Brand:

Siemens 6EP1332-1SH43 LOGO!Power 24V/2.5A Power Supply

Description

6EP1332-1SH43: LOGO!Power 24 V / 2.5 A stabilized power supply, explained

The Siemens 6EP1332-1SH43 is a flat, stepped-profile miniature power supply in the same housing style as LOGO! logic modules. It is the 24 V DC, 2.5 A version in the catalog. Rated 2.5 A at 24 V (about 60 W), this unit widens to 72 mm and weighs roughly 0.25 kg. It is the mid-point of the 24 V LOGO!Power line and has an inrush limit of 46 A, noticeably higher than the 1.3 A unit.

The article number is simply the catalog identifier for this rating of the LOGO!Power group; it does not describe the build in a way that can be decoded digit by digit without the manufacturer’s tables, so always quote the full number 6EP1332-1SH43 when ordering. Seven Star LLC supplies the 6EP1332-1SH43 in Oman and the GCC as an independent supplier in Muscat.

Technical specifications of the 6EP1332-1SH43

Parameter Specification
Manufacturer / part number Siemens / 6EP1332-1SH43
Product line LOGO!Power
Rated output 24 V DC, 2.5 A
Input Wide range: 85 – 264 V AC or 110 – 300 V DC (rated 100 – 240 V)
Input current 1.22 A at 120 V; 0.66 A at 230 V
Switch-on current limit (+25 °C) max. 46 A
Mains buffering at rated load min. 40 ms; at Vin = 187 V
Output voltage adjustment 22.2 – 26.4 V via potentiometer
Output tolerance (static) ±3 %
Residual ripple (peak-peak, max.) 200 mV
Efficiency at rated load, approx. 88 %
Start-up delay, max. 0.5 s
Short-circuit / overload response Constant-current characteristic (current limit about 3.3 A)
Parallel operation for more power Yes
Protection class Class II (without protective conductor)
Approvals listed cULus listed (UL 508, CSA C22.2 No. 107.1); NEC Class 2 (UL 1310); CB; marine approvals listed: GL, ABS, BV, DNV, LRS
Hazardous-area listings ATEX category 3G (Ex nA IIC) and cCSAus Class I Div. 2 listings appear in the catalog for this series, with FM Class I Div. 2 also listed
Ambient temperature (operation) −20 – +70 °C, natural convection
Derating note (catalog) +55 – +70 °C: Derating 2%/K
Humidity class Climate class 3K3, no condensation
EMC Emissions EN 55022 Class B; noise immunity EN 61000-6-2
Degree of protection IP20
Dimensions (W × H × D) 72 × 90 × 52.6 mm
Weight, approx. 0.25 kg
Mounting Snap-on to DIN rail EN 60715 35 × 7.5/15; side-by-side mounting permitted
MTBF at 40 °C 3 723 563 h (catalog value)

Values are taken from the manufacturer’s SITOP catalog (KT 10.1, 2016) and apply at rated input voltage and +25 °C unless stated otherwise; check the current data sheet of the exact unit before design freeze.

How the 6EP1332-1SH43 regulates and protects its 24 V output

The 6EP1332-1SH43 regulates its 24 V output with a switch-mode converter behind a wide-range input (85 – 264 V AC or 110 – 300 V DC). The output is isolated and short-circuit proof; on overload it follows a constant-current characteristic rather than switching off, so a load that briefly draws too much will recover on its own once the demand falls.

The catalog highlights a power reserve of 1.5 times the rated current when starting capacitive loads, which helps with inrush from the input capacitors of electronics. Efficiency stays high across the load range, and the catalog limits the no-load loss to 1.8 W at most.

Where the 6EP1332-1SH43 fits in the control system

In a typical cabinet the 6EP1332-1SH43 sits right behind the incoming breaker and feeds a 24 V distribution rail. Its LOGO!-style flat housing, only 52.6 mm deep, lets it share a rail with LOGO! logic modules and small relays under the same cover. Other members of the LOGO!Power group in the catalog are 6EP1311-1SH03, 6EP1311-1SH13, 6EP1321-1SH03, 6EP1322-1SH03, 6EP1351-1SH03, 6EP1352-1SH03; they share the same operating concept but differ in rated current, width and weight, so they are not interchangeable in a fixed layout without checking space and breaker coordination.

For this series the catalog lists the SITOP PSE202U redundancy modules (6EP1962-2BA00 for NEC Class 2 output power, 6EP1964-2BA00 for up to 10 A) and the SITOP PSE200U 3 A four-channel selectivity module (6EP1961-2BA11 with common alarm, 6EP1961-2BA31 with single-channel signalling).

As an independent supplier, Seven Star LLC can help you match the supply to the rest of the bill of materials, for example by checking that the redundancy or buffer module suits the output current, but the final electrical design remains with your engineering team.

Selection and ordering checklist for the 6EP1332-1SH43

  • Load current: add the continuous demand of all 24 V consumers and compare it with the 2.5 A rating of the 6EP1332-1SH43, leaving margin for inrush and future additions.
  • Mains: confirm that the site supply matches the input data (Wide range: 85 – 264 V AC or 110 – 300 V DC (rated 100 – 240 V)) and check the input current figures given in the specification table.
  • Cabinet temperature: the operating range is -20 – +70 °C and derating applies at the upper end; compare it with the worst-case temperature inside the enclosure.
  • Space: allow 72 mm width on the rail plus 90 mm of height and 52.6 mm of depth; vertical clearance for convection is required.
  • Protection: the catalog recommends a miniature circuit breaker of 16 A characteristic B or 10 A characteristic C on the input; the built-in fuse is internal.
  • Add-ons: decide early whether a redundancy, buffer or selectivity module is needed; the catalog lists compatible modules for the series.
  • Take the 46 A inrush into account when choosing the upstream breaker: the catalog still recommends a B16 or C10 miniature circuit breaker for the series, but several units on one breaker should be checked.

Installation, commissioning and maintenance

Snap the 6EP1332-1SH43 onto a 35 mm DIN rail inside a closed distribution board. The housing is only 52.6 mm deep and permits side-by-side mounting; keep vertical space free so that convection can carry the heat away.

Wire L and N on the input and the output terminals to the load, using the screw terminals (0.5 – 2.5 mm²). Check the green OK lamp and the voltage at the load; if you trim the output, do so with the load connected.

Allow 72 mm of rail width and keep the supply away from heat sources; the unit is rated up to +70 °C with derating of 2 % per kelvin above +55 °C.

  • Inspect terminals for tightness and discolouration at each shutdown.
  • Clean dust from the vents with dry compressed air; do not block the convection path.
  • Compare the output voltage with the value recorded at commissioning.
  • Keep one spare of the same article number for critical cabinets, since lead times for individual SITOP models can vary.

Typical applications in Oman and the GCC

In Oman and the GCC, the 6EP1332-1SH43 is typically found in small distribution boards, building-services cabinets and light industrial panels where LOGO!-style logic controllers already exist. Heat is the main concern: the housing is rated to +70 °C with derating, but cabinets in direct sun should be checked against the curve. Humidity and fine dust call for a closed, filtered enclosure.

It suits small PLC cabinets with a handful of I/O cards, door and gate controls, and building-services panels.

LOGO!Power group at a glance

The table lists the LOGO!Power versions found in the catalog so you can compare ratings and size before selecting the 6EP1332-1SH43.

Article number Output Width Weight Efficiency
6EP1311-1SH03 5 V / 3 A 54 mm 0.17 kg 77 %
6EP1311-1SH13 5 V / 6.3 A 72 mm 0.25 kg 83 %
6EP1321-1SH03 12 V / 1.9 A 54 mm 0.17 kg 80 %
6EP1322-1SH03 12 V / 4.5 A 72 mm 0.25 kg 85 %
6EP1351-1SH03 15 V / 1.9 A 54 mm 0.17 kg 81 %
6EP1352-1SH03 15 V / 4 A 72 mm 0.25 kg 85 %
6EP1331-1SH03 24 V / 1.3 A 54 mm 0.17 kg 85 %
6EP1332-1SH43 24 V / 2.5 A 72 mm 0.25 kg 88 %
6EP1332-1SH52 24 V / 4 A 90 mm 0.34 kg 89 %

Information to send with an RFQ for the 6EP1332-1SH43

  • Exact article number (6EP1332-1SH43) and quantity, including whether you need identical replacement or an equivalent.
  • Supply system at site: voltage, frequency and number of phases, plus whether a DC feed is possible.
  • Output requirement: voltage, continuous current, peak or inrush loads and the number of parallel units if redundancy is planned.
  • Ambient conditions inside the cabinet: maximum temperature, dust, humidity and any hazardous-area classification.
  • Required accessories, for example redundancy, buffer or selectivity modules, terminals or labeling plates.
  • Delivery location (Muscat or elsewhere in Oman or the GCC) and required delivery time.
  • Any document requirement such as a datasheet or manual in English.

Documents and quotation

Send us the part number 6EP1332-1SH43 and we will confirm which manufacturer documents are available for it. The figures on this page come from the manufacturer’s SITOP catalog and should be checked against the data sheet of the exact unit before design freeze.

Seven Star LLC is an independent supplier based in Muscat and is not affiliated with the manufacturer. To request a quotation for the 6EP1332-1SH43, send the information listed above through the request-for-quotation form or by email; we will reply with availability and lead time.

Other Models in the Siemens Logopower Range

Seven Star LLC supplies models from the Siemens Logopower range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Siemens 6EP1311-1SH03 LOGO!Power 5V/3A Power SupplyPower ModulesView details
Siemens 6EP1321-1SH03 LOGO!Power 12V/1.9A Power SupplyPower ModulesView details
Siemens 6EP1331-1SH03 LOGO!Power 24V/1.3A Power SupplyPower ModulesView details
Siemens 6EP1332-1SH43 LOGO!Power 24V/2.5A Power SupplyPower ModulesYou are viewing this model
Siemens 6EP1332-1SH52 LOGO!Power 24V/4A Power SupplyPower ModulesView details
Datasheets & Documents
  • PDF Datasheet Siemens 6EP1332-1SH43 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Siemens is the German technology group whose industrial products include SIMATIC controllers and HMIs, SINAMICS drives, SIRIUS and SENTRON switching and protection devices, SIPROTEC protection relays, SITRANS process instruments, SCALANCE networks and process analysers. It was founded in Berlin on 12 October 1847 by Werner von Siemens and the precision mechanic Johann Georg Halske as Telegraphen-Bauanstalt von Siemens & Halske, to build Siemens's newly designed pointer telegraph. Siemens AG is headquartered in Munich and listed on the Frankfurt Stock Exchange; its energy business was spun off as Siemens Energy in 2020.

Siemens company profile

Founded 12 October 1847, Berlin, Germany, as Telegraphen-Bauanstalt von Siemens & Halske, with 10 employees
Founders Werner von Siemens (1816–1892) and Johann Georg Halske (1814–1890)
First product The pointer telegraph designed by Werner von Siemens
Headquarters Munich, Germany (Siemens AG)
Ownership Public company listed in Frankfurt; Siemens Energy (2020) and Siemens Healthineers are separately listed companies
Businesses acquired that appear in our range Moore Products (bought in 2000; APACS and QUADLOG control systems), Applied Automation (Maxum process gas chromatographs); small industrial gas turbines such as the SGT-300 came with Alstom's industrial turbine business in 2003
Product families SIMATIC S7 PLCs, ET 200 distributed I/O and HMI panels, TIA Portal software, SINAMICS drives, SIMOTICS motors, SIRIUS and SENTRON low voltage devices, SIVACON switchboards, SIPROTEC relays, SITRANS instruments, SCALANCE network components, building technology valves and sensors

Milestones

  • 1847: Siemens & Halske starts work in Berlin with 10 employees.
  • 1848: The company wins the contract for Europe's first long-distance telegraph line, Berlin to Frankfurt am Main.
  • 1856: 330 employees, two-thirds of them working on telegraph networks in Russia.
  • 1866: Werner von Siemens describes the dynamo-electric principle, the basis of the electric generator.
  • 1958 onwards: The SIMATIC name is used for Siemens industrial automation; S7 PLCs follow in the 1990s and S7-1500 in 2012.
  • 2020: Siemens Energy is spun off and listed separately.

Choosing Siemens automation products

A Siemens order number (MLFB) identifies the exact product: 6ES7 is SIMATIC automation, 6AV is HMI, 6GK is industrial communication, 6SL is SINAMICS drives, 3R is SIRIUS control and 5SY is SENTRON miniature circuit breakers. For PLCs, S7-1200 is the compact controller for small machines, S7-1500 is the current mid-to-high range controller, and S7-300 and S7-400 are older platforms still running in many plants; S7-300 is being phased out, so spares and migration to S7-1500 are common requests. When replacing a CPU or module, the full order number including the version digits matters, because firmware and hardware versions affect compatibility with the existing project.

Where Siemens products are used

In Oman and the GCC, Siemens automation runs in oil and gas, power and desalination plants, water networks, cement and process industries. Maxum gas chromatographs analyse gas composition in gas plants and refineries, SIPROTEC relays protect substations, SGT-300 turbines drive generators and compressors, and Siemens building valves are used in HVAC systems.

Siemens products we list

Family Examples
SIMATIC controllers and I/O S7-1500, CPU 1515-2 PN, S7-1200, CPU 1214C, S7-300, S7-400H CPU 412-5H, ET 200SP, IM 153-2
HMI and networking KTP700 Basic, TP700 Comfort, TP1200 Comfort, SCALANCE XC208, SCALANCE WAM766, PROFIBUS OLM
Drives, motors and power distribution SINAMICS G120C, SINAMICS G120X, 1LA7 motor, SIVACON S8, SIPROTEC 7SJ85, 5SY4510-7 MCB
Process instruments SITRANS P320, MAG 5100W, SITRANS TH320, SITRANS TS500, SITRANS TR200
Maxum II analyser spares FID 302A detector, FPD II assembly, filament detector, Model 50 valve, SYSCON kit, air bath heater
APACS and QUADLOG spares QLCCM24AAN, QLSAMBAN, QLSDM024DCCBN, 39SAMCAN, 16137-151 M-BUS cable
Building technology VPI46 PICV, VPF44, QFM1660 sensor

Ordering Siemens products: what we need

Send the full order number from the label (for example 6ES7214-1AG40-0XB0) and, for PLC and HMI parts, the hardware and firmware version (FS and V numbers). For Maxum II and APACS spares, send the Siemens part number such as 2021651-002. For drives, add the motor power and supply voltage.

Frequently requested Siemens models: Siemens IM 155-6 PN ST ET 200SP Interface Module 6ES7155-6AU02-0BN0, Siemens SGT-300 Industrial Gas Turbine.

Facts checked against Siemens's published history timeline, October 2026.

FAQ

Questions about the Siemens 6EP1332-1SH43 LOGO!Power 24V/2.5A Power

Answers from our engineering team on installation, compatibility and integration.

01Does the 6EP1332-1SH43 need a protective-earth connection?
No. The catalog lists protection class II without a protective conductor, so only L and N are connected on the input. The unit is a flat DIN-rail device and can sit next to LOGO! logic modules.
02What input voltage does the 6EP1332-1SH43 accept?
According to the catalog it accepts Wide range: 85 – 264 V AC or 110 – 300 V DC (rated 100 – 240 V). Check this against the site supply and the selector or jumper setting where the series has one, since a mismatch is the most common cause of a dead unit at commissioning.
03How much input current does the 6EP1332-1SH43 draw?
The catalog gives 1.22 A at the lower rated voltage and 0.66 A at the higher one, with a switch-on current limit of up to 46 A. Coordinate the upstream breaker with these values, especially when several units start together.
04How does the 6EP1332-1SH43 behave on a short circuit or overload?
The response is: constant-current characteristic (current limit about 3.3 A). Make sure downstream protective devices can operate with this current, and confirm that the load list does not exceed the 2.5 A rating for long periods.
05Can the 6EP1332-1SH43 be connected in parallel?
Yes. The catalog allows parallel connection to increase power with up to 2 units. For redundancy rather than more power, the SITOP PSE202U redundancy modules decouple the supplies; match the module rating to the output current before ordering.