- Automation & ControlView all 1,608 products
- AC Drives
- Industrial Communications
- PLC & I/O Cards
- Vibration Monitoring
- Automation Accessories
- Controllers & Data Acquisition
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- Industrial Computers
- Servo Drives
- Motor Soft Starters
- HMI Displays
- Pneumatic Cylinders
- Isolator & Barrier
- Automation Software
- Machine Vision
- Robotics
Brand: MOXA
Moxa PT-G7728 Modular Layer 2 Managed Switch
Description
What the PT-G7728 does on the plant network
PT-G7728 is listed by Moxa as: Layer 2 modular managed Ethernet switch with 2 100/1000BaseSFP and 2 10/100/1000BaseT(X), 6 slots for Ethernet modules and 2 slots for power modules, for a maximum of 28G ports total. A modular Layer 2 rackmount managed switch with six slots for Ethernet modules and two for power modules, up to 28 gigabit ports in total, with hardware IEEE 1588v2 PTP.
On the datasheet side, the power input is With PWR-HV-P48 installed:; 110/220 VDC/VAC for the switch system; 48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices); ; With PWR-LV-P48 installed:; 24/48 VDC for the switch system; 48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices); ; With PWR-HV-NP installed:; 110/220 VDC/VAC for the switch system; ; With PWR-LV-NP installed:; 24/48 VDC for the switch system; operating temperature is -40 to 85°C (-40 to 185°F); dimensions are 443 x 44 x 280 mm (17.44 x 1.73 x 11.02 in); weight is 3080 g (6.8 lb); the enclosure is rated IP30.
Standards and approvals printed for this model include railway standard EN 50121-4; safety standard IEC 62368-1; UL 62368-1. Approvals can differ between variants of a series, so check the one on the exact order code.
Technical specifications
| Parameter | Specification |
|---|---|
| 10/100/1000BaseT(X) Ports (RJ45 connector) | 2 |
| 100/1000BaseSFP Ports | 2 |
| Module | 6 |
| Slot Combination | See the LM-7000H datasheet for information about the Ethernet, PoE+ (available by request), and PRP/HSR modules. |
| Management | IPv4/IPv6; SNMP Inform; SNMPv1/v2c/v3; DHCP Server/Client; DHCP Option 66/67/82; BOOTP; TFTP; LLDP; RARP; HTTP; HTTPS; Telnet; Flow control; Back Pressure Flow … |
| Filter | IGMP v1/v2/v3; GMRP; GVRP; 802.1Q; QinQ VLAN |
| Redundancy Protocols | Link Aggregation; MSTP; RSTP; STP; Turbo Chain; Turbo Ring v1/v2; V-ON; MRP |
| Security | RADIUS; TACACS+; SSH; Port Lock; Broadcast storm protection; MAB authentication; Sticky MAC; Access control list |
| Time Management | NTP Server/Client; SNTP; IEEE 1588v2 PTP (hardware-based) |
| Ethernet Software Features: Power Substation | IEC 61850 QoS; GOOSE Check |
| Industrial Protocols | EtherNet/IP; Modbus TCP |
| Priority Queues | 8 |
| Max. No. of VLANs | 256 |
| VLAN ID Range | 1 to 4094 |
| IGMP Groups | 4096 |
| MAC Table Size | 16 K |
| Packet Buffer Size | 12 Mbits |
| Jumbo Frame Size | 9.6 KB |
| Console Port | RS-232 (RJ45) |
| Storage Port | USB Type A |
| Operating Voltage | With PWR-HV-P48 installed:; 88 to 300 VDC, 90 to 264 VAC for the switch system; 46 to 57 VDC for PoE systems; ; With PWR-LV-P48 installed:; 18 to 72 VDC for the … |
| Input Current | With PWR-HV-P48 installed:; PWR input current (switch system); Max. 0.11 A @ 110 VDC; Max. 0.06 A @ 220 VDC; Max. 0.29 A @ 110 VAC; Max. 0.18 A @ 220 VAC; EPS input … |
| IP Rating | IP30 |
| Dimensions | 443 x 44 x 280 mm (17.44 x 1.73 x 11.02 in) |
| Weight | 3080 g (6.8 lb) |
| Installation | 19-inch rack mounting |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| EMC | EN 55032/35 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m; IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV; IEC 61000-4-5 Surge: Power: 4 … |
| Standards and Certifications: Power Substation | IEC 61850-3 Edition 2 Class 2 (EMC); IEEE 1613 |
| Railway | EN 50121-4 |
| Safety | IEC 62368-1; UL 62368-1 |
| Warranty Period | 5 years |
Where it fits and what to check
It is aimed at substation-class networks and large industrial cores where the interface mix and power redundancy are configured by module; check the datasheet for the specific standards it lists.
On the practical side, mounting is listed as 19-inch rack mounting; the stated MTBF is 583,604 hrs; the warranty period is 5 years. Treat the MTBF as a manufacturer prediction under its stated method, not a guarantee for your site.
Before ordering, confirm the line modules, power modules and SFPs you need, since the interface and power modules are chosen separately (see the datasheet ordering section). Seven Star LLC is an independent supplier in Muscat and quotes against the exact code you give us.
Related MOXA products: Moxa EDS-G508E 8-Port Managed Ethernet Switch, Moxa ICS-G7528A 28-Port Gigabit Rackmount Managed Switch, Moxa EDS-G512E-4GSFP 12-Port Full Gigabit Managed Switch, Moxa EDS-2008-EL 8-Port Fast Ethernet Unmanaged Switch, Moxa EDS-405A-PTP 5-Port Managed Switch with PTP and Moxa ICS-G7826A-20GSFP-2XG-HV-HV-T L3 Gigabit Managed Switch.
Features for substation automation
Moxa’s datasheet lists several functions aimed at power utility networks:
- IEC 61850-3 Edition 2 Class 2 compliance for EMC, plus IEEE 1613, so the switch can be installed in substation control rooms and relay panels.
- PRP (IEC 62439-3 Clause 4) and HSR (Clause 5) interface modules for zero-recovery-time redundancy.
- IEEE 1588 hardware time stamps, supporting the IEEE C37.238 and IEC 61850-9-3 power profiles for precise time synchronisation of protection relays and merging units.
- GOOSE Check for easier troubleshooting of GOOSE messages.
- A built-in MMS server based on the IEC 61850-90-4 switch data model, so power SCADA can monitor the switch like any other IED.
Immunity levels and reliability
EMS test levels include IEC 61000-4-2 ESD (8 kV contact, 15 kV air), IEC 61000-4-3 radiated immunity of 20 V/m from 80 MHz to 1 GHz, and 4 kV EFT and surge on both power and signal lines. The switch also meets EN 50121-4 for railway use. Moxa states an MTBF of 583,604 hours (Telcordia) and a 5-year warranty. Interface and power modules are hot-swappable, and power modules are available for 24/48 V DC and 110/220 V AC/DC supplies.
Documents and quotation
The Moxa datasheet for this family (moxa-pt-g7728-series-datasheet-v2.4) is attached to this page. Request a quotation with the exact order code, quantity and delivery location, and we will respond with availability.
More products in this range: Industrial Communications.
Datasheets & Documents
- Datasheet Moxa PT-G7728 series datasheet v2.4 Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Moxa is the Taiwanese maker of industrial networking equipment: Ethernet switches, serial device servers, protocol gateways, media converters, secure routers and remote I/O. It was founded in Taiwan in 1987 and started with serial communication products before moving into industrial Ethernet. It is headquartered in Taipei.
Seven Star LLC is an independent supplier in Muscat. We list Moxa switches, serial servers, gateways and converters, and supply them to control system integrators, utilities, oil and gas and building automation projects in Oman and the GCC by exact model.
Moxa at a glance
| Established | 1987, Taiwan |
|---|---|
| Headquarters | Taipei, Taiwan |
| First products | Serial communication boards and serial connectivity |
| Product families | Unmanaged, managed and rackmount industrial Ethernet switches, serial device servers, Modbus and fieldbus gateways, media converters, serial converters, secure routers, remote I/O and industrial computers |
Moxa products we list
| Family | Models | Typical use |
|---|---|---|
| Unmanaged switches | EDS-205A, EDS-208A, EDS-2008-EL, EDS-2010-ML, EDS-308, EDS-316, EDS-G2005-EL, EDS-G205, EDS-G308, EDS-P206A PoE | Simple plug-and-play networks inside control panels |
| Managed switches | EDS-405A, EDS-408A, EDS-508A, EDS-510A, EDS-510E, EDS-518A, EDS-528E, EDS-G508E, EDS-G509, EDS-G512E, ICS-G7528A rackmount | Redundant ring networks, VLANs and diagnostics for SCADA and DCS |
| Serial device servers | NPort 5110A, 5150A, 5210A, 5250A, 5410, 5450, 5610-8, 5650-8, 6150, IA5150A | Putting RS-232/422/485 devices on an Ethernet network |
| Protocol gateways | MGate MB3180, MB3170, MB3280, MB3270, 5101-PBM-MN, 5105-MB-EIP, 5109 DNP3, 5114 IEC 104 | Linking Modbus RTU/TCP, PROFIBUS, EtherNet/IP, DNP3 and IEC 60870-5-104 systems |
| Converters, routers and I/O | IMC-21A, IMC-101, IMC-21GA, TCF-142, TCC-100, TCC-80, TCC-120, EDR-G9010 router, ioLogik E2210 | Fibre links over long distances, serial conversion, network security and remote I/O |
The choice between switch types follows the network. An unmanaged switch simply forwards traffic and suits a small, isolated panel. A managed switch adds redundancy protocols (Moxa's Turbo Ring recovers a broken ring in milliseconds), VLANs to separate traffic, port mirroring and alarms, which a SCADA or DCS network needs. The suffix on a Moxa model also matters: "-T" means a wide operating temperature range (typically -40 to 75 °C), which is the safe choice for outdoor cabinets in the Gulf summer. "-MM-SC" or "-S-SC" means multi-mode or single-mode fibre with SC connectors.
Where Moxa products are used
In Oman and the GCC, Moxa equipment connects RTUs, PLCs, meters and protection relays in oil and gas fields, electrical substations, water and wastewater SCADA, transport, and building and energy management systems.
Ordering Moxa products: what we need
Send the complete model including all suffixes (for example EDS-508A-MM-SC-T), the quantity, and for fibre models the fibre type and distance. For gateways, tell us which two protocols need to be linked.
Facts checked against Moxa company information, October 2026.
Browse MOXA products by category: Industrial Communications.
Related products
Frequently Asked Questions
Moxa lists it as: Layer 2 modular managed Ethernet switch with 2 100/1000BaseSFP and 2 10/100/1000BaseT(X), 6 slots for Ethernet modules and 2 slots for power modules, for a maximum of 28G ports total. A modular Layer 2 rackmount managed switch with six slots for Ethernet modules and two for power modules, up to 28 gigabit ports in total, with hardware IEEE 1588v2 PTP.
The Moxa specification gives an input voltage of With PWR-HV-P48 installed:; 110/220 VDC/VAC for the switch system; 48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices); ; With PWR-LV-P48 installed:; 24/48 VDC for the switch system; 48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices); ; With PWR-HV-NP installed:; 110/220 VDC/VAC for the switch system; ; With PWR-LV-NP installed:; 24/48 VDC for the switch system. Check the terminal arrangement and, where relevant, the redundant-input wiring against your panel supply before ordering.
The listed operating temperature is -40 to 85°C (-40 to 185°F). Wide-temperature versions carry a -T suffix in Moxa's order codes where the series offers them, and they are separate order codes.
It is a managed switch, so VLANs, redundancy and security are set through its web, console or SNMP interfaces.
The official Moxa datasheet is attached to this page. Send Seven Star LLC the exact order code, quantity and delivery location for a quotation; we are an independent supplier in Muscat.


















Reviews
There are no reviews yet.