Brand:

Masoneilan 720083049-999-0000 SVI3 Pneumatic Module Kit Low Temp

Description

Masoneilan 720083049-999-0000 overview

The Masoneilan SVI3 is a HART 7 digital valve positioner for pneumatic control valves. It is loop powered from the 4 to 20 mA control signal, uses non-contact Hall effect position sensing for rotary and reciprocating valves, and is designed with a modular concept in which most sub-assemblies are interchangeable. The manual states that the housing is rated IP66 and NEMA 4x, is available in copper-free aluminum (per API RP 14F) or 316L stainless steel, and carries ATEX, IEC, USA and Canada hazardous-area approvals, with others on request.

The Masoneilan 720083049-999-0000 is the SVI3 Pneumatic Module Spare Part Kit for low (arctic) temperature construction, associated with the extreme temperature version rated -55 to 85 C. The pneumatic module is the part of the positioner that turns the electrical set point into actuator air pressure. The manual says it consists of the I/P converter, the pneumatic relay and the pneumatic electronics board, and that the board carries the pressure sensors and acts as a pass-through for the display module.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list the Masoneilan 720083049-999-0000 so that maintenance teams and purchasing departments can search by the exact part number printed in the manufacturer manual and request a quotation without a long identification exchange.

What the 720083049-999-0000 kit does in the SVI3

In operation the SVI3 compares the 4 to 20 mA position set point with the Hall effect position feedback, runs its position control algorithm, and sends a servo signal to the I/P converter. The relay then amplifies that pressure and the airflow to drive the actuator. Five pressure sensors on the pneumatic electronics board measure ambient, pilot, supply, actuator 1 and, on double acting positioners, actuator 2 pressure. When a failure points to the pneumatics, the manual tells the technician to replace the pneumatics module with a known good one, which is exactly the job of the 720083049-999-0000 kit.

Key features and benefits of the 720083049-999-0000

  • Replaces the complete pneumatic module: I/P converter, pneumatic relay and pneumatic electronics.
  • Pressure sensing for ambient, pilot, supply and actuator pressure on the module board.
  • Single acting relay works from a supply at least 5 psi above the required actuator pressure, up to 120 psi.
  • Modular design lets the module be swapped without removing the positioner from the valve.
  • Relay and manifold use composite polymers and 300 series stainless steel.
  • Fluorosilicone diaphragms for the extreme temperature version (-55 to 85 C).

Technical specifications for 720083049-999-0000

Parameter Value
Manufacturer Baker Hughes, Masoneilan brand
Part number 720083049-999-0000
Kit description SVI3 Pneumatic Module Spare Part Kit, Low Temperature
Module contents per manual I/P converter, pneumatic relay, pneumatic electronics
Pressure sensors Five: ambient, pilot, supply, actuator 1, actuator 2 (double acting)
Single acting relay supply limit At least 5 psi above actuator pressure, up to 120 psi (8.3 bar)
Relay diaphragm material Fluorosilicone (extreme temperature, -55 to 85 C)
Pneumatic connections Two 1/4 inch NPT ports

Values come from the manufacturer installation and maintenance manual and fact sheet. Specifications are subject to change without notice, so confirm the revision of the documents against the nameplate of your positioner before you order.

Typical applications in oil and gas, utilities, water and manufacturing

Digital positioners are fitted to control valves in refineries, gas processing plants, compressor stations, power and utility boilers, desalination and water treatment plants, and general manufacturing across Oman and the Gulf. In these services a positioner that is out of service usually means a valve that cannot be controlled from the DCS, so a ready spare is cheaper than a shutdown. The 720083049-999-0000 serves exactly this need for plants that run the SVI3 on their control valves.

The Gulf climate adds its own demands: high ambient temperatures, dust, salt-laden air on the coast and sun exposure on outdoor skids. The positioner housing is built for outdoor and corrosive industrial service, and keeping the right module on the shelf lets a maintenance crew return a valve to automatic control within the same shift.

Selection and compatibility notes

Confirm three things before ordering the 720083049-999-0000: the temperature version of the positioner, whether it is a standard or marine construction, and whether the unit is single acting. The manual describes the single acting relay; do not assume a kit for a single acting relay suits a double acting unit.

The supply must be clean, dry, oil-free instrument air or a sweet natural gas supply as the manual specifies, with a dew point at least 18 F (-7 C) below the lowest expected ambient temperature. Contaminated air is the most common reason a pneumatic module needs replacement, so correct the supply at the same time.

Always quote the complete number 720083049-999-0000 including the -999-0000 suffix when you send a request. Similar looking numbers in the same table identify different construction, temperature or diagnostic variants, and one wrong digit means a part that does not fit your positioner.

Installation and commissioning of the 720083049-999-0000

Follow the instruction sheet supplied with the 720083049-999-0000 kit. Isolate the valve from the process, disconnect air fully to avoid injury, and do not use pipe thread sealant tape on pneumatic fittings, because the manual warns it may shred into particles that cause malfunction.

After replacement run the setup again with SmartCal or ValVue: find stops, then Auto Tune. The manual describes Auto Tune as optimized for 5 percent step changes with negligible overshoot, and the aggressiveness level can then be adjusted from -9 to +9 if a slower or faster response is wanted.

The manual states that only qualified service personnel may make repairs, that only parts supplied by the factory are permitted, including mounting screws and O-rings, and that substitution of components can void safety approvals.

Maintenance and troubleshooting

Drain filters and regulators in the supply line regularly and check that tubing is clean and free from sealant residue. Review the positioner diagnostics for supply pressure trends, I/P pressure and actuator pressure, which help to show relay or I/P degradation before the valve misbehaves.

Related kits, ordering notes and FAQ summary

The 720083049-999-0000 is one of several SVI3 spare part kits listed in the manufacturer manual, which also covers modules for the pneumatics, the electronics, the display and the covers. When you plan a spares package for a plant, review the full kit table against the positioners installed, and send us the complete list so we can quote the numbers together. We also supply other Masoneilan control valve and regulator parts on request.

Typical questions from buyers cover what the kit replaces, how it differs from neighbouring kits, which positioner it fits and how to order it. The answers below summarise the points above for quick reference. For a positioner with a faded nameplate, send us a photo and the valve tag, and we will help you match the 720083049-999-0000 to the right unit.

Documents and quotation

A manufacturer datasheet for the SVI3 is available to download from this page. To receive a quotation for the 720083049-999-0000, send an RFQ to Seven Star LLC stating the part number, the quantity, the positioner model or serial number and the delivery location in Oman or the GCC. Our team will confirm availability and lead time promptly.

Other Models in the Svi3 Kit Range

Seven Star LLC supplies models from the Svi3 Kit range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Masoneilan 720085945-999-0000 SVI3 Conduit Entry Plug KitValve PositionersView details
Masoneilan 720085946-999-0000 SVI3 Threaded End Cover KitValve PositionersView details
Masoneilan 720083046-999-0000 SVI3 Option Module Kit StdValve PositionersView details
Masoneilan 720083047-999-0000 SVI3 Option Module Kit Low TempValve PositionersView details
Masoneilan 720083048-999-0000 SVI3 Pneumatic Module Kit StdValve PositionersView details
Masoneilan 720083049-999-0000 SVI3 Pneumatic Module Kit Low TempValve PositionersYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Masoneilan 720083049-999-0000 SVI3 Pneumatic Module Kit Low Temp Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Masoneilan is a control valve brand of Baker Hughes with roots going back to 1882. Its Camflex eccentric plug rotary valve, 21000 series globe valve and SVI digital positioners are fixtures in refineries, gas plants and power stations. Every valve carries a serial number and a long model number that define the actuator, body and trim.

Seven Star LLC is an independent supplier listing Masoneilan control valves, actuators, regulators, positioners and level instruments for buyers in Oman and the GCC. We source complete valves as well as Masoneilan spare parts against that nameplate data.

Masoneilan at a glance

Origin Mason Regulator Company, Boston area, USA (1882). It acquired the Neilan Company of California in 1931, and the two names became Masoneilan.
Ownership Dresser Industries from 1985, then GE Oil & Gas, now Baker Hughes
Milestones the company cites Cv flow coefficient introduced (1944), spring-diaphragm actuators (1955), Camflex rotary globe valve (1968), Lo-dB low-noise trim (1975), LincolnLog axial-flow letdown valve (1982), Varipak (1984), V-Log (1998), SteamForm steam conditioning valve (2002)
Product families Globe, rotary, butterfly and severe-service control valves, actuators, digital positioners, self-operated regulators and displacer level instruments
Typical duty Throttling control of steam, gas, hydrocarbons and water, high-pressure letdown, anti-cavitation and low-noise service

Masoneilan control valves and actuator series

Series Type Typical use
21000, 21009 Top-guided and cage-guided globe valves General process control. Cryogenic (21000 C), bellows seal (21000 BS) and API 6A versions are also made
41005 Cage-guided globe valve Higher pressure drop and larger sizes, up to 30-36 inch extended sizes; VRT anti-cavitation and API 6A versions
35002 Camflex II Eccentric plug rotary control valve Erosive, flashing and dirty service; HC high capacity, DVD low noise and GR globe replacement versions
37002 MiniTork II, 39003/39005, 33000 Butterfly control valves, high-performance and triple-offset Large flows at low pressure drop, and tight-shutoff duty
28000 Varipak Microflow control valve Very small flows, with adjustable Cv
78400/18400 LincolnLog, 77000, 49000 V-Log Severe-service multi-stage valves High-pressure liquid letdown, anti-cavitation and gas noise reduction
84000/84003 SteamForm, DSH Steam conditioning valves and desuperheaters Turbine bypass and steam pressure and temperature reduction
87/88, 37/38, 51/52/53 Spring-diaphragm and piston actuators Linear and rotary valve actuation; diaphragms and soft-goods kits are listed separately
SVI3, SVI II AP, SVi1000, SVI FF Digital valve positioners HART or FOUNDATION Fieldbus positioning with valve diagnostics; the SVI II ESD adds partial stroke testing
4700/4800, 8013 Pneumatic and electro-pneumatic positioners Older installed base. Many sites move to SVI positioners at overhaul
525/526, 535/536, 171-174 Self-operated pressure regulators Pressure reducing and back-pressure control without external power
12400, 12800 Displacer level transmitters and controllers Digital (12400, HART, SIL 2 version 12420) and pneumatic (12800) level control on separators and vessels

Where Masoneilan valves are used

Throttling duty on steam, hydrocarbons, gas and water is the daily work of these valves. Typical services are feedwater and steam conditioning in power plants, separator and compressor loops in gas processing, high-pressure-drop letdown, cryogenic service in LNG and air separation, and general flow, pressure and level control in refineries and chemical plants.

Ordering Masoneilan valves and spare parts: what we need

For spare parts the serial number decides the order, because the factory record behind it lists the trim, materials and actuator. Send a clear nameplate photo with the serial number, model number, size and pressure class. For a new valve, add the process data: fluid, inlet and outlet pressure, temperature, minimum, normal and maximum flow, required leakage class, fail position, air supply and control signal. When an older positioner or valve series is no longer made, we quote the successor that Baker Hughes names and list the mounting kit it needs.

Frequently requested Masoneilan models: Masoneilan 4700E/4800E Electropneumatic Valve Positioner, Masoneilan 28000 Series VariPak Valve Seal & O-Ring Kit, Masoneilan 535H Single-Seat Pressure Reducing Regulator.

Facts checked against Baker Hughes Masoneilan product information and the company's published timeline, October 2026.

FAQ

Questions about the Masoneilan 720083049-999-0000 SVI3 Pneumatic Module

Answers from our engineering team on installation, compatibility and integration.

01What does the Masoneilan 720083049-999-0000 replace?
It replaces the SVI3 pneumatic module, which the manual describes as the I/P converter, the pneumatic relay and the pneumatic electronics board with its pressure sensors.
02What is the difference between the standard and low temperature pneumatic kits?
The standard kit suits the -40 to 85 C version with nitrile diaphragms, while the low temperature kit suits the -55 to 85 C extreme temperature version with fluorosilicone diaphragms.
03When does the manual recommend replacing the pneumatic module?
In the fault tables the manual says to replace the pneumatics module with a known good one when diagnostics point to a pneumatic, I/P or pressure sensor failure.
04What supply does the SVI3 pneumatic relay need?
The single acting relay works on any supply at least 5 psi above the required actuator pressure and up to 120 psi, with clean, dry, oil-free instrument air or sweet natural gas.
05How do I order the 720083049-999-0000 from Oman?
Send an RFQ to Seven Star LLC with the part number, quantity and the positioner temperature version and construction. We are an independent supplier serving Oman and the GCC.