Schneider Electric ZB4BVB3 XB4 BA9s Light Block 250 V

Description

ZB4BVB3: BA9s light block with fixing collar, up to 250 V

The ZB4BVB3 is a Schneider Electric Harmony XB4 complete body and light block assembly for a BA9s bulb, supplied directly at up to 250 V without a transformer. Seven Star LLC supplies the ZB4BVB3 in Oman and the GCC as an independent supplier based in Muscat, usually to maintenance stores that keep bulb-type indicators running on existing panels.

The datasheet lists the light source as bulb not included, the base as BA 9s, and the light block supply as direct with a power limit of under 2.4 W. The this unit therefore needs a separate bulb of the right voltage and base, chosen by the buyer for the circuit it will serve. The ordering code is not explained in the datasheet, so no reading is offered beyond the catalogue title.

Installation and maintenance of the ZB4BVB3

Fit the head through the panel hole, add the this unit behind it, and tighten the screws at the datasheet torque of 0.8 to 1.2 N.m. The datasheet lists the screw heads as compatible with a Philips No 1 or a pozidriv No 1 driver and, on LED blocks, a 4 mm or 5.5 mm flat blade. Use cable ends for two conductors of up to 1.5 mm².

After wiring, energise the circuit and check that the lamp lights at the right moment in the sequence and goes fully dark when de-energised. Test the bulb before the panel door is closed. Keep a spare this unit in stock for critical panels.

Information to send with an RFQ for the ZB4BVB3

  • Part number ZB4BVB3 and quantity.
  • Control supply voltage and type (AC, DC).
  • The head that will sit in front, with its part number.
  • Colour and legend required.
  • Delivery location and schedule.

Direct supply and bulb choice for the ZB4BVB3

The datasheet states a rated supply voltage of up to 250 V, with the light block supplied directly and a power limit of under 2.4 W. The bulb is not included, so the voltage across the lamp depends entirely on the bulb that the buyer chooses. This is a flexible but demanding design: the same body serves several control voltages, and the person fitting the bulb has to match the bulb rating to the supply.

The datasheet lists a BA 9s base and a steady signalling type, with a rated insulation voltage of 600 V at pollution degree 3. Do not exceed the 2.4 W limit with a high-power bulb, because heat inside the block shortens bulb life and can stress the surrounding plastic.

Typical uses of the ZB4BVB3 in Oman and the GCC

Light blocks of this kind sit behind pilot light heads and illuminated push-button heads on motor control centres, pump and fan starters, desalination skids, switchgear doors and packaged skids in oil and gas, petrochemical, power and water facilities. The this unit is the part that makes the head light up, so it is often the first spare to be consumed in service. In the Gulf, heat and humidity inside sun-loaded enclosures are the main stresses on any lamp, which is why maintenance teams keep spare blocks near critical panels.

As a separate item, it also lets a plant change a lamp colour or type without replacing the front head.

Selection checklist for the ZB4BVB3

  • Reference this unit and quantity, one block per lamp position.
  • Supply: 24 V AC/DC at 50/60 Hz, and whether it is AC, DC or both.
  • Bulb type, voltage and power, kept below the datasheet limit.
  • Head type that will sit in front, which must be compatible with this block type.
  • Panel thickness and space behind the panel for a body 47 mm high and 37 mm deep.
  • Approvals needed, compared against the datasheet list.

Fitting and replacing the bulb in the ZB4BVB3

Because the this unit ships without a bulb, ordering is a two-step job: the block and the bulb. Choose a bulb with a BA9s base, an operating voltage that matches the circuit and a power rating below the limit. Keep a few spare bulbs of the same type with the spare block, because bulbs fail long before the block does and a missing bulb is a common reason for an indicator that appears dead.

When replacing a bulb, isolate the circuit first and allow the bulb to cool. The block sits behind the panel head, so access is from inside the enclosure.

Light blocks in the same lane compared with the ZB4BVB3

Ten light blocks in this group share the 30 × 47 mm body and the zamak collar. They split into three families: bulb blocks, fixed-voltage LED blocks and wide-range or mains LED blocks.

Reference Light source Rated supply
ZB4BV5 Incandescent 400 V AC at 50/60 Hz
ZB4BV6 Bulb not included ≤ 250 V
ZB4BVB1 Universal LED, white 24 V AC/DC at 50/60 Hz
ZB4BVB3 Protected LED, green 24 V AC/DC at 50/60 Hz
ZB4BVB4 Protected LED, red 24 V AC/DC at 50/60 Hz
ZB4BVB5 Protected LED, orange 24 V AC/DC at 50/60 Hz
ZB4BVBG1 Universal LED, white 24–120 V AC/DC at 50/60 Hz
ZB4BVBG4 Protected LED, red 24–120 V AC/DC at 50/60 Hz
ZB4BVBG5 Protected LED, orange 24–120 V AC/DC at 50/60 Hz
ZB4BVM1 Universal LED, white 230–240 V AC at 50/60 Hz

Select by supply voltage first, then by LED colour or bulb requirement.

Technical specifications of the ZB4BVB3

Parameter Specification
Manufacturer / part number Schneider Electric / ZB4BVB3
Range Harmony XB4
Product type Complete body/light block assembly
Fixing collar material Zamak
Light source Protected LED
Bulb base Integral LED
LED colour Green
Rated supply voltage [Us] 24 V AC/DC at 50/60 Hz
Supply voltage limits 19.2–30 V DC; 21.6–26.4 V AC
Current consumption 18 mA
Signalling type Steady
Service life 100000 h at rated voltage and 25 °C
Terminals Screw clamp; ≤ 2 × 1.5 mm² with cable end (also ≥ 1 × 0.22 mm² without cable end)
Terminal marking (ISO) (X1-X2)PL
Tightening torque 0.8–1.2 N.m conforming to EN 60947-1
Rated insulation voltage [Ui] 600 V (pollution degree 3) conforming to EN 60947-1
Rated impulse withstand [Uimp] 6 kV
Overall size (W × H × D) 30 × 47 × 37 mm
Net weight 0.054 kg
Operating temperature -40–70 °C
Certifications DNV, CSA, BV, GL, UL listed, LROS (Lloyds register of shipping)
Standards EN/IEC 60947-1, CSA C22.2 No 14, EN/IEC 60947-5-1, EN/IEC 60947-5-5, UL 508, EN/IEC 60947-5-4, JIS C8201-5-1, JIS C8201-1
Warranty 18 months

Documents and quotation

The Schneider Electric datasheet for the ZB4BVB3 is attached on this page for your technical file. It carries the dimensions, electrical and environmental data summarised above, and is the document to compare with your project requirement before you order.

To request a quotation, send the part number ZB4BVB3, the quantity and your delivery location. Seven Star LLC is an independent supplier in Muscat and does not act for the manufacturer, so please check that the datasheet data suits your application before ordering.

Other Models in the Se Xb4 Light Block Range

Seven Star LLC supplies models from the Se Xb4 Light Block range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Schneider Electric ZB4BV5 XB4 BA9s Light Block 400 V ACAutomation AccessoriesView details
Schneider Electric ZB4BV6 XB4 BA9s Light Block 250 VAutomation AccessoriesView details
Schneider Electric ZB4BVB1 XB4 White LED Light Block 24 VAutomation AccessoriesView details
Schneider Electric ZB4BVB3 XB4 BA9s Light Block 250 VAutomation AccessoriesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Schneider Electric ZB4BVB3 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric ZB4BVB3 XB4 BA9s Light Block 250

Answers from our engineering team on installation, compatibility and integration.

01Is a bulb included with the ZB4BVB3?
No. The datasheet lists the light source as bulb not included, with a BA 9s base.
02What supply does the ZB4BVB3 accept?
A rated supply of up to 250 V, connected directly, with a power limit of under 2.4 W.
03Does the ZB4BVB3 include a transformer?
No. The datasheet lists the supply as direct, with no transformer.
04Does the ZB4BVB3 include a fixing collar?
Yes. It is described as a complete body and light block assembly with a zamak collar.
05Does Seven Star LLC supply the ZB4BVB3 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we reply with availability.