- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Beamex
Beamex 9270000 MC6 Advanced Field Calibrator and Communicator
Description
Overview of Beamex MC6 advanced field calibrator and communicator Beamex 9270000
The Beamex MC6 (product code Beamex 9270000) is a high-accuracy portable calibrator that covers pressure, temperature and a wide range of electrical signals in a single housing. It also works as a multi-bus field communicator for HART, FOUNDATION Fieldbus and Profibus PA instruments, so a technician can calibrate, configure and trim a smart transmitter without carrying separate tools.
The manufacturer positions the unit for industries such as pharmaceutical, energy, oil and gas, food and beverage, service, petrochemical and chemical. A 5.7 inch colour touch screen, a membrane keypad and an IP65 dust and water resistant case make Beamex 9270000 practical on a plant walk-down as well as in a workshop. Each unit leaves the factory with an accredited calibration certificate, and the MC6 can exchange data with Beamex CMX and LOGiCAL calibration management software, including wirelessly over Bluetooth.
This page describes Beamex MC6 advanced field calibrator and communicator for buyers who need the exact part number 9270000. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.
Key features of 9270000
- Five user interface modes in one unit: Meter, Calibrator, Data Logger, Documenting Calibrator and Communicator, plus a Settings view.
- Pressure accuracy starting from plus or minus (0.005 percent of full scale plus 0.0125 percent of reading), per the manufacturer brochure.
- RTD measurement accuracy starting from plus or minus 0.011 degrees C, and current measurement accuracy starting from plus or minus (0.75 microamp plus 0.0075 percent of reading).
- Multi-bus communicator options for HART, FOUNDATION Fieldbus and Profibus PA instruments; all three options can be installed in the same unit.
- Rechargeable lithium-ion battery with 10 to 16 hours of operating time and a battery indicator that shows remaining time in hours and minutes.
- Documented calibration workflow with automatic point setting and result storage, designed to work together with calibration management software.
Technical specifications for 9270000
| Product code | 9270000 |
|---|---|
| Display | 5.7 inch diagonal, 640 x 480 TFT LCD, adjustable LED backlight |
| Input | 5-wire resistive touch screen and membrane keyboard |
| Weight | 1.5 to 2.0 kg (3.3 to 4.4 lb) |
| Dimensions (D x W x H) | 200 x 230 x 70 mm |
| Battery | Rechargeable lithium-ion, 4300 mAh, 11.1 V |
| Charging time | Approximately 4 hours |
| Charger supply | 100 to 240 VAC, 50 to 60 Hz |
| Battery operation time | 10 to 16 hours |
| Operating temperature | -10 to 45 degrees C (0 to 30 degrees C while charging) |
| Storage temperature | -20 to 60 degrees C |
| Operating humidity | 0 to 80 percent RH, non-condensing |
| Maximum input voltage | 30 V AC, 60 V DC |
| Ingress protection | IP65 |
| Drop test | 1 m, IEC 60068-2-32 |
| Vibration | IEC 60068-2-64, random, 2 g, 5 to 500 Hz |
| Computer interface | USB and Bluetooth |
| Maximum altitude | 3000 m (9842 ft) |
| Warranty | 3 years; 1 year for the battery pack |
All values above come from the manufacturer documentation and may change with later revisions. Please quote 9270000 when you need the matching datasheet or a confirmation of the current revision.
Standard delivery as stated by the manufacturer:
- USB Type-A to Type-B communication cable (8036700)
- Battery charger with power supply BC15 (8081755) and a country-specific power cord
- Li-ion battery pack MC6 (8081785), installed
- Three banana-to-banana test leads (8066800), one pincer clip set (8066810), two alligator clip sets (8066811) and one thermocouple-to-banana lead (8036820)
Typical applications in Oman and the GCC
In oil and gas facilities across Oman, technicians use a field calibrator like 9270000 to verify pressure transmitters, temperature transmitters and 4 to 20 mA loops during turnarounds and routine rounds. The communicator function lets them trim HART devices on the same visit.
Power and water utilities in the GCC use the documenting mode to build an auditable calibration history, while manufacturing and food plants value the IP65 case and the fast start-up time.
Typical sectors are oil and gas production and processing, refining and petrochemicals, power generation, desalination and water treatment, pharmaceutical and food manufacturing, and calibration service providers across Oman, the UAE, Saudi Arabia, Qatar, Kuwait and Bahrain.
Selection and compatibility notes for 9270000
The base unit is a configurable product. Communicator options for HART, FOUNDATION Fieldbus and Profibus PA, the Data Logger interface mode, controller communication options and wireless communication are software or hardware options that expand the calibrator. The manufacturer notes that hardware options can only be installed at its facility or through its approved service channel, so decide the option set before ordering.
Pressure work is done with internal or external pressure modules and a pressure source such as a calibration pump, together with hoses and fittings. Temperature calibration of sensors in a dry block is handled well with the MC6-T, while 9270000 itself measures and simulates RTD and thermocouple signals. For hazardous areas use the intrinsically safe MC6-Ex instead, because this model is not certified for Ex zones.
Before ordering 9270000, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.
If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 9270000 before it is supplied.
Installation and commissioning of 9270000
Unpack 9270000 and check the delivery against the standard accessories list before taking it to site. Charge the battery fully before the first job, confirm the date, time and language in the Settings view, and read the user manual for your firmware version. Connect test leads or pressure hoses only when the unit is idle, and always check the connection diagram shown on the screen for the selected function.
For pressure work attach the pressure module, a hose set suited to the pressure range and the right fittings, and vent the system slowly. For loop work use the built-in loop supply and keep the maximum input voltage of the calibrator in mind. After commissioning, run a short verification against a known reference so the first documented result is trustworthy.
Maintenance and care
Keep the calibrator clean and dry, store it in its case and avoid leaving it in a hot vehicle. Check the condition of test leads, clips and pressure hoses before each campaign, because worn accessories are the most common cause of unstable readings. Follow the recalibration interval set by your quality system, and use the accredited certificate delivered with 9270000 as the starting point for the history.
Update firmware and device description files only from the manufacturer download area, and record the version in your calibration log. If a part such as a battery, charger, case or fuse needs replacing, order the exact spare part number rather than a lookalike.
Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.
Related products and ordering notes for 9270000
Typical companions for 9270000 are a protective case, a spare battery pack, pressure hoses and fittings, reference temperature sensors and calibration management software. Many of these are separate part numbers, so list them in the same enquiry to receive one consolidated reply.
Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.
Please note that Seven Star LLC prepares each quotation for 9270000 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.
The part number 9270000 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.
Frequently asked questions about 9270000
- What is Beamex MC6 9270000 used for? It is a portable multifunction calibrator and fieldbus communicator for pressure, temperature and electrical signals, used to calibrate and document the performance of process instruments in the field or the workshop.
- Is the MC6 suitable for hazardous areas? No. The standard MC6 is not an intrinsically safe unit. For explosive atmospheres the manufacturer offers the separate MC6-Ex, which carries ATEX, IECEx and North American certification.
- Which communicator protocols can be added? HART, FOUNDATION Fieldbus and Profibus PA communicator options are available and all three can be installed in one unit, according to the manufacturer.
- How long does the battery last? The lithium-ion pack gives 10 to 16 hours of operation according to the brochure, and a full charge takes about 4 hours with the supplied charger.
- Does it ship with a calibration certificate? Yes. The manufacturer states that every unit is delivered with a traceable, accredited calibration certificate as standard.
Documents and quotation
The manufacturer brochure for this product family is available as a datasheet document on this page. To request a quotation, send the RFQ to Seven Star LLC with the part number 9270000, the quantity required, the delivery location and any related items. We will confirm availability and lead time for 9270000 and reply with commercial terms.
Datasheets & Documents
- Datasheet Beamex 9270000 MC6 Advanced Field Calibrator and Communicato Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.
Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.
Beamex company profile
| Origin | Founded in 1975 in Finland by four calibration technicians; first factory 1977 |
|---|---|
| Headquarters | Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992 |
| Product families | MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software |
| Typical duty | Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters |
Milestones
- 1975: Four calibration technicians found the company in Finland.
- 1977: The first factory opens.
- 1992: ISO 9001 certification.
Beamex calibrators and accessories
| Model | Type | Typical use |
|---|---|---|
| MC6 | Advanced field calibrator and communicator | Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results |
| MC6-Ex | Intrinsically safe field calibrator | Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit |
| MC6-T | Temperature calibrator with integrated dry block | Temperature sensors and transmitters, with multifunction electrical and pressure measurement |
| MC4, MC2 | Documenting and hand-held process calibrators | Routine loop, transmitter and switch checks in the field |
| FB, MB | Field and metrology temperature dry blocks | FB for field calibration; MB for higher-accuracy workshop and laboratory work |
| ePG, POC8 | Electric pressure pump and automatic pressure controller | Automated pressure calibration; POC8 for workshop calibration benches |
| PGC, PGM, PGL, PGPH, PGHH | Hand pressure pumps | Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH) |
| EXT modules | External pressure modules | Extending MC calibrators to additional ranges, 70 kPa to 100 MPa |
Where Beamex equipment is used
Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.
Ordering Beamex equipment: what we need
State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.
Facts checked against Beamex company history and product information, October 2026.
Browse Beamex products by category: Portable Test & Measurement, Temperature Instrumentation.
FAQ
Questions about the Beamex 9270000 MC6 Advanced Field Calibrator and
Answers from our engineering team on installation, compatibility and integration.
01What is Beamex MC6 9270000 used for?
It is a portable multifunction calibrator and fieldbus communicator for pressure, temperature and electrical signals, used to calibrate and document the performance of process instruments in the field or the workshop.
02Is the MC6 suitable for hazardous areas?
No. The standard MC6 is not an intrinsically safe unit. For explosive atmospheres the manufacturer offers the separate MC6-Ex, which carries ATEX, IECEx and North American certification.
03Which communicator protocols can be added?
HART, FOUNDATION Fieldbus and Profibus PA communicator options are available and all three can be installed in one unit, according to the manufacturer.
04How long does the battery last?
The lithium-ion pack gives 10 to 16 hours of operation according to the brochure, and a full charge takes about 4 hours with the supplied charger.
05Does it ship with a calibration certificate?
Yes. The manufacturer states that every unit is delivered with a traceable, accredited calibration certificate as standard.


















Reviews
There are no reviews yet.