Schneider ZB5AVBG3 Green LED Light Block, 24-120 V AC/DC

Description

ZB5AVBG3: green light block with body and fixing collar, protected LED, 24-120 V AC/DC

The ZB5AVBG3 is a Schneider Electric Harmony XB5 light block with body and fixing collar, listed in the datasheet as a complete body and light block assembly. It clips behind a 22 mm pilot light or illuminated head and carries the supply terminals. Seven Star LLC supplies the ZB5AVBG3 in Oman and the GCC as an independent supplier based in Muscat, usually to panel builders and maintenance stores.

The datasheet title reads “green light block with body/fixing collar integral LED 24–120V”. The green wide-range version of the protected LED block. The datasheet lists the light source as protected LED and the colour as green.

Honest status note: the datasheet, issued 8 Nov 2026, records this reference as discontinued on 31 Jan 2023, with end of service on 13 Jan 2023, so availability is subject to remaining stock.

LED and supply behaviour of ZB5AVBG3

The datasheet lists the light source as Protected LED with an integral LED and a green light colour. Service life is 100000 h at rated voltage and 25 °C, signalling is steady, and the block carries surge withstand of 1 kV, fast-transient resistance of 2 kV, 10 V/m electromagnetic-field resistance and Class B emission as listed.

Net weight is 0.022 kg, depth 32 mm. The LED is integral, so a failed block is replaced as a whole.

Mounting and wiring of ZB5AVBG3

The block mounts from the front, clipping behind the head, and connects by screw clamp terminals: up to two conductors of 1.5 mm² with cable ends, or single conductors from 0.22 mm² without ends. The datasheet gives a tightening torque of 0.8 to 1.2 N.m and lists screw heads compatible with Philips and pozidriv No 1 drivers and flat 4 mm and 5.5 mm blades. The terminals are marked X1 and X2.

The datasheet specifies the panel hole as 22.5 mm recommended, with a finished-hole tolerance written as 22.3 mm plus 0.4 mm. For connection by screw clamp terminals or plug-in connectors it asks for a fixing centre of at least 40 × 30 mm, for Faston connectors 45 × 32 mm and for printed-circuit-board connection 30 × 30 mm. The cut-out data applies to the head that sits in front of this block.

Installation and maintenance notes

Clip the block behind the head, tighten the terminals to the specified torque and energise at the rated supply, then check that the lens glows evenly. Keep spares matched by voltage: the supply on the ZB5AVBG3 label must agree with the circuit it is installed in. Re-check terminal tightness after the first thermal cycles on hot panels.

Light blocks compared with ZB5AVBG3

Light blocks differ by supply voltage, light source and colour. These references are from the same lane.

Part number Light source Colour Supply
ZB5AV3 Incandescent Bulb 110–120 V AC at 50/60 Hz
ZB5AVB1 Universal LED White 24 V AC/DC at 50/60 Hz
ZB5AVBG1 Universal LED White 24–120 V AC/DC at 50/60 Hz
ZB5AVBG3 Protected LED Green 24–120 V AC/DC at 50/60 Hz
ZB5AVBG4 Protected LED Red 24–120 V AC/DC at 50/60 Hz
ZB5AVBG5 Protected LED Orange 24–120 V AC/DC at 50/60 Hz
ZB5AVM1 Universal LED White 230–240 V AC at 50/60 Hz

Technical specifications of the ZB5AVBG3

Parameter Specification
Manufacturer / part number Schneider Electric / ZB5AVBG3
Range Harmony XB5
Product type Complete body/light block assembly
Device short name ZB5
Fixing collar material Plastic
Light source Protected LED
Bulb base Integral LED
Light source colour Green
Rated supply voltage [Us] 24–120 V AC/DC at 50/60 Hz
Supply voltage limits 19.2–132 V DC; 21.6–132 V AC
Signalling type Steady
Service life 100000 h at rated voltage and 25 °C
Connections Screw clamp terminals, ≤ 2 × 1.5 mm² with cable end; Screw clamp terminals, ≥ 1 × 0.22 mm² without cable end conforming to IEC; 60947-1
Terminal marking (ISO) (X1-X2)PL
Tightening torque 0.8–1.2 N.m
Rated insulation voltage [Ui] 600 V (pollution degree 3)
Rated impulse withstand [Uimp] 6 kV
Surge withstand 1 kV
Electromagnetic emission Class B
Overall dimensions (W, H, D) 30 mm × 42 mm × 32 mm
Net weight 0.022 kg
Device presentation Basic sub-assemblies
Vibration resistance 5 gn, 2–500 Hz
Shock resistance 30 gn for 18 ms; 50 gn for 11 ms (half sine)
Storage temperature -40–70 °C
Operating temperature -40–70 °C
Product certifications BV, GL, UL listed, DNV, LROS (Lloyd’s Register), CSA

Selection checklist and RFQ information for ZB5AVBG3

Send the points below so that the part number can be confirmed against the datasheet and checked for availability in one reply.

  • Part number ZB5AVBG3 and the required quantity.
  • Control supply voltage and whether it is AC or DC.
  • The head and lens colour it will sit behind.
  • Colour of the LED if the block is coloured.
  • Panel clearance behind the head, against the block depth.
  • Delivery location in Oman or the GCC and the lead time you need.

Supply and typical duty of ZB5AVBG3

Typical duty is run or healthy indication on a lamp head. The datasheet notes this reference is discontinued, with all coloured LED blocks replaced by a single universal LED block.

The rated supply is 24–120 V AC/DC at 50/60 Hz. Always check that the control circuit voltage and type (AC or DC) falls inside the datasheet limits before ordering.

Typical uses in Oman and the GCC

Light blocks sit behind pilot lights and illuminated heads on motor control centres, pump stations, switchgear doors and machine panels across oil and gas, petrochemical, power and desalination sites. The this unit fits panels where the supply, heat and dust conditions suit the datasheet limits.

Documents and quotation

The Schneider Electric datasheet for the ZB5AVBG3 is attached on this page for your technical file. It holds the data summarised above together with panel cut-out and dimension drawings. The copy was issued on 8 Nov 2026 and records the part as discontinued on 31 Jan 2023, so confirm current availability before ordering.

To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.

Other Models in the Se Zb5 Block Range

Seven Star LLC supplies models from the Se Zb5 Block range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Schneider ZB5AV3 Light Block with BA9s Bulb, 110-120 V ACAutomation AccessoriesView details
Schneider Electric ZB5AVB1 White LED Light Block, 24 V AC/DCAutomation AccessoriesView details
Schneider ZB5AVBG1 White LED Light Block, 24-120 V AC/DCAutomation AccessoriesView details
Schneider ZB5AVBG3 Green LED Light Block, 24-120 V AC/DCAutomation AccessoriesYou are viewing this model
Schneider Electric ZB5AVBG4 Red LED Light Block, 24-120 V AC/DCAutomation AccessoriesView details
Schneider ZB5AVBG5 Orange LED Light Block, 24-120 V AC/DCAutomation AccessoriesView details
Schneider Electric ZB5AVM1 White LED Light Block, 230-240 V ACAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Schneider Electric ZB5AVBG3 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider ZB5AVBG3 Green LED Light Block, 24-120 V

Answers from our engineering team on installation, compatibility and integration.

01What supply does the ZB5AVBG3 need?
The datasheet lists a rated supply of 24–120 V AC/DC at 50/60 Hz. Supply limits are 19.2–132 V DC and 21.6–132 V AC.
02Is the ZB5AVBG3 an LED or a bulb block?
It is an LED block, listed as Protected LED with an integral LED.
03How is the ZB5AVBG3 connected?
By screw clamp terminals marked X1 and X2, tightened to 0.8 to 1.2 N.m.
04What temperature range does the ZB5AVBG3 list?
Operating and storage -40 to 70 °C. See the datasheet linked on this page for the full figures.
05Does Seven Star LLC supply the ZB5AVBG3 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.