- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm PG2453 Pressure Sensor with Analogue Display, -1 to 25 bar
Description
ifm PG2453 Pressure Sensor with Analogue Display, -1 to 25 bar
The ifm PG2453 is an analogue display pressure gauge, pressure switch and transmitter in one unit. Its measuring range is -1 to 25 bar, the process connection is a G 1/2 external thread, overload is 100 bar and burst pressure is above 350 bar. The rotatable display uses an LED bar graph to show the switch point and is readable from a distance.
The switching output is programmable and the analogue output is 4 to 20 mA, scalable and invertible. The 18 to 32 V DC supply draws below 70 mA, and the stainless housing is protected to IP67 and IP69K. Seven Star LLC supplies the ifm PG2453 in Oman and the GCC as an independent supplier in Muscat.
PG2453 technical specifications
The table lists the values published by the manufacturer for the PG2453. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / PG2453 |
| Measuring range | -1 to 25 bar / -14.5 to 362.5 psi |
| Process connection | threaded connection G 1/2 external thread |
| Dimensions [mm] | 169 x 100 x 57 |
| Media | liquids and gases |
| Medium temperature [°C] | -25 to 80 |
| Min. burst pressure | 350 bar / 5070 psi / 30 MPa |
| Pressure rating | 100 bar / 1450 psi / 10 MPa |
| Type of pressure | relative pressure; vacuum |
| Operating voltage [V] | 18 to 32 DC |
| Current consumption [mA] | < 70 (24 V) |
| Output signal | switching signal; analogue signal (configurable) |
| Electrical design | PNP/NPN |
| Output function | normally open / normally closed (parameterisable) |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 75 |
| Analogue current output [mA] | 4 to 20, invertible; (scalable) |
| Switch point accuracy [% of the span] | < ± 0.5 (Turn down 1:1) |
| Repeatability [% of the span] | < ± 0.1 (with temperature fluctuations < 10 K; Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0.1 (Turn down 1:1; per 6 months) |
| Response time [ms] | < 9 |
| Ambient temperature [°C] | -20 to 80 |
| Protection | IP 67; IP 69K |
| Min. pressure cycles | 100 million |
| Weight [g] | 563.9 |
| Materials | stainless steel (316L/1.4404); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm |
| Materials (wetted parts) | Al2O3 (ceramics); FKM; stainless steel (316L/1.4404) |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
| MTTF [years] | 103 |
How the PG2453 works
Inside the PG2453 a ceramic-capacitive measuring cell converts process pressure into a small change in capacitance. The electronics linearise that signal, compensate for temperature and compare the result with the switch points you have stored. The red/green four-digit display shows the live value in the unit you select, while two yellow LEDs mirror the state of the two outputs. Because the cell is ceramic and the wetted parts are limited to stainless steel, ceramic and FKM, the same sensor handles liquids and gases without an isolating diaphragm. One output can run in IO-Link mode, which lets a controller read the pressure as process data and push parameters back to the sensor after a replacement.
Where the PG2453 fits and related parts
The PG2453 replaces a gauge plus a transmitter plus a switch, which suits panels with limited space. The PN2094 uses a digital display and a smaller thread, while the PX3223 is a transmitter without display for 0 to 500 psi.
Selection and ordering checklist for the PG2453
Work through the points below before you confirm the order, so that the PG2453 you receive is the one your machine or plant needs.
- Confirm the -1 to 25 bar range
- Confirm the G 1/2 external thread
- Check ambient -20 to 80 degrees Celsius
- Choose switch point and analogue scaling
- Confirm the 18 to 32 V DC supply
The manufacturer lists this article under the type designation Pressure sensor with analogue display, PG-025-REB12-MFRKG/US/ /P. The article number PG2453 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Fit the sensor with a suitable sealing washer or O-ring for the thread form and tighten within the torque window printed in the table; over-tightening a ceramic cell is a common cause of zero shift. Mount it so that the connector points downward or sideways, which keeps condensation from running into the M12 interface, and rotate the process connection to align the display before final tightening. During commissioning set the unit, then the switch points and hysteresis or window, and decide whether each output is normally open or normally closed. Check that the supply stays inside 18 to 30 V DC under load. For maintenance, a periodic zero check against atmosphere on a vented line and a look at the connector for moisture are normally enough. In pulsating systems such as piston pumps, a restrictor or damper protects the cell and steadies the reading.
Typical applications in Oman and the GCC
Pump stations, compressors, filtration skids and hydraulic power units. In Oman and the GCC the large readable dial helps operators in bright sun and the IP69K housing resists washdown.
Pressure instruments in the Gulf face heat on sun-exposed skids, fine dust and salty humidity. Stainless steel wetted parts, a sealed M12 connection and a conservative pressure margin are the three things that decide service life. Mount the sensor out of direct sun where possible and keep the connector pointing down.
PG2453 compared with related ifm types
The table places the PG2453 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| PN2094 | -1 to 10 bar, G 1/4 int., 2 outputs, IO-Link | Related type |
| PG2453 | -1 to 25 bar, G 1/2 ext., LED bar graph, IP69K | This page |
| PX3223 | 0-500 psi, 1/4 NPT ext., 4-20 mA, ceramic | Related type |
| PN7094 | Pressure sensor -1 to 10 bar | Related type |
| PX3224 | Pressure transmitter | Related type |
Information to send with an RFQ for the PG2453
To prepare an accurate offer for the PG2453, please include the following with your enquiry:
- Required pressure range and whether the process is gauge, vacuum or compound
- Medium, temperature range and any pulsation or pressure spikes
- Process thread and the sealing material you need
- Connector or cordset requirements and the cable length
- Quantity, delivery location and whether IO-Link master ports are available
Documents and quotation
The official ifm data sheet for the PG2453 (document PG2453-00, English, issued 13 April 2023) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Other Models in the Ifm61 Press Range
Seven Star LLC supplies models from the Ifm61 Press range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| ifm PN2094 Pressure Sensor with Display, -1 to 10 bar, G 1/4 | Automation Accessories | View details |
| ifm PG2453 Pressure Sensor with Analogue Display, -1 to 25 bar | Automation Accessories | You are viewing this model |
| ifm PX3223 Pressure Transmitter 0-500 psi, 1/4 NPT, 4-20 mA | Automation Accessories | View details |
Datasheets & Documents
- Datasheet ifm PG2453 Data Sheet (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm PG2453 Pressure Sensor with Analogue Display,
Answers from our engineering team on installation, compatibility and integration.
01What range does the ifm PG2453 cover?
-1 to 25 bar. This is the value published by the manufacturer for the PG2453; confirm details before ordering.
02Does the PG2453 have an analogue output?
Yes, 4 to 20 mA, scalable and invertible. This is the value published by the manufacturer for the PG2453; confirm details before ordering.
03What process connection does the PG2453 have?
G 1/2 external thread. This is the value published by the manufacturer for the PG2453; confirm details before ordering.
04What protection does the PG2453 have?
IP67 and IP69K. This is the value published by the manufacturer for the PG2453; confirm details before ordering.
05What is the overload rating of the PG2453?
100 bar. This is the value published by the manufacturer for the PG2453; confirm details before ordering.


















Reviews
There are no reviews yet.