Brand:

ifm SV4200 Vortex Flow Meter with Display, G 1/2, 1-20 l/min

Description

ifm SV4200 Vortex Flow Meter with Display, G 1/2, 1-20 l/min

The ifm SV4200 is a vortex flow meter with display that measures flow and medium temperature in water, glycol solutions and coolants. The measuring range is 1 to 20 l/min (0.06 to 1.2 m³/h) with a resolution of 0.1 l/min, the thread is G 1/2 internal (DN8) and the pressure rating is 12 bar. The medium temperature is -10 to 90 degrees Celsius.

Outputs are selectable between switching, frequency and IO-Link; the supply is 18 to 30 V DC at less than 30 mA. Accuracy is plus or minus 2 percent of the final value, repeatability 0.5 percent, and protection IP65 and IP67. Seven Star LLC supplies the ifm SV4200 in Oman and the GCC as an independent supplier in Muscat.

SV4200 technical specifications

The table lists the values published by the manufacturer for the SV4200. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / SV4200
Measuring range 1 to 20 l/min / 0.06 to 1.2 m³/h
Resolution 0.1 l/min: 0.005 m³/h
Process connection threaded connection G 1/2 internal thread DN8
Dimensions [mm] 110 x 45 x 72
Media water; glycol solutions; coolants
Medium temperature [°C] -10 to 90
Pressure rating 12 bar / 1.2 MPa
Operating voltage [V] 18 to 30 DC
Current consumption [mA] < 30
Output signal switching signal; frequency signal; IO-Link (configurable)
Electrical design PNP/NPN
Output function normally open / normally closed (parameterisable)
Permanent current rating of switching output DC [mA] 100
Accuracy (in the measuring range) ± 2 % MEW (water)
Accuracy [K] ± 1
Repeatability ± 0.5 % MEW
Response time [s] 1 (dAP = 0)
Communication interface IO-Link
Ambient temperature [°C] 0 to 60
Protection IP 65; IP 67
Weight [g] 474
Materials stainless steel (316L/1.4404); PC; PBT+PC-GF30; PPS; TPE-U
Materials (wetted parts) stainless steel (316L/1.4404); ETFE; PA 6T; PPS; FKM
Connector 1 x M12; coding: A; Contacts: 4, gold-plated
MTTF [years] 342

How the SV4200 works

The SV4200 is a vortex flow meter. A bluff body in the measuring tube sheds vortices at a frequency proportional to the flow velocity, and the electronics count that frequency and convert it into volume flow. It also senses the medium temperature, so the display can show flow and temperature. Vortex measurement has no moving parts, but it needs a minimum flow to start shedding, which is why the measuring range begins at 1 l/min rather than zero. The reading is stated as accurate to plus or minus 2 percent of the final value for water. The colour display changes between red and green to show if the value lies inside the set limits.

Where the SV4200 fits and related parts

The SV4200 handles water and coolants with a vortex principle; the SM6004 and SM8000 in our range use magnetic-inductive measurement, which requires conductive liquids. The SI5000 monitors the presence of flow rather than its value.

Selection and ordering checklist for the SV4200

Work through the points below before you confirm the order, so that the SV4200 you receive is the one your machine or plant needs.

  • Check that the flow range of 1 to 20 l/min covers the application
  • Check the media: water, glycol solutions and coolants
  • Confirm G 1/2 internal thread and pressure up to 12 bar
  • Choose the output type
  • Check ambient 0 to 60 degrees Celsius

The manufacturer lists this article under the type designation Vortex flow meter with display, SVR12XXXIRKG/US-100. The article number SV4200 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Install the meter in the line so that it is always full, with the arrow pointing along the flow direction. Allow straight inlet and outlet runs of pipe as specified in the manufacturer documentation, and fit a strainer upstream when the medium may contain particles. Rotate the display to the most readable position, set the units, the switch points and the output mode, and compare the reading with a reference at a known flow if accuracy is critical.

Typical applications in Oman and the GCC

Cooling circuits for machine tools, laser and welding equipment, chillers and heat exchangers. In Oman and the GCC it is used on closed cooling loops that run year-round at high ambient temperature.

Flow meters in the region often sit in cooling and utility circuits that run year-round at high ambient temperature. Scale, bubbles and dirt are the main sources of error, so strainers upstream and a full pipe at the measuring point matter more than any setting in the menu.

SV4200 compared with related ifm types

The table places the SV4200 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
SI5000 Calorimetric, M18 x 1.5, 30 bar, liquids and gases Related type
SV4200 Vortex, G 1/2, 1-20 l/min, to 90 C, IO-Link This page
SM6000 Mag-inductive, G 1/2 ext., 0.1-25 l/min, 16 bar Related type
SM6004 Magnetic-inductive flow meter Related type
SM8000 Magnetic-inductive flow meter Related type
SA5000 Flow sensor Related type

Information to send with an RFQ for the SV4200

To prepare an accurate offer for the SV4200, please include the following with your enquiry:

  • Medium (water, glycol solution or coolant) and temperature
  • Flow range and normal operating flow
  • Line size and G 1/2 thread requirement
  • Output required: switching, frequency or IO-Link
  • Quantity and delivery location

Documents and quotation

The official ifm data sheet for the SV4200 (document SV4200-00, English, issued 2 February 2023) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Other Models in the Ifm61 Flow Range

Seven Star LLC supplies models from the Ifm61 Flow range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
ifm SI5000 Flow Monitor, Calorimetric, Liquids and Gases, 30 barAutomation AccessoriesView details
ifm SV4200 Vortex Flow Meter with Display, G 1/2, 1-20 l/minAutomation AccessoriesYou are viewing this model
ifm SM6000 Magnetic-Inductive Flow Meter, G 1/2, 0.1-25 l/minAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet ifm SV4200 Data Sheet (PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm SV4200 Vortex Flow Meter with Display, G 1/2,

Answers from our engineering team on installation, compatibility and integration.

01What range does the ifm SV4200 measure?
1 to 20 l/min, or 0.06 to 1.2 m³/h. This is the value published by the manufacturer for the SV4200; confirm details before ordering.
02Which media is the SV4200 suitable for?
Water, glycol solutions and coolants. This is the value published by the manufacturer for the SV4200; confirm details before ordering.
03What accuracy does the SV4200 state?
Plus or minus 2 percent of the final value for water.
04What outputs are available on the SV4200?
Switching, frequency and IO-Link, configurable.
05What is the pressure rating of the SV4200?
12 bar (1.2 MPa). This is the value published by the manufacturer for the SV4200; confirm details before ordering.