- Automation & ControlView all 2,467 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric XB5AS8442 Turn-Release E-Stop 1 NC
Description
XB5AS8442: red Ø40 mushroom emergency stop, turn to release, 1 NC
The XB5AS8442 is a Schneider Electric Harmony XB5 emergency switching-off push-button with a red Ø40 mushroom head for a 22.5 mm panel hole. The head latches mechanically when pressed and is reset by turn to release; the contact set is one normally closed (NC) contact. Seven Star LLC supplies the XB5AS8442 in Oman and the GCC as an independent supplier based in Muscat, typically to panel builders and maintenance teams that need a latching stop button on a control station, pump panel or machine pendant.
The datasheet describes the product in words, so our reading of the code is an interpretation and not a manufacturer table: XB5AS is the red mushroom emergency-stop family, and the last digits distinguish the reset method and contacts. Compare it with the other five references in the table below, XB5AS542N, XB5AS8442, XB5AS8444, XB5AS9442, XB5AS9445 and XB5AT842.
Sealing, temperature and approvals of the XB5AS8442
The datasheet lists IP66, IP67, IP69, IP69K protection with IK03 impact resistance, UL type 4X/13 enclosure type. Operation is rated from -40 to 70 °C and storage from -40 to 70 °C. Certifications listed for this reference: CSA, Lloyd’s Register (LROS), BV, UL listed, DNV.
This unit fits a 22.5 mm round hole in the panel. The body is 82 mm deep behind the panel, which is the shallow version of the group. The mushroom head is 40 mm wide, and the datasheet gives 43 mm for the height of the unit. The datasheet drawing gives a clamping thickness of 1 to 6 mm. The body measures 40 mm wide, 43 mm high and 82 mm deep behind the panel face. Terminals are screw clamps for up to two 1.5 mm² conductors with cable ends, or at least 0.22 mm² without ends, and the recommended tightening torque is 0.8 to 1.2 N.m.
XB5AS8442 among the red mushroom emergency-stop references
The six references separate on reset method (turn, key or push-pull), contact set and range. XB5AS542N belongs to the older XB5N/XB7N range with IP65 and a CE mark only, while the other five are the main XB5 range with IP66 and wider approvals. Siblings of this unit: XB5AS542N, XB5AS8444, XB5AS9442, XB5AS9445, XB5AT842.
| Reference | Key attributes |
|---|---|
| XB5AS542N | turn to release, 1 NC, 22.5 mm hole, 78.5 mm deep |
| XB5AS8442 | turn to release, 1 NC, 22.5 mm hole, 82 mm deep |
| XB5AS8444 | turn to release, 2 NC, 22 mm hole, 82 mm deep |
| XB5AS9442 | key release, 1 NC, 22 mm hole, 100 mm deep |
| XB5AS9445 | key release, 1 NC + 1 NO, 22 mm hole, 100 mm deep |
| XB5AT842 | push-pull, 1 NC, 22 mm hole, 82 mm deep |
How the XB5AS8442 latches and resets
Pressing the head drives it down and latches it. To restore normal operation the operator rotates the head, which releases the latch and lets it spring back. That makes this unit the plain, tool-free reset.
With one NC contact the stop circuit is closed in normal operation and opens when the head is pressed, so a cut wire or a lost terminal also stops the machine. The datasheet lists positive opening to IEC 60947-5-1 appendix K, so the contacts are forced apart by the actuator, even if they have welded.
Contact ratings and switching data of the XB5AS8442
This unit carries one normally closed (NC) contact, terminals marked (11-12)NC under ISO numbering. Contacts are slow-break and the datasheet lists the usual 10 A thermal rating.
The datasheet lists a conventional thermal current of 10 A, a rated insulation voltage of 600 V at pollution degree 3 and an impulse withstand of 6 kV, with short-circuit protection by a 10 A gG cartridge fuse. Operational currents are given by utilisation category:
- 3 A at 240 V, AC-15, A600
- 6 A at 120 V, AC-15, A600
- 0.1 A at 600 V, DC-13, Q600
- 0.27 A at 250 V, DC-13, Q600
- 0.55 A at 125 V, DC-13, Q600
The silver alloy (Ag/Ni) contacts have a rated electrical life of 1 million cycles at 2 A, 230 V, AC-15, and the mechanical life stated for the actuator is 300000 cycles. Reliability at low signal levels is quoted at 5 V and 1 mA in a clean environment, which is useful when the contact feeds a PLC input rather than a coil.
Standards and safety function of the XB5AS8442
The standards named in the datasheet include IEC 60947-5-5, ISO 13850, IEC 60204-1 and IEC 60364-5-53. These are the documents the product data refers to, and a machine builder remains responsible for the safety function and the risk assessment of the whole machine.
Mechanical life is 300,000 cycles, a lower figure than a normal push-button because an emergency stop is an infrequent, deliberate operation. Test it on a regular schedule: press, confirm the stop, reset and confirm a restart is still needed.
Technical specifications of the XB5AS8442
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / XB5AS8442 |
| Range | Harmony XB5 |
| Product type | Emergency switching off push-button / Emergency stop push-button |
| Operator | Red mushroom Ø40 mm, unmarked |
| Latching / reset | trigger action and mechanical latching; Turn to release |
| Contacts | 1 NC, positive opening |
| Terminal marking (ISO) | (11-12)NC |
| Mounting diameter | 22.5 mm |
| Dimensions (H x W x D) | 43 mm × 40 mm × 82 mm |
| Mechanical durability | 300,000 cycles |
| Thermal current [Ith] | 10 A |
| Insulation voltage [Ui] | 600 V, pollution degree 3 |
| Impulse withstand [Uimp] | 6 kV |
| Degree of protection | IP66, IP67, IP69, IP69K |
| Operating temperature | -40 to 70 °C |
| Storage temperature | -40 to 70 °C |
| Certifications | CSA, Lloyd’s Register (LROS), BV, UL listed, DNV |
| Warranty | 18 months |
Selection checklist and RFQ information for XB5AS8442
Send the points below so that the part number can be confirmed against the datasheet and checked for availability in one reply.
- Part number XB5AS8442 and the required quantity.
- Reset method (turn to release) and contacts (1 NC).
- Whether the project requires ISO 13850 or IEC 60947-5-5 listing in the datasheet.
- Key arrangement if a key release is chosen.
- Depth available behind the panel.
- Delivery location in Oman or the GCC and the lead time you need.
Typical uses of XB5AS8442 in Oman and the GCC
Latching emergency stops are fitted to control stations, pump and compressor panels, conveyors, crane pendants, test benches and packaged skids across industrial sites in the region. In oil and gas and petrochemical plants they are placed at escape routes and at local panels; in power and desalination plants they sit at dosing and pump stations where heat, dust and humidity are normal. The turn-release version is the common general-purpose choice.
Documents and quotation
The Schneider Electric datasheet for the XB5AS8442 is attached on this page for your technical file. It carries the electrical, mechanical and environmental data summarised above, together with the dimension drawing and the panel cut-out details.
To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.
Other Models in the Se Xb5 Estop Range
Seven Star LLC supplies models from the Se Xb5 Estop range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric XB5AS542N Turn-Release E-Stop 1 NC | Automation Accessories | View details |
| Schneider Electric XB5AS8442 Turn-Release E-Stop 1 NC | Automation Accessories | You are viewing this model |
| Schneider Electric XB5AS8444 Turn-Release E-Stop 2 NC | Automation Accessories | View details |
| Schneider Electric XB5AS9442 Key-Release E-Stop 1 NC | Automation Accessories | View details |
| Schneider Electric XB5AS9445 Key-Release E-Stop 1 NC + 1 NO | Automation Accessories | View details |
| Schneider Electric XB5AT842 Push-Pull E-Stop 1 NC | Automation Accessories | View details |
Datasheets & Documents
- Datasheet Schneider Electric XB5AS8442 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric XB5AS8442 Turn-Release E-Stop 1
Answers from our engineering team on installation, compatibility and integration.
01How is the XB5AS8442 reset?
By turn to release, according to the datasheet. The head latches mechanically when pressed.
02What contacts does the XB5AS8442 have?
The datasheet lists one normally closed (NC) contact with positive opening to IEC 60947-5-1 appendix K.
03What panel hole does the XB5AS8442 need?
A 22.5 mm round hole; the body is 82 mm deep behind the panel.
04Which standards does the datasheet list for the XB5AS8442?
CSA C22.2 No 14, IEC 60204-1, IEC 60364-5-53, IEC 60947-1, IEC 60947-5-1, IEC 60947-5-4, IEC 60947-5-5, ISO 13850, JIS C8201-1, JIS C8201-5-1, UL 508.
05Does Seven Star LLC supply the XB5AS8442 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.


















Reviews
There are no reviews yet.