- Automation & ControlView all 2,630 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm O8H200 Miniature Background Suppression Sensor, IO-Link
Description
ifm O8H200 Miniature Background Suppression Sensor, IO-Link
The ifm O8H200 is a miniature diffuse reflection sensor with background suppression. It measures only 28.1 x 8.1 x 14.4 mm, yet it detects objects between 3 and 15 mm (white paper 200 x 200 mm) with a compact red light spot of 4 mm at 633 nm. The PNP output is programmable as light-on or dark-on, carries 100 mA and switches at 1000 Hz, and the sensor has an IO-Link interface.
It is supplied with a 2 m PVC cable and protected to IP65 and IP67 for -25 to 60 degrees Celsius. Seven Star LLC supplies the O8H200 in Oman and the GCC as an independent supplier in Muscat.
O8H200 technical specifications
The table lists the values published by the manufacturer for the O8H200. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / O8H200 |
| Range [mm] | 3 to 15 (white paper 200 x 200 mm) |
| Function principle | Diffuse reflection sensor |
| Dimensions [mm] | 28.1 x 8.1 x 14.4 |
| Type of light | red light |
| Wave length [nm] | 633 |
| Max. light spot diameter [mm] | 4 |
| Operating voltage [V] | 10 to 30 DC |
| Current consumption [mA] | 20 ((24 V)) |
| Electrical design | PNP |
| Output function | light-on/dark-on mode (programmable) |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 1000 |
| Communication interface | IO-Link |
| Ambient temperature [°C] | -25 to 60 |
| Protection | IP 65; IP 67 |
| Weight [g] | 37.4 |
| Materials | housing: ABS; rear of the housing: stainless steel (316L/1.4404) |
| Cable | 2 m, PVC; 3 x 0.08 mm² |
| MTTF [years] | 751 |
How the O8H200 works
The O8H200 is a diffuse reflection sensor with background suppression: it emits a red light beam and evaluates the light returned from the target, using the geometry or the time of flight of the signal to decide whether the object is inside the set distance. Anything beyond that set distance, such as machine parts or a conveyor, is ignored regardless of how bright it is. This makes the sensor tolerant to differences in colour and surface, and the switching point can be adapted to the application.
Where the O8H200 fits and related parts
The O8H200 is a small short-range type. The O6H700 and OGH580 in our range cover longer distances in larger housings, and the O5P500 handles very long ranges with a reflector.
Selection and ordering checklist for the O8H200
Work through the points below before you confirm the order, so that the O8H200 you receive is the one your machine or plant needs.
- Confirm that the 3 to 15 mm range suits the gap
- Confirm the small size of the housing in the bracket
- Choose light-on or dark-on
- Decide whether IO-Link parameterisation is required
- Check the 2 m cable length
The manufacturer lists this article under the type designation Diffuse reflection sensor with background suppression, O8H-FPKG/IO-Link/2,0M. The article number O8H200 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Mount the sensor on a rigid bracket so that the beam meets the target at the intended angle, and keep the lens clean. Align the housing so the light spot lands on the object rather than on edges, and avoid placing a shiny background directly behind the sensing range. At commissioning, set the switching distance using the operating method of the device (pushbuttons or IO-Link), test with the darkest and brightest product you handle, and verify switching at the extremes of the part positions. Clean the lens in dusty areas and re-check the setting when the bracket or the product changes.
Typical applications in Oman and the GCC
Presence detection of small parts in assembly fixtures, grippers and magazines, and detection of small components on narrow conveyors. In Oman and the GCC it is used in compact automation cells and test benches.
Optical sensors on open conveyors and loading areas meet dust, sand and strong sunlight. Regular lens cleaning, a firm bracket and a check of the switching point after any mechanical change keep detection reliable.
O8H200 compared with related ifm types
The table places the O8H200 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| O5C500 | Colour sensor, RGB LED, 15-19 mm, 2 kHz | Related type |
| O5P500 | Retro-reflective, red light, 250 mm spot, 2 kHz | Related type |
| OGP500 | M18 stainless, retro-reflective, 200 mm spot, 80 C | Related type |
| O8H200 | Miniature, 3-15 mm, 4 mm spot, IO-Link | This page |
| O5D100 | Compact distance sensor | Related type |
| O6H700 | Background suppression sensor | Related type |
| OGH580 | M18 stainless diffuse sensor | Related type |
Information to send with an RFQ for the O8H200
To prepare an accurate offer for the O8H200, please include the following with your enquiry:
- Required detection distance and the target size and colour
- Mounting space and housing orientation
- Output polarity and wiring (connector or cable)
- Ambient conditions: light, dust, washdown
- Quantity and delivery location
Storage, handling and spares for the ifm O8H200
Keep ifm O8H200 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.
- Check the label and order code on every unit against the drawing before it goes into the panel.
- Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
- Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
- Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.
When you plan spares for a project, group the ifm O8H200 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.
Documents and quotation
The official ifm data sheet for the O8H200 (document O8H200-01, English, issued 7 August 2023) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Other Models in the Ifm61 Photo Range
Seven Star LLC supplies models from the Ifm61 Photo range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| ifm O5C500 Colour Sensor, RGB Light, Teach, 15-19 mm | Automation Accessories | View details |
| ifm O5P500 Retro-Reflective Sensor, Red Light, Teach, PNP | Automation Accessories | View details |
| ifm OGP500 Retro-Reflective Sensor M18, Stainless, Red Light | Automation Accessories | View details |
| ifm O8H200 Miniature Background Suppression Sensor, IO-Link | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Datasheet ifm O8H200 Data Sheet (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm O8H200 Miniature Background Suppression Sensor,
Answers from our engineering team on installation, compatibility and integration.
01What range does the ifm O8H200 have?
3 to 15 mm, specified on white paper of 200 x 200 mm.
02How big is the light spot of the O8H200?
A maximum light spot diameter of 4 mm. This is the value published by the manufacturer for the O8H200; confirm details before ordering.
03Does the O8H200 support IO-Link?
Yes, the communication interface is IO-Link. This is the value published by the manufacturer for the O8H200; confirm details before ordering.
04What size is the O8H200?
28.1 x 8.1 x 14.4 mm. This is the value published by the manufacturer for the O8H200; confirm details before ordering.
05What switching frequency does the O8H200 offer?
1000 Hz. This is the value published by the manufacturer for the O8H200; confirm details before ordering.


















Reviews
There are no reviews yet.