- Automation & ControlView all 2,612 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Samson
Samson 6132 p/i Converter, Four-Wire, Pneumatic to 4-20 mA
Description
Samson 6132 p/i converter, pneumatic signal to 4-20 mA or voltage
The Samson 6132 works in the opposite direction to the i/p converters: it measures a pneumatic signal and converts it into a standardized electrical signal. The datasheet T 6132 describes it as an interface between pneumatic and electric measuring and control units, used for example to connect pneumatic transmitters to electric controllers, computers or process control systems. The input is 0.2 to 1 bar (3 to 15 psi), the output is a load-independent DC current or a DC voltage signal.
The 6132 is designed for four-wire connection, meaning it has a separate power supply, and it is built as a rail-mounting unit for 35 mm top-hat rails. Seven Star LLC supplies the Samson 6132 in Oman and the GCC as an independent supplier in Muscat for plants that are modernizing from pneumatic to electronic loops without replacing every field transmitter.
Decoding the 6132 article code
| Position | Options in the datasheet |
|---|---|
| Explosion protection | 0 = without |
| Version | 4 = rail-mounting unit |
| Supply voltage | 1 = 24 V DC; 2 = 230 V AC; 3 = 115 V AC; 4 = 24 V AC |
| Input | 1 = 0.2 to 1 bar; 2 = 3 to 15 psi |
| Output | 0 = 0 to 20 mA; 1 = 4 to 20 mA; 2 = 0 to 10 V; 3 = 2 to 10 V |
Output type and range (mA or V) can be changed with switches inside the device, so one unit can serve several signal conventions. The 6132-04 designation in the datasheet refers to the rail-mounting version.
6132 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Samson / 6132 (p/i converter, four-wire, datasheet T 6132, type 6132-04) |
| Input | 0.2 to 1 bar (3 to 15 psi), overloadable up to 2 bar |
| Output | 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, 0 to 5 V or 1 to 5 V, selected by switches |
| Permissible load | ≤ 750 Ω at 20 mA current output; ≥ 2 kΩ for voltage output |
| Supply voltage | 24 V DC (18 to 36 V) 1.5 W; or 230, 115 or 24 V AC (–15/+10 %) 50/60 Hz, 3 VA |
| Accuracy figures | Hysteresis ≤ 0.05 %; linearity deviation ≤ 0.02 %; dead band ≤ 0.03 %; ripple ≤ 0.05 % (of output span) |
| Temperature effect | ≤ 0.15 % per 10 K for zero and span |
| Adjustment | Lower range value and span by potentiometers on the front panel, about ± 10 % |
| Ambient temperature | –20 to +70 °C; storage and transport –40 to +85 °C |
| Protection | IP20; protection class I; overvoltage category II; pollution degree 2 |
| Weight | Approx. 0.32 kg (AC supply) or 0.25 kg (DC supply) |
| Connections | Air hose 4 mm inside / 6 mm outside diameter; terminals for 0.5 to 2.5 mm² wire; 35 mm top-hat rail per DIN EN 60715 |
How the 6132 converts air pressure into an electric signal
A capacitive ceramic pressure sensor converts the pneumatic input pressure into a small DC voltage. A measuring amplifier brings this voltage to a defined level, and the zero and span potentiometers on the front panel make fine corrections. The output stage then issues a current or voltage independent of the load. A power supply unit with galvanic isolation feeds the electronics from the selected mains or DC voltage.
The capacitive transducer gives a good dynamic response and low hysteresis, which matters when the signal is used for a controller loop rather than only for indication.
Where the 6132 fits and related Samson parts
Typical use is behind a pneumatic transmitter, such as the Samson 3804-1 pressure transmitter or a legacy pneumatic flow or level transmitter, bringing the signal to a DCS or PLC analog input card. The matching two-wire version for loop-powered operation is the Type 6134, and the opposite direction is covered by the 6111, 6116 and 6126 i/p converters.
6132 selection and ordering checklist
- Input range: 0.2 to 1 bar or 3 to 15 psi.
- Output: current (0 or 4 to 20 mA) or voltage (0/2 to 10 V, with 0 to 5 V and 1 to 5 V also set by switches).
- Supply voltage: 24 V DC, 24 V AC, 115 V AC or 230 V AC.
- Load on the output and the length of signal cabling.
- Panel space on a 35 mm top-hat rail.
Installation, commissioning and maintenance of the 6132
Mount the unit in any position on the rail, connect the pneumatic input with 4 x 6 mm tubing, and wire the supply and output on the terminals. Choose the output range by setting the internal switches before powering up. After applying a known pressure at the input, trim the lower range value and the span with the front potentiometers.
There is little to maintain apart from keeping the air clean and dry, because moisture or oil entering the sensor can drift the zero. A periodic check with a pressure calibrator at 0.2 and 1 bar is sensible in plants with strict loop-check routines.
Typical applications of the 6132 in Oman and the GCC
Older oil and gas, power and water installations in the Gulf still contain pneumatic transmitters and controllers. A p/i converter lets such devices report into a modern control system without large rewiring. The IP20 housing belongs inside a cabinet, and the –20 to +70 °C range suits air-conditioned or ventilated rooms rather than open sun.
Information to send with an RFQ for the 6132
- Input range and signal source.
- Output signal required by the control system.
- Supply voltage on site.
- Quantity and cabinet details.
- Delivery location.
Site conditions in Oman for the 6132
Valves and their accessories in Oman work in demanding conditions: high ambient temperatures, direct sun on outdoor pipe racks, dust, and corrosive coastal air at many oil, gas and water sites. When you specify the 6132, confirm the pressure and temperature ratings, body and trim materials and any sour-service or hazardous-area requirements against the actual line data, and check that seals and soft parts suit the process medium and the full temperature range.
For reliable operation, plan access for maintenance, define which spare parts are kept on site, and record the configuration of each installed 6132. Sending the complete process data sheet with your RFQ allows the selection to be checked before the order is placed.
Documents and quotation
The Samson datasheet T 6132 for the 6132 converter is attached on this page.
Send the signal ranges and supply voltage, and Seven Star LLC will quote the Samson 6132 p/i converter.
Other Models in the Samson Ip Converters Range
Seven Star LLC supplies models from the Samson Ip Converters range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Samson 6116 i/p Converter for 4-20 mA to Pneumatic Signal | Valve Positioners | View details |
| Samson 6111 i/p Converter, Rail and Offshore Field Unit | Valve Positioners | View details |
| Samson 6126 Current-to-Pressure and Voltage Converter | Valve Positioners | View details |
| Samson 6132 p/i Converter, Four-Wire, Pneumatic to 4-20 mA | Valve Positioners | You are viewing this model |
Datasheets & Documents
- Datasheet Samson 6132 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
SAMSON is a German manufacturer of control valves, actuators, positioners and self-operated regulators. Hermann Sandvoss founded the company in Düsseldorf on 1 April 1907, and its first important product was a thermostatic valve that controlled temperature without external power. After moves to Mannheim, SAMSON settled in Frankfurt am Main in 1916, where SAMSON AG is still headquartered.
Seven Star LLC supplies Samson control valves, pneumatic actuators and positioners to process plants in Oman, including the types listed on this page and their replacement units.
Samson company profile
| Founded | 1 April 1907, Düsseldorf, by Hermann Sandvoss, as VULCAN Technische Apparate Baugesellschaft; products sold under the SAMSON name |
|---|---|
| Headquarters | Frankfurt am Main, Germany, since 1916 |
| Legal form | SAMSON AG |
| First product | A self-operated thermostatic valve |
| Group brands | SAMSON together with PFEIFFER, LEUSCH, VETEC and AIR TORQUE |
| Product families | Globe valves such as Type 3241, rotary and butterfly valves, 3271 and 3277 pneumatic actuators, 3730 and 3731 positioners, self-operated pressure and temperature regulators |
Milestones
- 1907: Hermann Sandvoss founds the company in Düsseldorf.
- 1909: It is re-established as SAMSON Apparatebau GmbH.
- 1916: After a period in Mannheim, the company moves to Frankfurt am Main.
- 1975: The name becomes SAMSON Mess- und Regeltechnik.
Samson valve, actuator and positioner types
Samson builds a control valve from modules. The Type 3241 globe valve is the general-service body of Series 240, and the Type 3251 is the Series 250 body for higher pressure ratings. Either one is combined with a Type 3271 pneumatic diaphragm actuator or a Type 3277, whose yoke allows the positioner to be attached directly with a concealed travel linkage.
Among the positioners listed are the Type 3725 and the Type 3730 family: the 3730-1 as the basic electropneumatic version, sold in its current generation as TROVIS 3730-1, and the 3730-3 with HART communication and valve diagnostics. Samson also makes PROFIBUS PA and FOUNDATION fieldbus variants in the same family, plus self-operated pressure and temperature regulators.
Where Samson valves are used
Samson control valves throttle steam, gas and liquids in chemical and petrochemical units, refineries, gas processing, power stations, water and desalination plants, and food production. Many reach site as part of a skid or package, so the plant instrument team often meets them first when a positioner or actuator needs replacing. We supply these items to end users and contractors throughout the GCC.
Samson products we list
Ordering Samson parts: what we need
Every Samson device has a nameplate with the type, a configuration ID (Var-ID) and a serial number. A photo of that plate is the surest route to an exact match. Without it, please send:
- Valve: type, DN or NPS, pressure rating, body and trim material, Kvs or Cv, plug and seat style, packing and bonnet type
- Actuator: type, effective area in cm², bench range, fail action and travel
- Positioner: full type code including Ex protection, communication and options such as limit switches or position transmitter
We check the code against Samson documentation and provide the manufacturer's data sheet on request.
Facts checked against SAMSON's corporate chronicle and press material, October 2026.
Browse Samson products by category: Control Valves, Valve Positioner, Valve Actuator.
FAQ
Questions about the Samson 6132 p/i Converter, Four-Wire, Pneumatic to
Answers from our engineering team on installation, compatibility and integration.
01What does the Samson 6132 do?
It converts a pneumatic signal of 0.2 to 1 bar (3 to 15 psi) into an electrical current or voltage signal, so pneumatic transmitters can feed electric controllers or control systems.
02Is the 6132 loop powered?
No. It is a four-wire device with a separate supply of 24 V DC or 24, 115 or 230 V AC. The Type 6134 is the two-wire version.
03What output signals can be selected?
Outputs of 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, 0 to 5 V or 1 to 5 V are selected with switches inside the device.
04How accurate is the 6132?
The datasheet gives hysteresis of 0.05 % or better and a linearity deviation of 0.02 % or better, with a temperature effect of 0.15 % per 10 K.
05How is the 6132 mounted?
It clips onto a 35 mm top-hat rail per DIN EN 60715 in any position and has IP20 protection, so it belongs inside a cabinet.


















Reviews
There are no reviews yet.