Brand:

Fisher CV500 Cam Vee-Ball Rotary Globe Control Valve

Description

Overview

The Fisher CV500 is a Cam Vee-Ball rotary globe control valve built around a cammed, segmented V-notched ball that cams into and out of a self-centering, self-lapping metal seat ring, combining wide flow rangeability with the inherent ruggedness of heavy-duty bearings and seals. Its integral flanges eliminate exposed line flange bolting, and the reversible metal seat ring, available in 316 stainless steel or Alloy 6, provides two usable shutoff surfaces that extend service life before the valve needs to be pulled for maintenance.

Seven Star LLC supplies the Fisher CV500 Cam Vee-Ball rotary globe control valve to oil and gas, petrochemical, refining, and power generation operators across Oman and the wider GCC, with lead time confirmed at quotation for this rugged Cam Vee-Ball rotary globe control valve.

Operating Principle

The Fisher CV500 operates through a cammed, segmented V-notched ball that rotates and cams in and out of contact with the seat ring rather than sliding across it continuously, which minimizes contact wear compared with a valve design where the closure member drags across the seat through the full stroke. This eccentric camming action is the defining trait of the Cam Vee-Ball design and is what allows the CV500 to hold Class IV shutoff per ANSI/FCI 70-2 in either flow direction while still delivering a modified equal-percentage flow characteristic with a flow coefficient rangeability of roughly 200 to 1.

The valve is field-reversible between push-down-to-close and push-down-to-open configurations, with counterclockwise rotation closing the valve through 90 degrees of travel. Because the ball only contacts the self-centering, self-lapping seat ring at the moment of closure, the CV500 tolerates entrained solids and fibrous material in the process stream far better than a valve design relying on continuous seat contact, an important advantage in dirty or slurry service.

Engineering Design of the Fisher CV500

Mechanically, the Fisher CV500 is a flanged valve body assembly with a reversible metal seat ring and a splined shaft connection between the ball and shaft. The valve is available in NPS 3, 4, 6, 8, 10, and 12 (DN 80, 100, 150, 200, 250, and 300), with raised-face or ring-type joint flanges built to ASME B16.5 or EN PN10 through PN100 flange standards, and pressure classes of CL150, CL300, and CL600 consistent with the applicable ASME or EN flange classification.

Sealed-bearing and purged-bearing construction options are available for the ball shaft, and trim and bolting materials compliant with NACE MR0175-2002 extend the CV500 into sour oil and gas service. The reversible S31600 stainless steel or R30006 Alloy 6 seat ring provides two shutoff surfaces per ring, and the valve pairs with a Fisher rotary actuator and integrates with Fisher FIELDVUE digital valve controllers for precise positioning feedback and condition-based maintenance diagnostics.

Key Features

The Fisher CV500 Cam Vee-Ball rotary globe control valve is built for demanding gas, liquid, steam, and slurry services where wide rangeability and tight shutoff both matter.

  • Cammed, segmented V-notched ball minimizes contact with the seat ring, reducing wear compared with continuous-contact valve designs.
  • Self-centering, self-lapping reversible metal seat ring provides two usable shutoff surfaces per ring.
  • Integral valve flanges eliminate exposed line flange bolting and shorten installation time.
  • Modified equal-percentage flow characteristic with roughly 200 to 1 flow coefficient rangeability supports precise control.
  • Class IV shutoff per ANSI/FCI 70-2 is achieved in either flow direction.
  • Field-reversible between push-down-to-close and push-down-to-open actuator configurations.
  • Sealed or purged bearing construction options protect the ball shaft in erosive or particulate-laden service.
  • Sour-service trim and bolting materials compliant with NACE MR0175-2002 extend the valve into oil and gas duty.

Industrial Applications

The Fisher CV500 is widely applied on gases, liquids, steam, and fibrous slurries across oil and gas production, petrochemical processing, refining, power generation, and pulp and paper operations, where its eccentric camming action tolerates entrained solids and viscous media that would quickly erode a continuous-contact seat design. Its wide flow rangeability also makes it a practical choice for pressure-reducing and pressure-control duty across general process plants that must handle wide swings in demand on a single valve.

Seven Star LLC supplies the CV500 Cam Vee-Ball rotary globe control valve throughout Oman and the broader GCC, supporting oil and gas, refining, and power generation projects in the Sohar and Salalah industrial and economic zones as well as facilities around Muscat, with manufacturer documentation and technical support available for this rugged Cam Vee-Ball rotary globe valve. Sultanate of Oman oil and gas operators and GCC petrochemical and power plants specify the CV500 wherever a wide-rangeability rotary valve must handle dirty, slurry, or high-turndown process conditions reliably.

Technical Specifications

The table below summarizes the principal Fisher CV500 specifications and control valve design data as published by the manufacturer.

Parameter Specification
Model Fisher CV500
Valve Type Rotary globe (Cam Vee-Ball: cammed, segmented V-notched ball) control valve
Body Style Flanged valve body, reversible metal seat ring, splined shaft
Size Range NPS 3 through 12 (DN 80 through 300)
Pressure Class CL150, CL300, CL600
Seat Ring Reversible S31600 stainless steel or R30006 Alloy 6, self-centering and self-lapping
Flow Characteristic Modified equal percentage, approximately 200:1 rangeability
Shutoff Class Class IV per ANSI/FCI 70-2, either flow direction
Sour Service Compliance NACE MR0175-2002 trim and bolting
Actuation Field-reversible Fisher rotary actuator with FIELDVUE compatibility
Typical Service Oil and gas, petrochemical, refining, power, and pulp and paper

Request a Quote for Fisher CV500 Cam Vee-Ball Rotary Globe Control Valve

Process, refining, and power generation engineers across Oman and the GCC can request a formal quotation for the Fisher CV500 Cam Vee-Ball rotary globe control valve directly from Seven Star LLC, including lead time, full technical datasheets, and seat ring material guidance for dirty, sour, or slurry service. Working closely with plant engineers in the region, Seven Star LLC’s instrumentation and valve automation division is ready to assist with CV500 sizing, actuator selection, and FIELDVUE digital valve controller integration, so contact our team today to specify a rugged, wide-rangeability Cam Vee-Ball rotary globe control valve for your project.

Browse the full Fisher range or see more Control Valves products supplied by Seven Star LLC in Oman and the GCC.

Datasheets & Documents
  • PDF Datasheet Fisher CV500 Product Bulletin Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Fisher is the control valve brand of Emerson. Its history starts in 1880 in Marshalltown, Iowa, where William Fisher, working at the town waterworks, invented a constant-pressure pump governor and founded a company to make it. Emerson bought Fisher Controls in 1992, and Marshalltown remains a main engineering and manufacturing site for Fisher valves. The brand covers control valves, actuators, FIELDVUE digital valve controllers, regulators and level controllers.

Seven Star LLC is an independent supplier listing Fisher control valves, actuators, positioners, regulators and spare parts for buyers in Oman and the GCC. Replacement valves and trim are matched from the serial number on the valve nameplate.

Fisher company profile

Origin William Fisher's constant-pressure pump governor, Marshalltown, Iowa, USA (1880)
Ownership Owned by Monsanto from 1969; sold to Emerson in 1992 and combined with Rosemount as Fisher-Rosemount, later Emerson Process Management. Today a brand of Emerson.
Main site Marshalltown, Iowa, USA
Product families Sliding-stem and rotary control valves, spring-diaphragm and piston actuators, FIELDVUE digital valve controllers, pressure regulators, displacer and digital level controllers
Typical duty Throttling control of liquids, gas and steam, high-pressure and severe service, instrument supply and gas pressure reduction

Milestones

  • 1880: William Fisher builds a constant-pressure pump governor in Marshalltown, Iowa.
  • 1969: Monsanto acquires Fisher Controls.
  • 1992: Emerson buys Fisher and combines it with Rosemount as Fisher-Rosemount, later Emerson Process Management.

Fisher valves, actuators and instruments

Series Type Typical use
easy-e ES, ET, EZ Sliding-stem globe and angle valves Cage-guided globe valves: ES with unbalanced plug, ET with balanced trim for higher pressure drop; EZ unbalanced with a seat ring retainer for viscous or dirty fluids
GX Compact globe valve with integral actuator Standard chemical and process duty where a compact valve package is preferred
HPT, HPAT High-pressure globe and angle valves Pressure classes up to ASME CL2500, compressor recycle and high-pressure letdown
V150, V200, V300, V250 Vee-Ball segmented ball and full-bore ball control valves High-capacity control of liquids, gas and fibrous or slurry service
CV500 Eccentric rotating plug valve Erosive, coking and dirty service
8560, 8580 High-performance butterfly valves Large-line throttling and on-off control
657, 667, 1052, 1061, easy-Drive Spring-diaphragm, piston and electric actuators 657 and 667 for sliding-stem valves; 1052 and 1061 for rotary valves; easy-Drive where no air is available
FIELDVUE DVC6200, DVC2000, 3610J Digital valve controllers and positioners HART positioning with valve diagnostics; 3610J pneumatic positioner for rotary actuators
627, 1098-EGR, 67C Pressure regulators Gas pressure reduction, pilot-operated regulation and instrument air supply
DLC3100, 2500 Digital and pneumatic level controllers Displacer level and interface on separators and scrubbers

Where Fisher valves are used

Fisher control valves and regulators are standard equipment in oil and gas production, refineries, gas processing and LNG, petrochemicals, power plants and water systems. Typical loops are separator level and pressure, compressor anti-surge and recycle, fuel gas pressure reduction, feedwater and steam control, and chemical dosing. FIELDVUE controllers add diagnostics that help plan valve maintenance before a turnaround.

Ordering Fisher valves and spare parts: what we need

For spares, send the serial number from the valve nameplate together with the valve type, size, pressure class, trim and actuator type and size. Emerson keeps the build record behind the serial number, so plug, seat ring, cage, packing and diaphragm kits can be matched without guesswork. For a FIELDVUE or regulator, send the full model and type number and the mounting details. For a new valve add the process data: fluid, flow range, inlet and outlet pressure, temperature, leakage class, fail position, air supply and signal.

Facts checked against Emerson Fisher product information and published company histories, October 2026.

FAQ

Questions about the Fisher CV500 Cam Vee-Ball Rotary Globe Control Valve

Answers from our engineering team on installation, compatibility and integration.

01How does the Fisher CV500 Cam Vee-Ball rotary globe design reduce seat wear?
The cammed, segmented V-notched ball cams in and out of contact with the seat ring only at closure rather than sliding across it continuously, which minimizes seat wear compared with a continuous-contact valve design.
02What size range and pressure classes does the Fisher CV500 cover?
The CV500 is available in NPS 3 through 12 (DN 80 through 300) in CL150, CL300, and CL600 pressure classes.
03What shutoff class does the CV500 achieve?
The CV500 achieves Class IV shutoff per ANSI/FCI 70-2 in either flow direction, using its self-centering, self-lapping reversible seat ring.
04Is the Fisher CV500 suitable for sour service applications?
Yes, trim and bolting materials compliant with NACE MR0175-2002 are available, extending the CV500 into sour oil and gas service.
05Is Seven Star LLC an experienced supply partner for Fisher products?
Yes, Seven Star LLC is an experienced supplier of Fisher control valves in Oman and the GCC, supplying Fisher control valves with technical support on request.