- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Beamex
Beamex 8066660 Battery Pack MC5, NiMH RB72-40
Description
Overview of Beamex MC5 NiMH battery pack RB72-40 Beamex 8066660
The Beamex 8066660 is the rechargeable nickel metal hydride battery pack type RB72-40 for the MC5 calibrator, with a capacity of 4000 mAh at 7.2 V.
Spare packs for ageing calibrators are exactly the type of item that becomes hard to find, so confirm stock before a shutdown.
This page describes Beamex MC5 NiMH battery pack RB72-40 for buyers who need the exact part number Beamex 8066660. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.
Key features of 8066660
- Order code: 8066660.
- Battery chemistry: Rechargeable NiMH.
- Pack type: RB72-40.
- Capacity: 4000 mAh.
- Voltage: 7.2 V.
- Fits: MC5 calibrator.
- Availability note: The manufacturer states estimated availability until the end of Q3/2026.
Technical specifications for 8066660
| Order code | 8066660 |
|---|---|
| Battery chemistry | Rechargeable NiMH |
| Pack type | RB72-40 |
| Capacity | 4000 mAh |
| Voltage | 7.2 V |
| Fits | MC5 calibrator |
| Availability note | The manufacturer states estimated availability until the end of Q3/2026 |
All values above come from the manufacturer documentation and may change with later revisions. Please quote 8066660 when you need the matching datasheet or a confirmation of the current revision.
Typical applications in Oman and the GCC
Battery packs are the part of a portable calibrator that ages first. Plants in Oman and the GCC that run calibrators daily for turnarounds, shutdown checks and routine rounds see capacity fall after repeated charge cycles, and a fresh pack restores full working time between charges.
Maintenance contractors working on oil and gas sites, utilities, desalination and manufacturing lines keep spare packs in the kit so that a flat battery never stops a loop check or a documentation run.
The part is relevant wherever the related calibration equipment is used: oil and gas, utilities, water, process manufacturing and calibration service providers in Oman and the wider GCC.
Equipment used in Oman and the wider GCC faces high ambient temperatures, dust and coastal humidity. Keep instruments and accessories out of direct sun, avoid leaving them in closed vehicles, and allow cold equipment to acclimatise before use when moving from an air-conditioned room to an outdoor unit. Cap connectors and threads when they are not in use so that sand and moisture stay out.
Selection and compatibility notes for 8066660
The charger for the MC5 is the BC12 power supply (8066780), and a US power cord is listed as 6676270. The manufacturer webshop notes limited remaining availability for this pack, so users of MC5 calibrators should plan replacements early.
Because the product is approaching the end of its availability window, early enquiry is recommended.
Before ordering 8066660, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.
If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 8066660 before it is supplied.
Installation and commissioning of 8066660
Switch the calibrator off and disconnect the charger and all test leads before opening the battery compartment. Follow the replacement procedure in the calibrator user manual, keep the connector orientation exactly as found, and refit the cover before switching on. After fitting 8066660, charge the pack fully with the matching charger before relying on it in the field.
Reset the date and time if the calibrator asks for it, and confirm that the battery indicator reads correctly. Dispose of the old pack through a battery recycling channel in line with local regulations.
Maintenance and care
Store spare battery packs partly charged in a cool, dry place and charge them before use. Avoid leaving a pack discharged for a long time, and do not charge outside the temperature limits given in the calibrator specification. Replace the pack when operating time becomes noticeably shorter than expected.
Use only the matching charger listed for the calibrator, and keep the contacts clean. Record the installation date of 8066660 so that replacement can be planned.
Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.
Related products and ordering notes for 8066660
Related items include the matching power supply and power cord, a protective case and spare test leads. The calibrator brochure and the manufacturer webshop list each accessory by part number.
Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.
Please note that Seven Star LLC prepares each quotation for 8066660 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.
The part number 8066660 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.
Frequently asked questions about 8066660
- Which calibrator uses 8066660? The MC5 calibrator, with battery pack type RB72-40.
- What is the capacity? 4000 mAh at 7.2 V, according to the manufacturer documentation for 8066660.
- Is the part being phased out? The manufacturer webshop shows an estimated availability until the end of Q3/2026.
- Which charger do I need? The BC12 power supply for MC5, code 8066780, plus a power cord.
- Is it the same as the MC6 battery? No. The MC6 uses a lithium-ion pack, 8081785.
Documents and quotation
The official Beamex MC5 User Guide is attached to this page as a PDF. Its sections on the battery pack and charger explain how the battery of the MC5 is charged, replaced and maintained. Send us the order code 8066660 and the serial number of your instrument and we will confirm fit and lead time in a written quotation.
Datasheets & Documents
- Datasheet Beamex MC5 User Guide (official PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.
Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.
Beamex company profile
| Origin | Founded in 1975 in Finland by four calibration technicians; first factory 1977 |
|---|---|
| Headquarters | Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992 |
| Product families | MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software |
| Typical duty | Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters |
Milestones
- 1975: Four calibration technicians found the company in Finland.
- 1977: The first factory opens.
- 1992: ISO 9001 certification.
Beamex calibrators and accessories
| Model | Type | Typical use |
|---|---|---|
| MC6 | Advanced field calibrator and communicator | Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results |
| MC6-Ex | Intrinsically safe field calibrator | Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit |
| MC6-T | Temperature calibrator with integrated dry block | Temperature sensors and transmitters, with multifunction electrical and pressure measurement |
| MC4, MC2 | Documenting and hand-held process calibrators | Routine loop, transmitter and switch checks in the field |
| FB, MB | Field and metrology temperature dry blocks | FB for field calibration; MB for higher-accuracy workshop and laboratory work |
| ePG, POC8 | Electric pressure pump and automatic pressure controller | Automated pressure calibration; POC8 for workshop calibration benches |
| PGC, PGM, PGL, PGPH, PGHH | Hand pressure pumps | Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH) |
| EXT modules | External pressure modules | Extending MC calibrators to additional ranges, 70 kPa to 100 MPa |
Where Beamex equipment is used
Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.
Ordering Beamex equipment: what we need
State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.
Facts checked against Beamex company history and product information, October 2026.
Browse Beamex products by category: Portable Test & Measurement, Temperature Instrumentation.
FAQ
Questions about the Beamex 8066660 Battery Pack MC5, NiMH RB72-40
Answers from our engineering team on installation, compatibility and integration.
01Which calibrator uses 8066660?
The MC5 calibrator, with battery pack type RB72-40.
02What is the capacity?
4000 mAh at 7.2 V, according to the manufacturer documentation for 8066660.
03Is the part being phased out?
The manufacturer webshop shows an estimated availability until the end of Q3/2026.
04Which charger do I need?
The BC12 power supply for MC5, code 8066780, plus a power cord.
05Is it the same as the MC6 battery?
No. The MC6 uses a lithium-ion pack, 8081785.


















Reviews
There are no reviews yet.