering.
04What ambient temperature range does the 6EP1332-1LB00 support?
The catalog gives an operating range of 0 – 60 °C with natural convection. Derating applies at the upper end, so verify the cabinet temperature under full load rather than the room temperature.
05What are the dimensions and weight of the 6EP1332-1LB00?
The enclosure measures 32.5 mm wide, 125 mm high and 120 mm deep and weighs about the weight given on the data sheet. It snaps onto a 35 mm DIN rail and can be mounted side by side, but vertical clearance for convection must be kept.


















Reviews
There are no reviews yet.