Brand:

Siemens 6EP1334-1LB00 SITOP PSU100L 24V/10A Power Supply

Description

6EP1334-1LB00: SITOP PSU100L 24 V / 10 A stabilized power supply, explained

The Siemens 6EP1334-1LB00 is a basic-duty single-phase 24 V supply from the SITOP lite line, slim and focused on the essential functions. It is the 24 V DC, 10 A version in the catalog. The 10 A unit is 70 mm wide, weighs 0.75 kg and delivers 240 W at 89 % efficiency, with an inrush limit of 65 A. It is the largest PSU100L model and the one most often picked for machine builders with a mixed load of valves and I/O.

The article number is simply the catalog identifier for this rating of the SITOP PSU100L group; it does not describe the build in a way that can be decoded digit by digit without the manufacturer’s tables, so always quote the full number 6EP1334-1LB00 when ordering. Seven Star LLC supplies the 6EP1334-1LB00 in Oman and the GCC as an independent supplier in Muscat.

Technical specifications of the 6EP1334-1LB00

Parameter Specification
Manufacturer / part number Siemens / 6EP1334-1LB00
Product line SITOP PSU100L (SITOP lite line)
Rated output 24 V DC, 10 A
Input 120 V or 230 V AC, selected with a switch on the unit: 93 – 132 V / 187 – 264 V
Input current 4.1 A at 120 V; 2 A at 230 V
Switch-on current limit (+25 °C) max. 65 A
Mains buffering at rated load min. 20 ms; at Vin = 93/187 V
Output voltage adjustment 22.8 – 26.4 V via potentiometer
Output tolerance (static) ±3 %
Residual ripple (peak-peak, max.) 150 mV
Efficiency at rated load, approx. 89 %
Power loss at rated load, approx. 34 W
Start-up delay, max. 1.5 s
Short-circuit / overload response Constant-current characteristic (current limit about 10.5 A)
Parallel operation for more power Yes
Protection class Class I
Approvals listed cULus listed (UL 508, CSA C22.2 No. 107.1); CB
Hazardous-area listings No hazardous-area approval is listed for this series in the catalog
Ambient temperature (operation) 0 – 60 °C, natural convection
Derating note (catalog) +45 – +60 °C: Derating 2%/K
Humidity class Climate class 3K3, no condensation
EMC Emissions EN 55022 Class A; noise immunity EN 61000-6-2
Degree of protection IP20
Dimensions (W × H × D) 70 × 125 × 120 mm
Weight, approx. 0.75 kg
Mounting Snap-on to DIN rail EN 60715 35 × 7.5/15; side-by-side mounting permitted
MTBF at 40 °C 2 333 396 h (catalog value)

Values are taken from the manufacturer’s SITOP catalog (KT 10.1, 2016) and apply at rated input voltage and +25 °C unless stated otherwise; check the current data sheet of the exact unit before design freeze.

How the 6EP1334-1LB00 regulates and protects its 24 V output

The 6EP1334-1LB00 is a basic-duty switch-mode supply that is set to the local mains with a selector switch (120 V or 230 V) instead of automatic ranging. The regulated 24 V output is isolated, adjustable between 22.8 – 26.4 V, and protected by a constant-current characteristic; the green LED confirms that 24 V is present.

This design keeps the unit slim and inexpensive: no lateral clearance is needed, efficiency is 89 %, and the product is built for the 0 – 60 °C range with derating above +45 °C. Emissions are rated to EN 55022 Class A, which is acceptable for industrial cabinets.

Where the 6EP1334-1LB00 fits in the control system

In a typical cabinet the 6EP1334-1LB00 sits right behind the incoming breaker and feeds a 24 V distribution rail. Other members of the SITOP PSU100L group in the catalog are 6EP1332-1LB00, 6EP1333-1LB00; they share the same operating concept but differ in rated current, width and weight, so they are not interchangeable in a fixed layout without checking space and breaker coordination.

For this series the catalog lists the SITOP PSE202U redundancy modules (6EP1962-2BA00, 6EP1964-2BA00) and the SITOP PSE200U four-channel selectivity modules in 3 A (6EP1961-2BA11, 6EP1961-2BA31) and 10 A (6EP1961-2BA21, 6EP1961-2BA41) versions.

As an independent supplier, Seven Star LLC can help you match the supply to the rest of the bill of materials, for example by checking that the redundancy or buffer module suits the output current, but the final electrical design remains with your engineering team.

Selection and ordering checklist for the 6EP1334-1LB00

  • Load current: add the continuous demand of all 24 V consumers and compare it with the 10 A rating of the 6EP1334-1LB00, leaving margin for inrush and future additions.
  • Mains: confirm that the site supply matches the input data (120 V or 230 V AC, selected with a switch on the unit: 93 – 132 V / 187 – 264 V) and check the input current figures given in the specification table.
  • Cabinet temperature: the operating range is 0 – 60 °C and derating applies at the upper end; compare it with the worst-case temperature inside the enclosure.
  • Space: allow 70 mm width on the rail plus 125 mm of height and 120 mm of depth; vertical clearance for convection is required.
  • Protection: the unit contains a non-accessible built-in input fuse (T 6.3 A/250 V (not accessible)), so the upstream breaker must be coordinated with the inrush current.
  • Add-ons: decide early whether a redundancy, buffer or selectivity module is needed; the catalog lists compatible modules for the series.
  • Choose it for loads up to 10 A in a cabinet that stays between 0 and 60 °C; the inrush of up to 65 A should be considered when coordinating the upstream breaker.

Installation, commissioning and maintenance

Install the 6EP1334-1LB00 on a 35 mm DIN rail with the usual vertical clearance. Before energising, set the 120/230 V selector to match the mains; an incorrect setting is the most common error on this series.

Wire L, N and PE with the screw terminals, switch on and verify the green OK lamp and the 24 V output. Because the emissions are rated to Class A, check your EMC requirements if the cabinet is in a residential or light-commercial area.

Leave 50 mm clear above and below and keep the unit away from hot devices; at 240 W the heat loss is about 34 W.

  • Inspect terminals for tightness and discolouration at each shutdown.
  • Clean dust from the vents with dry compressed air; do not block the convection path.
  • Compare the output voltage with the value recorded at commissioning.
  • Keep one spare of the same article number for critical cabinets, since lead times for individual SITOP models can vary.

Typical applications in Oman and the GCC

In Oman and the GCC, the 6EP1334-1LB00 fits air-conditioned electrical rooms, packaged-machine cabinets and utility panels where cost matters and temperatures stay below 60 °C. For unconditioned outdoor enclosures, consider a wider-range SITOP smart or modular supply instead, since this series is specified only up to 60 °C.

It fits larger machine cabinets, packaged utility systems and general-purpose automation panels.

SITOP PSU100L group at a glance

The table lists the SITOP PSU100L versions found in the catalog so you can compare ratings and size before selecting the 6EP1334-1LB00.

Article number Output Width Weight Efficiency
6EP1332-1LB00 24 V / 2.5 A 32.5 mm – 85 %
6EP1333-1LB00 24 V / 5 A 50 mm 0.5 kg 86 %
6EP1334-1LB00 24 V / 10 A 70 mm 0.75 kg 89 %

Information to send with an RFQ for the 6EP1334-1LB00

  • Exact article number (6EP1334-1LB00) and quantity, including whether you need identical replacement or an equivalent.
  • Supply system at site: voltage, frequency and number of phases, plus whether a DC feed is possible.
  • Output requirement: voltage, continuous current, peak or inrush loads and the number of parallel units if redundancy is planned.
  • Ambient conditions inside the cabinet: maximum temperature, dust, humidity and any hazardous-area classification.
  • Required accessories, for example redundancy, buffer or selectivity modules, terminals or labeling plates.
  • Delivery location (Muscat or elsewhere in Oman or the GCC) and required delivery time.
  • Any document requirement such as a datasheet or manual in English.

Documents and quotation

Send us the part number 6EP1334-1LB00 and we will confirm which manufacturer documents are available for it. The figures on this page come from the manufacturer’s SITOP catalog and should be checked against the data sheet of the exact unit before design freeze.

Seven Star LLC is an independent supplier based in Muscat and is not affiliated with the manufacturer. To request a quotation for the 6EP1334-1LB00, send the information listed above through the request-for-quotation form or by email; we will reply with availability and lead time.

Other Models in the Siemens Sitop Psu100l Range

Seven Star LLC supplies models from the Siemens Sitop Psu100l range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Siemens 6EP1332-1LB00 SITOP PSU100L 24V/2.5A Power SupplyPower ModulesView details
Siemens 6EP1333-1LB00 SITOP PSU100L 24V/5A Power SupplyPower ModulesView details
Siemens 6EP1334-1LB00 SITOP PSU100L 24V/10A Power SupplyPower ModulesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Siemens 6EP1334-1LB00 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Siemens is the German technology group whose industrial products include SIMATIC controllers and HMIs, SINAMICS drives, SIRIUS and SENTRON switching and protection devices, SIPROTEC protection relays, SITRANS process instruments, SCALANCE networks and process analysers. It was founded in Berlin on 12 October 1847 by Werner von Siemens and the precision mechanic Johann Georg Halske as Telegraphen-Bauanstalt von Siemens & Halske, to build Siemens's newly designed pointer telegraph. Siemens AG is headquartered in Munich and listed on the Frankfurt Stock Exchange; its energy business was spun off as Siemens Energy in 2020.

Siemens company profile

Founded 12 October 1847, Berlin, Germany, as Telegraphen-Bauanstalt von Siemens & Halske, with 10 employees
Founders Werner von Siemens (1816–1892) and Johann Georg Halske (1814–1890)
First product The pointer telegraph designed by Werner von Siemens
Headquarters Munich, Germany (Siemens AG)
Ownership Public company listed in Frankfurt; Siemens Energy (2020) and Siemens Healthineers are separately listed companies
Businesses acquired that appear in our range Moore Products (bought in 2000; APACS and QUADLOG control systems), Applied Automation (Maxum process gas chromatographs); small industrial gas turbines such as the SGT-300 came with Alstom's industrial turbine business in 2003
Product families SIMATIC S7 PLCs, ET 200 distributed I/O and HMI panels, TIA Portal software, SINAMICS drives, SIMOTICS motors, SIRIUS and SENTRON low voltage devices, SIVACON switchboards, SIPROTEC relays, SITRANS instruments, SCALANCE network components, building technology valves and sensors

Milestones

  • 1847: Siemens & Halske starts work in Berlin with 10 employees.
  • 1848: The company wins the contract for Europe's first long-distance telegraph line, Berlin to Frankfurt am Main.
  • 1856: 330 employees, two-thirds of them working on telegraph networks in Russia.
  • 1866: Werner von Siemens describes the dynamo-electric principle, the basis of the electric generator.
  • 1958 onwards: The SIMATIC name is used for Siemens industrial automation; S7 PLCs follow in the 1990s and S7-1500 in 2012.
  • 2020: Siemens Energy is spun off and listed separately.

Choosing Siemens automation products

A Siemens order number (MLFB) identifies the exact product: 6ES7 is SIMATIC automation, 6AV is HMI, 6GK is industrial communication, 6SL is SINAMICS drives, 3R is SIRIUS control and 5SY is SENTRON miniature circuit breakers. For PLCs, S7-1200 is the compact controller for small machines, S7-1500 is the current mid-to-high range controller, and S7-300 and S7-400 are older platforms still running in many plants; S7-300 is being phased out, so spares and migration to S7-1500 are common requests. When replacing a CPU or module, the full order number including the version digits matters, because firmware and hardware versions affect compatibility with the existing project.

Where Siemens products are used

In Oman and the GCC, Siemens automation runs in oil and gas, power and desalination plants, water networks, cement and process industries. Maxum gas chromatographs analyse gas composition in gas plants and refineries, SIPROTEC relays protect substations, SGT-300 turbines drive generators and compressors, and Siemens building valves are used in HVAC systems.

Siemens products we list

Family Examples
SIMATIC controllers and I/O S7-1500, CPU 1515-2 PN, S7-1200, CPU 1214C, S7-300, S7-400H CPU 412-5H, ET 200SP, IM 153-2
HMI and networking KTP700 Basic, TP700 Comfort, TP1200 Comfort, SCALANCE XC208, SCALANCE WAM766, PROFIBUS OLM
Drives, motors and power distribution SINAMICS G120C, SINAMICS G120X, 1LA7 motor, SIVACON S8, SIPROTEC 7SJ85, 5SY4510-7 MCB
Process instruments SITRANS P320, MAG 5100W, SITRANS TH320, SITRANS TS500, SITRANS TR200
Maxum II analyser spares FID 302A detector, FPD II assembly, filament detector, Model 50 valve, SYSCON kit, air bath heater
APACS and QUADLOG spares QLCCM24AAN, QLSAMBAN, QLSDM024DCCBN, 39SAMCAN, 16137-151 M-BUS cable
Building technology VPI46 PICV, VPF44, QFM1660 sensor

Ordering Siemens products: what we need

Send the full order number from the label (for example 6ES7214-1AG40-0XB0) and, for PLC and HMI parts, the hardware and firmware version (FS and V numbers). For Maxum II and APACS spares, send the Siemens part number such as 2021651-002. For drives, add the motor power and supply voltage.

Frequently requested Siemens models: Siemens IM 155-6 PN ST ET 200SP Interface Module 6ES7155-6AU02-0BN0, Siemens SGT-300 Industrial Gas Turbine.

Facts checked against Siemens's published history timeline, October 2026.

FAQ

Questions about the Siemens 6EP1334-1LB00 SITOP PSU100L 24V/10A Power

Answers from our engineering team on installation, compatibility and integration.

01How is the 6EP1334-1LB00 set to 120 V or 230 V mains?
The input range is chosen with a selector switch on the unit (93 – 132 V or 187 – 264 V). Set it before energising; the series does not switch automatically.
02What ambient temperature range does the 6EP1334-1LB00 support?
The catalog gives an operating range of 0 – 60 °C with natural convection. Derating applies at the upper end, so verify the cabinet temperature under full load rather than the room temperature.
03What are the dimensions and weight of the 6EP1334-1LB00?
The enclosure measures 70 mm wide, 125 mm high and 120 mm deep and weighs about 0.75 kg. It snaps onto a 35 mm DIN rail and can be mounted side by side, but vertical clearance for convection must be kept.
04How efficient is the 6EP1334-1LB00 and how much heat does it release?
The catalog lists an efficiency of about 89 % at rated load, which corresponds to a power loss of 34 W. Include this loss in the cabinet heat balance, especially in hot desert climates.
05What input voltage does the 6EP1334-1LB00 accept?
According to the catalog it accepts 120 V or 230 V AC, selected with a switch on the unit: 93 – 132 V / 187 – 264 V. Check this against the site supply and the selector or jumper setting where the series has one, since a mismatch is the most common cause of a dead unit at commissioning.