- Automation & ControlView all 2,750 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Samson
Samson 3731-5 Ex d FOUNDATION Fieldbus Positioner
Description
Samson 3731-5 is the flameproof (Ex d) member of the Series 3731 positioner range, built for plants that run FOUNDATION fieldbus in hazardous zones. A thick-walled aluminium enclosure with threaded covers contains the explosion, so the electronics can stay ordinary while the device is installed directly on a valve in Zone 1. The unit takes its power from the fieldbus pair, positions pneumatic linear or rotary valves, and carries a PID controller block. The details below come from the manufacturer’s data sheet T 8387-5, edition December 2017.
Why choose the Ex d 3731-5 instead of an intrinsically safe unit
Intrinsically safe positioners need barriers or FISCO-rated power supplies that limit the energy on each segment, which restricts the number of devices per trunk. The 3731-5 uses flameproof protection, and the certificate lists variants such as II 2G Ex db IIC T6 Gb, Ex db eb IIC T6 Gb and Ex db [ia Ga] IIC T6 Gb. This allows a normal bus power supply with a greater device count. The one-knob operation also works in the hazardous area, so a technician can tune it on site without a laptop.
Specifications: Samson 3731-5 data at a glance
| Rated travel on Type 3277 (direct) | 3.6 to 30 mm |
|---|---|
| Rated travel, IEC 60534-6 NAMUR | 3.6 to 200 mm |
| Rotary actuator angle | 24 to 100 degrees, VDI/VDE 3845 |
| Bus interface | IEC 61158-2, bus-powered, 9 to 32 V DC, 15 mA maximum |
| Physical layer class | 113 without explosion protection, 111 explosion-protected |
| Field device concepts | FM 3610 entity and FISCO |
| Supply air, versions -521 and -527 | 1.4 to 7 bar (20 to 105 psi) |
| Supply air, version -523 | 1.4 to 6 bar (20 to 90 psi) |
| Output signal pressure | 0 bar up to supply pressure |
| Transit time | up to 240 s, set separately for exhaust and supply |
| Hysteresis / sensitivity | up to 0.3 percent / up to 0.1 percent |
| Ambient temperature | -40 to +80 C |
| Storage temperature | -60 to +80 C |
| Cable entries | two tapped holes, 1/2 NPT or M20x1.5; terminals for 2.5 mm2 |
| Protection | IP 66 / NEMA 4X |
| Weight | about 2.5 kg |
| Enclosure | Die-cast aluminium EN AC-43400, chromate and powder coated; external metal parts stainless steel 1.4404 |
| Air consumption | less than about 110 normal litres per hour |
Fieldbus behaviour
Two firmware families exist. Firmware 1.4x corresponds to FF Device Revision 1 and was tested against ITK 4.6, with execution times of 20 ms for AO, 40 ms for DI and 60 ms for PID. Firmware 1.6x corresponds to Device Revision 3, passed ITK 6.2.0, and runs AO in 30 ms, DI in 20 ms and PID in 40 ms. Knowing which revision your host system expects avoids a commissioning surprise. The function block list covers PID, analog output, and two discrete inputs, one for DC voltage signals and one for a floating contact.
Variants identified by the suffix
- -521 carries ATEX, IECEx, CCC, CCoE and Russian-market approvals for Ex d, Ex d e and Ex d [ia] protection
- -523 is the North American version with CSA and FM listings for Class I Zone 1 and Division 1 and 2 groups B, C and D
- -524 is covered by the Eurasian approval for Ex d IIC T6, T5 and T4 plus dust protection
- -527 carries the Japanese JIS certificate TC17747 for Ex d IIC T6
When you quote 3731-5, give the complete type code so the correct approval set is supplied; the base type alone does not define the certificate.
How 3731-5 differs from other Series 3731 and 3730 positioners
Compared with the non-flameproof Samson 3730-5, the 3731-5 reduces maximum travel from 300 mm to 200 mm and weighs 2.5 kg instead of about 1.0 kg. It has no multiple analog input or output blocks; its function set is PID, AO and DI. Its ambient range starts at minus 40 degrees without a special version, while the 3730-5 needs a metal gland to reach minus 45. The HART version, Type 3731-3, shares the same Ex d enclosure but communicates on 4 to 20 mA instead of the fieldbus.
Options
A galvanically isolated binary input can read either a 0 to 30 V DC signal, where above 5 V is logic one and below 3 V logic zero, or an external floating contact whose resistance must remain under 100 ohm at 100 mA. A forced venting input accepts 0 to 40 V DC or 0 to 28 V AC; at 3 V or less the valve goes to its fail-safe position, and above 5.5 V it operates normally. Both options draw very little current.
Applications across Gulf process sites
Oil terminals, gas compression stations, petrochemical units and fuel storage farms in Oman and the GCC frequently classify the area around valve manifolds as Zone 1 with group IIC gases. There the 3731-5 avoids a separate explosion-proof junction box. Fertiliser and methanol units with FOUNDATION fieldbus control rooms benefit from valve diagnostics through EXPERTplus, documented in data sheet T 8389.
Commissioning and care
The closing direction is told to the positioner, which assigns the closed position to 0 percent. Initialisation then runs with the preset parameters; four initialisation modes exist. Configuration with TROVIS-VIEW needs database module 3731-5 through the SSP interface. Never open the flameproof covers while the circuit is live in the hazardous area unless the certificate permits it. Check cover threads for corrosion during turnarounds, keep air clean to ISO 8573-1 class 4, 3, 3 and confirm that the cable glands match the thread type.
Documents and quotation
The data sheet for Samson 3731-5 is attached. Please include 3731-5, the exact approval code you need, quantity, valve travel or angle, and the actuator in your RFQ. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Selection Notes for the Samson 3731-5
When comparing the Samson 3731-5 with alternatives, start from the duty it must perform: the measured or controlled variable, the range and accuracy you need, the environment at the mounting point and the interface to your control system. Check the electrical and mechanical connections against the installed equipment, and confirm any hazardous-area or ingress-protection requirements for the location. If any point is unclear, send a photo of the nameplate and a short description of the application, and we will compare it with the Samson valve positioners range and confirm the correct order code before you commit.
Datasheets & Documents
- Datasheet Samson 3731-5 Ex d FOUNDATION Fieldbus Positioner Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
SAMSON is a German manufacturer of control valves, actuators, positioners and self-operated regulators. Hermann Sandvoss founded the company in Düsseldorf on 1 April 1907, and its first important product was a thermostatic valve that controlled temperature without external power. After moves to Mannheim, SAMSON settled in Frankfurt am Main in 1916, where SAMSON AG is still headquartered.
Seven Star LLC supplies Samson control valves, pneumatic actuators and positioners to process plants in Oman, including the types listed on this page and their replacement units.
Samson company profile
| Founded | 1 April 1907, Düsseldorf, by Hermann Sandvoss, as VULCAN Technische Apparate Baugesellschaft; products sold under the SAMSON name |
|---|---|
| Headquarters | Frankfurt am Main, Germany, since 1916 |
| Legal form | SAMSON AG |
| First product | A self-operated thermostatic valve |
| Group brands | SAMSON together with PFEIFFER, LEUSCH, VETEC and AIR TORQUE |
| Product families | Globe valves such as Type 3241, rotary and butterfly valves, 3271 and 3277 pneumatic actuators, 3730 and 3731 positioners, self-operated pressure and temperature regulators |
Milestones
- 1907: Hermann Sandvoss founds the company in Düsseldorf.
- 1909: It is re-established as SAMSON Apparatebau GmbH.
- 1916: After a period in Mannheim, the company moves to Frankfurt am Main.
- 1975: The name becomes SAMSON Mess- und Regeltechnik.
Samson valve, actuator and positioner types
Samson builds a control valve from modules. The Type 3241 globe valve is the general-service body of Series 240, and the Type 3251 is the Series 250 body for higher pressure ratings. Either one is combined with a Type 3271 pneumatic diaphragm actuator or a Type 3277, whose yoke allows the positioner to be attached directly with a concealed travel linkage.
Among the positioners listed are the Type 3725 and the Type 3730 family: the 3730-1 as the basic electropneumatic version, sold in its current generation as TROVIS 3730-1, and the 3730-3 with HART communication and valve diagnostics. Samson also makes PROFIBUS PA and FOUNDATION fieldbus variants in the same family, plus self-operated pressure and temperature regulators.
Where Samson valves are used
Samson control valves throttle steam, gas and liquids in chemical and petrochemical units, refineries, gas processing, power stations, water and desalination plants, and food production. Many reach site as part of a skid or package, so the plant instrument team often meets them first when a positioner or actuator needs replacing. We supply these items to end users and contractors throughout the GCC.
Samson products we list
Ordering Samson parts: what we need
Every Samson device has a nameplate with the type, a configuration ID (Var-ID) and a serial number. A photo of that plate is the surest route to an exact match. Without it, please send:
- Valve: type, DN or NPS, pressure rating, body and trim material, Kvs or Cv, plug and seat style, packing and bonnet type
- Actuator: type, effective area in cm², bench range, fail action and travel
- Positioner: full type code including Ex protection, communication and options such as limit switches or position transmitter
We check the code against Samson documentation and provide the manufacturer's data sheet on request.
Facts checked against SAMSON's corporate chronicle and press material, October 2026.
Browse Samson products by category: Control Valves, Valve Positioner, Valve Actuator.
FAQ
Questions about the Samson 3731-5 Ex d FOUNDATION Fieldbus Positioner
Answers from our engineering team on installation, compatibility and integration.
01Is Samson 3731-5 an intrinsically safe device?
No, it is a flameproof Ex d positioner with enclosure certificates such as II 2G Ex db IIC T6 Gb, plus an optional Ex ia sensor variant.
02What is the maximum travel of 3731-5?
Rated travel on NAMUR or rod-type attachment reaches 200 mm; direct attachment to a Type 3277 actuator gives 3.6 to 30 mm.
03How much does the 3731-5 weigh?
The data sheet lists about 2.5 kg for the die-cast aluminium enclosure with stainless steel external metal parts.
04What supply air does 3731-5 need?
Versions -521 and -527 take 1.4 to 7 bar, while version -523 takes 1.4 to 6 bar, with ISO 8573-1 class 4, 3, 3 air.
05Which software configures 3731-5?
TROVIS-VIEW with database module 3731-5 connects through the SSP interface and serial adapter for local configuration.


















Reviews
There are no reviews yet.