- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Bently Nevada
Bently Nevada 330500-02-00 Velomitor Piezo-velocity Sensor
Description
330500-02-00 in one paragraph
The Bently Nevada 330500-02-00 is a Velomitor piezo-velocity sensor in the 330500 family, supplied with an M8 x 1 mounting thread adapter and without agency approval. It measures bearing housing or casing vibration relative to free space, and because the electronics are built into a solid-state package it has no moving parts to wear. It is a common companion to proximity probes on fluid-film bearing machines and a stand-alone choice on rolling-element machines.
Exact option strings matter when older machines carry a specific adapter, so request 330500-02-00 by full number. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
330500-02-00 measured performance
| Sensitivity | 3.94 mV/mm/s (100 mV/in/s) plus or minus 5 percent |
|---|---|
| Frequency response | 4.5 Hz to 5 kHz plus or minus 3.0 dB; 6.0 Hz to 2.5 kHz plus or minus 0.9 dB |
| Velocity range | 1270 mm/s (50 in/s) peak |
| Amplitude linearity | Plus or minus 2 percent to 152 mm/s (6 in/s) peak |
| Temperature sensitivity | -14 percent to +7.5 percent typical |
| Transverse sensitivity | Less than 5 percent of sensitivity |
| Mounted resonance | Greater than 12 kHz |
| Output bias voltage | -12 plus or minus 3.0 Vdc referenced to pin A |
| Dynamic output impedance | Less than 2400 ohm |
| Broadband noise floor | 0.004 mm/s (160 microinch/s) rms nominal, 4.5 Hz to 5 kHz |
| Grounding | Case isolated |
Physical limits of 330500-02-00
- Weight 142 g (5.0 oz) typical; diameter 25.3 mm (0.995 in); height 63.2 mm (2.49 in)
- 316L stainless steel case; 2-pin MIL-C-5015 hermetically sealed connector
- Operating temperature -55 C to +121 C; shock survivability 5,000 g peak
- Humidity up to 100 percent non-submerged, case hermetically sealed
- Mounting torque 32 to 46 kg cm (24 to 40 in lb) maximum
- Base strain sensitivity 0.005 in/s per microstrain
- Magnetic field susceptibility below 51 microinch/s per gauss at 50 gauss, 50 to 60 Hz
How 330500-02-00 differs from other 330500 options and the 330400
The 330500-AA-BB string selects a mounting thread adapter (00 none, 01 1/2-20 UNF, 02 M8 x 1, 03 1/4-28 UNF, 04 1/4-20 UNC, 06 5/8-18 UNF, 07 3/8-16 UNC, 08 1/2-13 UNC) and an approval option (00 none, 01 CSA, 02 ATEX, 04 CSA and ATEX). This model is 02 and 00. The datasheet notes that 1/4-18 NPT mounting requires the 330525 instead.
Against the 330400 accelerometer, which gives an acceleration output of 100 mV/g and a 3-pin connector, the 330500-02-00 gives a velocity output at 100 mV/in/s on a 2-pin connector and runs on a two-wire loop with a -12 V output bias rather than a -8.5 V bias.
Where 330500-02-00 is used in the GCC
Casing and bearing-housing velocity is the classic trend variable for pumps, fans, motors and gearboxes in water, power and industrial plants. In oil and gas it is added to compressors and turbines to catch casing vibration that proximity probes miss. The Velomitor input is accepted by monitors such as the 3500/42M, which lists velocity sensitivities of 20, 5.8 or 4 mV per mm/s, and this 3.94 mV per mm/s (100 mV/in/s) sensor corresponds to the 100 mV/in/s entry in that list.
Installation guidance for 330500-02-00
Mount the sensor on the bearing housing or casing, never on a thin cover. Torque to the stated range and keep to the recommended cable length of 63 m (208 ft) when the machine could reach 50 g at 10 kHz and the cable capacitance is 200 pF per metre; for longer runs the datasheet advises contacting the manufacturer’s support. The standard maximum is 305 m (1,000 ft) of cable part number 02173006 with no degradation.
Do not integrate the Velomitor output to get displacement without care: the datasheet warns that amplified noise can degrade performance and give inaccurate displacement data.
Compliance and approvals for 330500-02-00
The datasheet lists EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, ABS marine, offshore and mobile offshore classifications, and ATEX standards EN 60079-0, -7, -11 and -15 for the approved variants. Intrinsically safe use requires connection to equipment that meets the listed entity parameters and cables that respect the stated cable parameters. This 00 variant was ordered with no agency approval, so for a hazardous area choose the 01, 02 or 04 approval option instead and quote it as its own part number.
Practical checks and spares for 330500-02-00
A failed Velomitor typically shows a bias voltage far from the -12 Vdc nominal output or no signal at all. Measure at the monitor input, then at the sensor connector, to separate cable faults from sensor faults. Keep a spare sensor and a length of the correct two-conductor twisted, shielded 22 AWG cable with a moisture-resistant two-socket connector. The sensor polarity matters: when the case moves toward the connector, pin A becomes positive with respect to pin B.
When ordering a replacement 330500-02-00, quote the thread adapter and approval digits together; the wrong adapter means re-machining the mounting hole or fitting an extra adapter plate.
Finally, document the scale factor in the monitor configuration. The datasheet gives 100 mV per inch per second, equal to 3.94 mV per mm/s, and the monitor channel must be set to the same value so that alarm setpoints are expressed in the engineering units your maintenance team uses. A wrong scale factor produces alarms that look plausible but are off by a fixed ratio, which is hard to spot after commissioning. Verify with a handheld vibration calibrator at the casing if one is available.
Documents and quotation
The manufacturer’s datasheet 141632 for 330500-02-00 is attached. To request a quotation, send Seven Star LLC the part number 330500-02-00, the quantity and any cable lengths through the RFQ form.
Delivery to Sites in Oman and the GCC
Delivery of the Bently Nevada 330500-02-00 is arranged to suit the site, whether that is a plant in Sohar or Duqm, an oilfield location in the interior, or a project elsewhere in the GCC. Tell us the delivery point, any site access or gate-pass requirements, and the person who will receive the goods. Goods are packed to protect sensitive vibration monitoring equipment during road or air transport, and shipping details are shared once the order is dispatched so that your stores team can plan receipt and inspection.
Datasheets & Documents
- Datasheet Bently Nevada 330500-02-00 Velomitor Piezo-velocity Sensor Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Bently Nevada is the American machinery protection and condition monitoring brand behind the 3500 rack, the 3300 XL proximity probe and the System 1 software. It was founded in 1961 in Minden, Nevada, and is today a Baker Hughes business.
Seven Star LLC is an independent supplier in Muscat. We list Bently Nevada monitors, I/O modules, probes, proximitors, velocity transducers and transmitters for rotating equipment in Oman and the GCC, and source them by full part number.
Bently Nevada company profile
| Established | 1961, Minden, Nevada, USA, by Donald E. Bently. The business started earlier as Bently Scientific in Berkeley, California (1956). |
|---|---|
| Known for | The first commercial eddy-current proximity transducers for measuring shaft vibration and position on high-speed turbomachinery |
| Ownership | Acquired by GE Energy in 2002; part of Baker Hughes since GE Oil & Gas combined with Baker Hughes in 2017 |
| Rack generations | 5000 series (from 1965), 3300 series (from 1988), 3500 series (from 1995), Orbit 60 (current platform) |
| Product families | Machinery protection racks, proximity probes and proximitors, Keyphasor sensors, velocity and acceleration transducers, 2-wire vibration transmitters, general-purpose monitors, portable analyzers, wireless sensors and System 1 condition monitoring software |
| Typical machines | Steam and gas turbines, centrifugal and reciprocating compressors, pumps, motors, generators, fans and gearboxes |
Milestones
- 1956: Donald E. Bently starts Bently Scientific in Berkeley, California.
- 1961: The company moves to Minden, Nevada, as Bently Nevada.
- 1965: The 5000 series monitoring system is introduced.
- 1988: The 3300 series follows.
- 1995: The 3500 machinery protection system is launched.
- 2002 and 2017: GE Energy acquires Bently Nevada; it becomes part of Baker Hughes in 2017.
Bently Nevada product series
| Series | Type | What it does |
|---|---|---|
| 3500 | Machinery protection rack | Continuous online protection with alarm and danger relays. Modules include the 3500/15 power supply, 3500/20 rack interface, 3500/25 Keyphasor, 3500/42M proximitor/seismic, 3500/50 tachometer, 3500/60 temperature, 3500/33 relay and 3500/92 communication gateway |
| 3500 recip modules | Reciprocating compressor monitoring | 3500/70M impulse velocity, 3500/72M rod position and 3500/77M cylinder pressure |
| Orbit 60 | Protection and monitoring platform | The current Bently Nevada platform for protection, condition monitoring and data integration with System 1 |
| 3300 XL 8 mm | Proximity transducer system | Probe, extension cable and proximitor sensor for radial vibration, thrust position and Keyphasor reference on fluid-film bearing machines; also 5 mm and 25 mm versions |
| 330500 Velomitor, 190501 Velomitor CT | Piezo-velocity sensors | Casing velocity on rolling-element bearing machines and low-speed cooling tower fans |
| 990 and 991 | 2-wire transmitters | 4-20 mA vibration (990) and thrust position (991) signals straight into a PLC or DCS, without a monitor rack |
| 1900/65A, 2300 | Compact monitors | Protection for balance-of-plant pumps, fans and motors where a full 3500 rack is not justified |
A proximity probe measures the gap to the shaft, so it sees shaft movement inside a fluid-film bearing directly. A velocity or acceleration sensor sits on the casing and suits rolling-element bearing machines. Critical turbomachinery usually carries two X-Y probes per bearing, two axial probes for thrust position and a Keyphasor probe for speed and phase.
Where Bently Nevada systems are used
In Oman and the GCC, Bently Nevada racks and probes protect gas turbines, compressors and steam turbines in gas processing, LNG, refining, petrochemical, power and desalination plants. Many installations are 3500 racks that have run for years, so most requests are for like-for-like module, probe, extension cable and proximitor replacements, plus upgrades to newer monitors.
Ordering and replacement: what we need
For probes and proximitors, send the full part number with all option digits (for example 330101-00-27-10-02-05). The digits set the probe length, cable length, connector and approvals, and the probe, cable and proximitor must match in total system length. For 3500 modules, send the module and I/O part numbers from the rack and say whether the I/O is internal or external termination, or barrier type. If a module is obsolete, we quote the replacement that Bently Nevada names and point out any configuration or firmware change.
Frequently requested Bently Nevada models: Bently Nevada 3300 XL 8mm Proximity Probe, Bently Nevada 125680-01 3500/40M Proximitor I/O Module, Bently Nevada 149369-01 3500/25 Enhanced Keyphasor Module, Bently Nevada 126648-02 Isolated Keyphasor I/O Module, External, Bently Nevada 3500/61 Temperature Monitor with Recorder Outputs, Bently Nevada 3500/50M Tachometer Module.
Facts checked against Baker Hughes Bently Nevada pages and published company history, October 2026.
Browse Bently Nevada products by category: Vibration.
Planning a 3500 rack upgrade or a module replacement? Our Bently Nevada 3500 modules guide explains what each monitor, relay and communication module does, and the 3500 module replacement checklist lists the details to confirm before you order.
FAQ
Questions about the Bently Nevada 330500-02-00 Velomitor Piezo-velocity
Answers from our engineering team on installation, compatibility and integration.
01What is a Velomitor sensor?
The datasheet describes it as a piezo-velocity sensor, a specialised piezoelectric accelerometer with embedded integrated electronics, used to measure absolute bearing housing, casing or structural vibration.
02What does -02-00 mean in 330500-02-00?
The first option 02 is an M8 x 1 mounting thread adapter and the second option 00 means no agency approval is required.
03What is the sensitivity of the 330500?
3.94 mV/mm/s (100 mV/in/s) plus or minus 5 percent, with a velocity range of 1270 mm/s (50 in/s) peak.
04Can the sensor be mounted at any angle?
Yes. Because it has solid-state electronics and no moving parts, it can be mounted vertically, horizontally or at any other orientation.
05What should be in an RFQ for 330500-02-00?
Provide the part number 330500-02-00, quantity, and the cable part number and length if you also want an interconnect cable.


















Reviews
There are no reviews yet.