Schneider Electric ZB4BV5 XB4 BA9s Light Block 400 V AC

Description

ZB4BV5: BA9s incandescent light block with transformer, 400 V

The ZB4BV5 is a Schneider Electric Harmony XB4 complete body and light block assembly for a BA9s incandescent bulb, with an integral transformer that steps a 400 V AC supply down to 6 V. Seven Star LLC supplies the ZB4BV5 in Oman and the GCC as an independent supplier based in Muscat, usually as a like-for-like spare for older metal-style panels.

The this unit is unusual in the range because the datasheet lists the light block supply as via an integral transformer of 1.2 VA at 6 V, with a rated supply of 400 V AC at 50/60 Hz. That means the bulb itself runs at 6 V, not at line voltage. The datasheet lists the light source as incandescent with a BA 9s base. The ordering code is not decoded in the datasheet, so no further reading is offered.

Selection checklist for the ZB4BV5

  • Reference this unit and quantity, one block per lamp position.
  • Supply: 400 V AC at 50/60 Hz, and whether it is AC, DC or both.
  • Bulb type, voltage and power, kept below the datasheet limit.
  • Head type that will sit in front, which must be compatible with this block type.
  • Panel thickness and space behind the panel for a body 47 mm high and 60 mm deep.
  • Approvals needed, compared against the datasheet list.

Typical uses of the ZB4BV5 in Oman and the GCC

Light blocks of this kind sit behind pilot light heads and illuminated push-button heads on motor control centres, pump and fan starters, desalination skids, switchgear doors and packaged skids in oil and gas, petrochemical, power and water facilities. The this unit is the part that makes the head light up, so it is often the first spare to be consumed in service. In the Gulf, heat and humidity inside sun-loaded enclosures are the main stresses on any lamp, which is why maintenance teams keep spare blocks near critical panels.

As a separate item, it also lets a plant change a lamp colour or type without replacing the front head.

Light blocks in the same lane compared with the ZB4BV5

Ten light blocks in this group share the 30 × 47 mm body and the zamak collar. They split into three families: bulb blocks, fixed-voltage LED blocks and wide-range or mains LED blocks.

Reference Light source Rated supply
ZB4BV5 Incandescent 400 V AC at 50/60 Hz
ZB4BV6 Bulb not included ≤ 250 V
ZB4BVB1 Universal LED, white 24 V AC/DC at 50/60 Hz
ZB4BVB3 Protected LED, green 24 V AC/DC at 50/60 Hz
ZB4BVB4 Protected LED, red 24 V AC/DC at 50/60 Hz
ZB4BVB5 Protected LED, orange 24 V AC/DC at 50/60 Hz
ZB4BVBG1 Universal LED, white 24–120 V AC/DC at 50/60 Hz
ZB4BVBG4 Protected LED, red 24–120 V AC/DC at 50/60 Hz
ZB4BVBG5 Protected LED, orange 24–120 V AC/DC at 50/60 Hz
ZB4BVM1 Universal LED, white 230–240 V AC at 50/60 Hz

Select by supply voltage first, then by LED colour or bulb requirement.

Installation and maintenance of the ZB4BV5

Fit the head through the panel hole, add the this unit behind it, and tighten the screws at the datasheet torque of 0.8 to 1.2 N.m. The datasheet lists the screw heads as compatible with a Philips No 1 or a pozidriv No 1 driver and, on LED blocks, a 4 mm or 5.5 mm flat blade. Use cable ends for two conductors of up to 1.5 mm².

After wiring, energise the circuit and check that the lamp lights at the right moment in the sequence and goes fully dark when de-energised. Test the bulb before the panel door is closed. Keep a spare this unit in stock for critical panels.

Transformer supply and bulb of the ZB4BV5

The integral transformer is rated 1.2 VA with a 6 V secondary, and the rated supply is 400 V AC at 50/60 Hz. This design lets an incandescent indicator be connected straight across a three-phase line-to-line supply without a separate control transformer, which was a common arrangement on older motor starters. The datasheet lists the source as incandescent with a BA 9s base and a steady signalling type.

A transformer-fed bulb block has to be treated as live at line voltage on its input side. The datasheet gives an insulation voltage of 600 V at pollution degree 3 and an impulse withstand of 6 kV, and the degree of protection is listed as IP20, so the this unit belongs inside an enclosure, behind the head, and not in an exposed position.

Technical specifications of the ZB4BV5

Parameter Specification
Manufacturer / part number Schneider Electric / ZB4BV5
Range Harmony XB4
Product type Complete body/light block assembly
Fixing collar material Zamak
Light source Incandescent
Bulb base BA 9s
Light block supply Via integral transformer 1.2 VA 6 V
Rated supply voltage [Us] 400 V AC at 50/60 Hz
Signalling type Steady
Terminals Screw clamp; ≤ 2 × 1.5 mm² with cable end
Terminal marking (ISO) (X1-X2)PL
Tightening torque 0.8–1.2 N.m
Rated insulation voltage [Ui] 600 V (pollution degree 3)
Rated impulse withstand [Uimp] 6 kV
Overall size (W × H × D) 30 × 47 × 60 mm
Net weight 0.131 kg
Degree of protection IP20
Operating temperature -40–55 °C
Certifications DNV, UL listed, LROS (Lloyds register of shipping), BV, CSA
Standards IEC 60947-1, IEC 60947-5-5, IEC 60947-5-1, CSA C22.2 No 14, JIS C8201-5-1, IEC 60947-5-4, UL 508, JIS C8201-1
Warranty 18 months

Bulb handling and replacement on the ZB4BV5

Incandescent bulbs have a limited life and need replacement from time to time, which is the reason this block type exists alongside LED blocks. Choose a bulb with a BA9s base and the 6 V rating that the transformer outputs. The datasheet’s light source field says incandescent, and the BA 9s base is listed, but it does not name an exact bulb part number, so confirm the bulb type with the old lamp or the panel drawing before ordering.

Where a plant is moving to LED indicators, the this unit can still serve as a spare for existing panels until the conversion is complete. Switching one lamp to LED while keeping the transformer block would need a design check, because an LED lamp does not draw the same load as an incandescent bulb.

Information to send with an RFQ for the ZB4BV5

  • Part number ZB4BV5 and quantity.
  • Control supply voltage and type (AC, DC).
  • The head that will sit in front, with its part number.
  • Colour and legend required.
  • Delivery location and schedule.

Documents and quotation

The Schneider Electric datasheet for the ZB4BV5 is attached on this page for your technical file. It carries the dimensions, electrical and environmental data summarised above, and is the document to compare with your project requirement before you order.

To request a quotation, send the part number ZB4BV5, the quantity and your delivery location. Seven Star LLC is an independent supplier in Muscat and does not act for the manufacturer, so please check that the datasheet data suits your application before ordering.

Datasheets & Documents
  • PDF Datasheet Schneider Electric ZB4BV5 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric ZB4BV5 XB4 BA9s Light Block 400

Answers from our engineering team on installation, compatibility and integration.

01What supply does the ZB4BV5 use?
The rated supply is 400 V AC at 50/60 Hz, fed through an integral transformer of 1.2 VA with a 6 V output.
02What bulb does the ZB4BV5 take?
The datasheet lists an incandescent source with a BA 9s base. It does not give an exact bulb part number.
03What protection rating does the ZB4BV5 have?
IP20 is listed, so the block is meant to sit behind the panel inside an enclosure.
04Does the ZB4BV5 include a fixing collar?
Yes. It is described as a complete body and light block assembly with a zamak collar.
05Does Seven Star LLC supply the ZB4BV5 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we reply with availability.