Brand:

Parker P045AA OIL-X Grade AA Replacement Filter Element

Description

P045AA OIL-X grade AA element for PX045 housings

The Parker P045AA is a replacement filter element from the OIL-X range for die-cast aluminium compressed air filters. It is a grade AA element, listed by Parker as AA high efficiency coalescing and dry particulate filtration with a rating of down to 0.01 micron, and it is intended for the P045 family of housings, models PX045H, PX045I. Each box holds one element, and Parker lists a 12 month change interval.

The 045 body is a mid-large casing for headers and machine groups. Its rated flow is more than ten times that of the 010 size, so it fits compressor-room outlets, dryer discharge lines and main process branches.

The part number reads as follows: P is the OIL-X element prefix, 045 is the housing size, and AA is the grade. The AA grade provides fine final-stage filtration in a typical multi-stage air line.

P045AA decoded

Part Meaning
P OIL-X replacement element
045 Housing size 045, used in PX045H, PX045I
AA Aa high efficiency coalescing and dry particulate

P045AA technical specifications

Parameter Specification
Manufacturer / part number Parker / P045AA
Product series OIL-X Genuine Replacement Compressed Air Filter Elements
Filter type AA AA high efficiency coalescing and dry particulate
Micron rating Down to 0.01 micron
For use with PX045 / P045 housings
Quantity per box 1
Number of elements 1
Element change interval 12 months
Application Compressed air and nitrogen gas
Technology Filtration

How the AA stage works in the line

A coalescing element captures fine liquid droplets, merges them into larger drops and lets them run down to the drain, while the same medium holds back dry particles. The AA grade is described by Parker with a rating of down to 0.01 micron. Because the AA grade is the high efficiency one, the OIL-X user guide states that a general purpose filter must always be installed upstream to protect it from bulk liquid aerosols and solid particulate. The user guide also stresses installing filtration at the lowest temperature above freezing, preferably after the aftercooler and receiver.

Housings and flow rates for P045AA

The following figures come from the OIL-X user guide and apply at 7 bar g (100 psi g) referred to 20°C, 1 bar a and 0% relative water vapour pressure.

Housing model Port Flow (l/s) Flow (m³/h) Flow (cfm)
PX045H 2″ 330 1188 699
PX045I 2½” 330 1188 699

A housing in this size measures 532 mm in height, 164 mm in width and 157 mm in depth, with a weight of 7.18 kg (15.82 lb). Rated flow in m³/min is 19.8.

Pressure and temperature limits for the AA element

Drain fitted Operating pressure Recommended temperature
Float drain 1.5 to 16 bar g 2 to 65°C
Manual drain 1 to 20 bar g 2 to 80°C

Housings for AO and AA run with a float drain as standard up to 16 bar g. Between 16 and 20 bar g a manual drain must be used, and Parker advises fitting an external automatic drain on those installations. These limits belong to the housing and the grade, so check them against the plant conditions before ordering.

Selecting the right size around P045AA

Sizing follows the minimum inlet pressure, not the nominal 7 bar value. Take the minimum pressure at the filter inlet, round it down to a whole bar and apply the correction factor from the user guide; the factor is 1.00 at 7 bar g, 1.33 at 5 bar g and 2.00 at 3 bar g. Multiply the real air flow by that factor and select a housing whose rated flow is equal or higher.

  • Confirm the housing is a PX045 or P045 unit.
  • Match the grade to the duty. Use AA when you need fine final-stage filtration.
  • Check whether the line runs above 16 bar g, which needs a manual drain.
  • Count the number of installed filters if you want to stock enough spare elements for one service round.

Fitting and servicing a P045AA element

Always depressurise before opening. The user guide describes the sequence: close the inlet and outlet valves, vent through the drain, unscrew the bowl and take out the used element. A strap wrench may be needed on the 050 and 055 bowls. Insert the new element with its lugs seated in the grooves, replace the O-ring in the head with the one supplied, and lubricate threads with an acid-free petroleum jelly.

Refit the bowl and rotate it through 720 degrees until the thread stop (360 for sizes 010 to 030, 720 for 035 to 045 and 540 for 050 to 055). Open the inlet slowly, wait one minute, then open the outlet slowly. Write the next change date on the service label. The AO and AA elements are changed every 12 months or 8736 hours, together with the automatic float drain.

Where the P045AA fits in Oman and the GCC

On a power-plant or desalination instrument-air header, an AA stage after the dryer and a general purpose stage keeps fine oil aerosol and particulate away from control valves and analysers. Oil and gas sites, power stations and desalination plants all rely on clean instrument air, and the combination of heat, dust, salt and humidity in the region loads filters heavily. The annual change schedule is a practical fit with plant shutdown planning.

Related OIL-X grades next to P045AA

Element Grade Rating Housing
P045AA AA AA high efficiency coalescing and dry particulate Down to 0.01 micron PX045
P045AO AO AO general purpose coalescing and dry particulate Down to 1 micron PX045

The user guide also lists the water separator grade WS and the carbon grade ACS for the same bodies. Other sizes in the element family include P010AO, P010AA, P015AA, P020AO, P045AA, P055AA and P055AO, each tied to its own housing size.

Details to send with your RFQ

  • Part number P045AA and the quantity of elements.
  • Housing model and port size, for example PX045H, with the nameplate details if available.
  • Operating pressure, temperature and the drain type fitted.
  • Position in the line: before or after the dryer.
  • Last change date and the number of elements per service round.

Documents and quotation

An OIL-X user guide covering the WS, AO, AA and ACS grades for the PX010 to PX055 housings is attached on this page. Please send the part number and the housing model, and we will confirm availability and lead time.

Seven Star LLC supplies industrial filtration spares in Oman and the GCC, delivering to Muscat and the industrial regions.

Other Models in the Parker Oilx Px Element Range

Seven Star LLC supplies models from the Parker Oilx Px Element range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Parker P010AO OIL-X Grade AO Replacement Filter ElementFiltration ElementsView details
Parker P010AA OIL-X Grade AA Replacement Filter ElementFiltration ElementsView details
Parker P015AA OIL-X Grade AA Replacement Filter ElementFiltration ElementsView details
Parker P020AO OIL-X Grade AO Replacement Filter ElementFiltration ElementsView details
Parker P045AA OIL-X Grade AA Replacement Filter ElementFiltration ElementsYou are viewing this model
Datasheets & Documents
  • PDF Manual Parker OIL-X User Guide (P045AA) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Parker Hannifin is an American manufacturer of motion and control technologies, founded in 1917 in Cleveland, Ohio, by Arthur L. Parker as the Parker Appliance Company. Its first product was a pneumatic brake system for trucks and buses. In 1957 the company bought Hannifin, a maker of hydraulic and pneumatic cylinders and valves, and took the Parker Hannifin name. It is headquartered in the Cleveland area and listed on the New York Stock Exchange.

Seven Star LLC supplies the Parker items that maintenance teams request most: Lucifer solenoid valves, including NAMUR types for actuated valves, along with filter elements and hydraulic gear pumps.

Parker company profile

Founded 1917, Cleveland, Ohio, USA, by Arthur L. Parker
Headquarters Cleveland area, Ohio, USA
Ownership Public company, New York Stock Exchange (PH), listed since 1964
First product Pneumatic brake system for trucks and buses
Product families Hydraulic pumps, cylinders and valves, pneumatic valves and FRLs, instrumentation fittings and valves, hoses and couplings, filtration (including Racor and Velcon), seals and O-rings

Milestones

  • 1917: Arthur L. Parker starts the Parker Appliance Company in Cleveland.
  • 1924: Parker restarts the business after a 1919 accident destroyed its inventory.
  • 1957: Parker acquires Hannifin and becomes Parker Hannifin.
  • 1964: The shares are listed on the New York Stock Exchange.

Parker product lines listed here

Most of the listing is Lucifer, the Parker solenoid valve line that many nameplates still show as a brand in its own right. The 341N types (341N01, 341N22, 341N31) are NAMUR-interface valves that bolt straight onto a pneumatic actuator to pilot it. The E131K03 is a direct-acting 3/2 valve, and the 322K4706 and 7341NAKBHNM0 are further Lucifer solenoid valves. Parker sells Lucifer valve bodies and their coils or electrical parts as separate items, so one body can be combined with different voltages and enclosure types.

Other Parker lines appear: a hydraulic gear pump (P51A478BEY25-07-ZY), a coalescing filter element (9000040001) and a Triple-Lok 37-degree flare tube fitting.

Where Parker components are used

Lucifer NAMUR valves sit on quarter-turn actuators for on-off and shutdown valves in oil and gas, power and water plants across the GCC. Line-mounted solenoid valves switch instrument air, water, steam and light oils on skids and machines. Gear pumps drive hydraulic power units and mobile equipment, and coalescing elements protect instrument air and gas sampling systems from oil and water aerosols.

Parker products we list

Family Examples
Solenoid Valves 7341NAKBHNM0 Lucifer Series Solenoid Valve, Lucifer 322K4706 2-Way Solenoid Valve, Lucifer 341N01 NAMUR Solenoid Valve, Lucifer 341N22 SOLENOID VALVE, Lucifer 341N31 NAMUR Solenoid Valve, Lucifer E131K03 Solenoid Valve
Filtration Elements 9000040001 Coalescing Filter Element
Pumps P51A478BEY25-07-ZY Hydraulic Gear Pump
Pipes & Fittings Triple-Lok 37° Flare Tube Fitting

Ordering Parker parts: what we need

Parker part numbers are long and every character counts. Please send:

  • Solenoid valves: valve number from the body, coil or electrical part number, voltage and frequency, and the Ex marking if the coil is certified
  • Gear pumps: the complete code from the nameplate, including the assembly number, which fixes displacement, shaft, ports and rotation
  • Filter elements: element number and the housing model it fits

A photo of the nameplate is welcome. We check the code against Parker documentation and identify the manufacturer's current equivalent if a number has been superseded.

Facts checked against Parker's centennial timeline and the Encyclopedia of Cleveland History, October 2026.

FAQ

Questions about the Parker P045AA OIL-X Grade AA Replacement Filter

Answers from our engineering team on installation, compatibility and integration.

01Which housings take the Parker P045AA element?
Parker lists the P045AA for PX045 and P045 housings, which in the OIL-X range means models PX045H, PX045I. Check the nameplate on the housing before ordering.
02What filtration does grade AA offer?
Parker rates the AA grade as AA high efficiency coalescing and dry particulate filtration, down to 0.01 micron. It is fine final-stage filtration, and the AA grade needs a general purpose stage ahead of it.
03How often should the P045AA be replaced?
Parker lists a 12 month element change interval, and the user guide gives 8736 hours, to be done together with the automatic float drain.
04What flow does a PX045 housing handle?
At 7 bar g the PX045H is rated 330 l/s, which is 1188 m³/h or 699 cfm. Lower inlet pressures need the correction factor from the guide.
05What is the maximum pressure for housings using P045AA?
With a float drain the range is 1.5 to 16 bar g. With a manual drain it extends to 20 bar g, and an external automatic drain is recommended above 16 bar g.