- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Samson
Samson 6126 Current-to-Pressure and Voltage Converter
Description
Samson 6126 current-to-pressure and voltage-to-pressure converter
The Samson 6126 is a compact electropneumatic converter that turns a standard electrical control signal into a pneumatic output signal. Datasheet T 6126 lists two forms: a current-to-pressure version taking 0/4 to 20 mA, and a voltage-to-pressure version taking 0/2 to 10 V from a 24 V DC auxiliary supply. The output is 0.2 to 1 bar (3 to 15 psi) or 0.4 to 2 bar (6 to 30 psi), with special ranges up to 5 bar (75 psi) when the 6112 i/p module is used.
It is small, light (approx. 0.6 kg) and rugged, with an optional pressure gauge on the output and a mounting bracket in the scope of delivery. Seven Star LLC supplies the Samson 6126 in Oman and the GCC as an independent supplier in Muscat for plants that drive pneumatic valves and controllers from a DCS or PLC.
How the 6126 differs from the 6116 and 6111
All three are Samson i/p converters with the same force-balance principle. The 6126 is the compact version with a voltage-input option, central venting through a vent plug, a 5 bar output limit and a wall, pipe or valve bracket, while the 6116 offers explosion-protected versions and up to 8 bar output, and the 6111 is built as a rail-mounting or offshore field unit. The datasheet T 6126 covers the 6126-0 version for non-hazardous areas, with or without electronics.
6126 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Samson / 6126 (i/p and u/p converter, datasheet T 6126, version 6126-0) |
| Input | 0/4 to 20 mA; or 0/2 to 10 V (30 kΩ input resistance) with 24 V DC supply |
| Load impedance | ≤ 6 V, corresponding to 300 Ω at 20 mA |
| Auxiliary power (voltage version) | 10 to 28 V DC; 9 to 25 mA (maximum 30 mA) |
| Output | 0.2 to 1 bar (3 to 15 psi) or 0.4 to 2 bar (6 to 30 psi); special ranges up to 5 bar (75 psi) with 6112 module |
| Air output capacity | 2.0 m³/h at 0.6 bar; 2.5 m³/h at 1.2 bar |
| Supply air | At least 0.4 bar above the upper range value, maximum 5.4 bar (80 psi) without a pressure regulator |
| Air consumption | 0.08 mn³/h at 1.4 bar; 0.1 mn³/h at 2.4 bar |
| Accuracy figures | Linear characteristic; hysteresis ≤ 0.3 %; conformity deviation ≤ 1 % of final value |
| Dynamic response | Limiting frequency 5.3 Hz; phase shift –130° (per IEC 60770-1) |
| Ambient temperature | –25 to +70 °C |
| Enclosure | IP 54 / IP 65; die-cast aluminum, chromated and plastic coated, or glass-fiber-reinforced polyamide; approx. 0.6 kg |
| Mounting | Bracket 1400-7432 included for wall mounting; 1400-6216 wall and pipe; 1400-6217 cast-yoke valve; 1400-6218 rod-type yoke |
How the 6126 works
The input current passes through a plunger coil in a permanent-magnet field, producing a force on a balance beam that is opposed by the back-pressure from a nozzle and flapper. A rising current moves the flapper closer to the nozzle, which raises the cascade pressure and drives the volume booster diaphragm so that more air reaches the output. When the current falls, the booster vents the excess air through the central vent until the forces balance again.
On 4 to 20 mA modules with electronics there is a slide switch for the switch-off function: when the signal drops below about 4.08 mA the output vents to under 100 mbar, which supports tight closing of a valve. Zero and span are adjusted with potentiometers on units with electronics.
Where the 6126 fits and related Samson parts
The 6126 is normally fitted close to the valve, directly on the yoke or on a pipe or wall near it, and feeds a pneumatic positioner such as the 3766, 4765 or a diaphragm actuator. Related converters are the 6116 and 6111, the 6132 p/i converter for the opposite signal direction, and the Series 3730 electropneumatic positioners when full smart positioning is wanted.
6126 selection and ordering checklist
- Input type: 0/4 to 20 mA current or 0/2 to 10 V voltage (needs 24 V DC supply).
- Output range and the module (6109 or 6112), including any special range or reversed characteristic.
- Electronics fitted (zero and span potentiometers, switch-off) or not.
- Pressure gauge on the output and the mounting bracket needed.
- Supply air pressure available, to stay within 5.4 bar without a regulator.
Installation, commissioning and maintenance of the 6126
Install the converter horizontally with the gauge or screw plug facing up. If it must be mounted another way, correct the zero with the ZERO adjuster on versions with electronics. Make the electrical connection through the angle connector according to DIN EN 175301-803 A.
Commission by applying the lower and upper signal values and trimming zero and span. In service the converter needs clean dry air to the ISO 8573-1 classes; replace the supply filter element on schedule and keep the vent plug free so the central venting works.
Typical applications of the 6126 in Oman and the GCC
Pneumatic valve actuators and pneumatic controllers remain common in oil and gas, water treatment and power plants across the Gulf, and the 6126 provides a low-cost, robust interface between electronic outputs and those actuators. With a range of –25 to +70 °C and IP 65 versions, it suits outdoor skids, though a sun shade is advisable at hot sites.
Information to send with an RFQ for the 6126
- Input signal, output pressure range and power supply.
- Mounting style and gauge requirement.
- Air supply pressure and quality.
- Quantity and spare converter modules.
- Delivery location.
Site conditions in Oman for the 6126
Valves and their accessories in Oman work in demanding conditions: high ambient temperatures, direct sun on outdoor pipe racks, dust, and corrosive coastal air at many oil, gas and water sites. When you specify the 6126, confirm the pressure and temperature ratings, body and trim materials and any sour-service or hazardous-area requirements against the actual line data, and check that seals and soft parts suit the process medium and the full temperature range.
For reliable operation, plan access for maintenance, define which spare parts are kept on site, and record the configuration of each installed 6126. Sending the complete process data sheet with your RFQ allows the selection to be checked before the order is placed.
Documents and quotation
The Samson datasheet T 6126 for the 6126 converter is attached on this page.
Send the signal and pressure ranges, and Seven Star LLC will quote the Samson 6126 converter.
Other Models in the Samson Ip Converters Range
Seven Star LLC supplies models from the Samson Ip Converters range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Samson 6116 i/p Converter for 4-20 mA to Pneumatic Signal | Valve Positioners | View details |
| Samson 6111 i/p Converter, Rail and Offshore Field Unit | Valve Positioners | View details |
| Samson 6126 Current-to-Pressure and Voltage Converter | Valve Positioners | You are viewing this model |
| Samson 6132 p/i Converter, Four-Wire, Pneumatic to 4-20 mA | Valve Positioners | View details |
Datasheets & Documents
- Datasheet Samson 6126 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
SAMSON is a German manufacturer of control valves, actuators, positioners and self-operated regulators. Hermann Sandvoss founded the company in Düsseldorf on 1 April 1907, and its first important product was a thermostatic valve that controlled temperature without external power. After moves to Mannheim, SAMSON settled in Frankfurt am Main in 1916, where SAMSON AG is still headquartered.
Seven Star LLC supplies Samson control valves, pneumatic actuators and positioners to process plants in Oman, including the types listed on this page and their replacement units.
Samson company profile
| Founded | 1 April 1907, Düsseldorf, by Hermann Sandvoss, as VULCAN Technische Apparate Baugesellschaft; products sold under the SAMSON name |
|---|---|
| Headquarters | Frankfurt am Main, Germany, since 1916 |
| Legal form | SAMSON AG |
| First product | A self-operated thermostatic valve |
| Group brands | SAMSON together with PFEIFFER, LEUSCH, VETEC and AIR TORQUE |
| Product families | Globe valves such as Type 3241, rotary and butterfly valves, 3271 and 3277 pneumatic actuators, 3730 and 3731 positioners, self-operated pressure and temperature regulators |
Milestones
- 1907: Hermann Sandvoss founds the company in Düsseldorf.
- 1909: It is re-established as SAMSON Apparatebau GmbH.
- 1916: After a period in Mannheim, the company moves to Frankfurt am Main.
- 1975: The name becomes SAMSON Mess- und Regeltechnik.
Samson valve, actuator and positioner types
Samson builds a control valve from modules. The Type 3241 globe valve is the general-service body of Series 240, and the Type 3251 is the Series 250 body for higher pressure ratings. Either one is combined with a Type 3271 pneumatic diaphragm actuator or a Type 3277, whose yoke allows the positioner to be attached directly with a concealed travel linkage.
Among the positioners listed are the Type 3725 and the Type 3730 family: the 3730-1 as the basic electropneumatic version, sold in its current generation as TROVIS 3730-1, and the 3730-3 with HART communication and valve diagnostics. Samson also makes PROFIBUS PA and FOUNDATION fieldbus variants in the same family, plus self-operated pressure and temperature regulators.
Where Samson valves are used
Samson control valves throttle steam, gas and liquids in chemical and petrochemical units, refineries, gas processing, power stations, water and desalination plants, and food production. Many reach site as part of a skid or package, so the plant instrument team often meets them first when a positioner or actuator needs replacing. We supply these items to end users and contractors throughout the GCC.
Samson products we list
Ordering Samson parts: what we need
Every Samson device has a nameplate with the type, a configuration ID (Var-ID) and a serial number. A photo of that plate is the surest route to an exact match. Without it, please send:
- Valve: type, DN or NPS, pressure rating, body and trim material, Kvs or Cv, plug and seat style, packing and bonnet type
- Actuator: type, effective area in cm², bench range, fail action and travel
- Positioner: full type code including Ex protection, communication and options such as limit switches or position transmitter
We check the code against Samson documentation and provide the manufacturer's data sheet on request.
Facts checked against SAMSON's corporate chronicle and press material, October 2026.
Browse Samson products by category: Control Valves, Valve Positioner, Valve Actuator.
FAQ
Questions about the Samson 6126 Current-to-Pressure and Voltage
Answers from our engineering team on installation, compatibility and integration.
01What inputs can the Samson 6126 accept?
It accepts a load-independent 0/4 to 20 mA signal, or a 0/2 to 10 V signal in the voltage-to-pressure version, which needs a 24 V DC auxiliary supply.
02What output pressures are available?
Standard outputs are 0.2 to 1 bar (3 to 15 psi) and 0.4 to 2 bar (6 to 30 psi). Special ranges up to 5 bar are possible with the 6112 module.
03Does it need a supply pressure regulator?
Not up to a supply of 5.4 bar (80 psi). The supply must be at least 0.4 bar above the upper signal pressure.
04How can the 6126 be mounted?
It can be fixed to a wall or pipe, or directly to a control valve with a cast or rod-type yoke. A wall bracket is included in the scope of delivery.
05What is the ambient temperature range?
The datasheet gives –25 to +70 °C with protection class IP 54 or IP 65 depending on the version.


















Reviews
There are no reviews yet.