Winsonic NE11001-30844A 8-Port L3 Managed PoE+ Switch

Overview

The Winsonic NE11001-30844A is an 8-port Gigabit industrial Layer 3 managed PoE++ switch built for facilities that need carrier-grade routing intelligence at the network edge without sacrificing the ruggedness demanded by harsh industrial environments. Combining eight 10/100/1000Mbps PoE-capable RJ45 ports with four 10Gbps SFP+ uplink slots and a massive 320W PoE power budget, the NE11001-30844A is engineered to anchor demanding fiber-backboned industrial Ethernet rings, IP video surveillance backbones, and converged OT/IT networks where static routing, RIP, OSPF and BGP support are genuinely required rather than optional extras.

As the official authorized partner and exclusive regional representative for Winsonic, Seven Star LLC proudly supplies the NE11001-30844A to system integrators, panel builders and end users across the Sultanate of Oman and the wider GCC. Every unit supplied through Seven Star LLC comes with Winsonic firmware and access to local technical support, so that critical infrastructure projects in Muscat, Sohar and Salalah are backed by a regional partner.

Switching & Routing Architecture

Built around the RTL9311BR switching silicon, the Winsonic NE11001-30844A delivers full non-blocking Layer 2 and Layer 3 forwarding across its twelve total ports, with hardware-accelerated static routing plus RIP, OSPF and BGP protocol support that lets the switch participate directly in a facility’s dynamic routing topology rather than acting as a dumb edge device. VLAN segmentation, RSTP loop protection, granular QoS queuing and ACL-based traffic filtering round out the Layer 2 feature set, giving network engineers the tools to isolate OT traffic from IT traffic on the same physical infrastructure, a requirement that is increasingly mandated on GCC industrial automation and IIoT rollouts.

Each of the eight copper ports on the Winsonic NE11001-30844A supports PoE power delivery up to 90W per port under the 320W total budget, comfortably powering PTZ cameras, 5G small cells, industrial access points and PoE-powered sensor nodes from a single managed switch. On the Winsonic NE11001-30844A, the four 10Gbps SFP+ slots provide the fiber uplink headroom that a Gigabit-only switch cannot, letting the NE11001-30844A serve as an aggregation point for multiple access-layer switches without the uplink becoming the network bottleneck. IEEE 802.3az Energy Efficient Ethernet trims power draw during low-utilization periods, an increasingly relevant line item for facilities managing 24/7 network infrastructure energy budgets.

Engineering Design of the Winsonic NE11001-30844A

The Winsonic NE11001-30844A ships in a full aluminum alloy fanless enclosure that acts as a passive heatsink, eliminating the moving parts that are typically the first failure point in switches deployed inside sealed cabinets, roadside enclosures or unconditioned equipment rooms across the GCC’s high-ambient-temperature climate. An operating range of -40°C to 75°C means the switch is rated for direct deployment in outdoor cabinets, rooftop plant rooms and non-air-conditioned MDF/IDF closets without derating concerns during Gulf summer peaks.

On the Winsonic NE11001-30844A, dual DC power inputs provide true power redundancy, a mandatory design requirement on any switch supporting critical PoE loads such as security cameras or access control readers, since a single power fault should never take down an entire surveillance segment. The unit includes DIN-rail and wall-mounting hardware as standard, a dedicated RS-232 console port for out-of-band CLI management, and heavy surge protection rated to ±6kV on contact discharge and ±8kV through air, protecting the switch and everything connected to it from the lightning-induced transients common during Gulf shamal storms. The Winsonic NE11001-30844A’s compact 145 x 109 x 62mm dimensions let the switch fit into space-constrained control panels alongside PLCs, relays and other DIN-rail hardware.

Key Features

The Winsonic NE11001-30844A combines carrier-class routing with field-hardened construction in a compact DIN-rail form factor. Key capabilities include:

• 8 x 10/100/1000Mbps RJ45 PoE++ ports delivering up to 90W per port under a 320W total power budget.
• 4 x 10Gbps SFP+ fiber uplink slots for high-bandwidth aggregation and ring backbone connectivity.
• Hardware Layer 3 routing with Static Route, RIP, OSPF and BGP protocol support.
• Full Layer 2 feature set: VLAN, RSTP, QoS and ACL-based traffic control.
• IEEE 802.3az Green Ethernet energy-saving standard for reduced operating cost.
• Full aluminum alloy fanless enclosure rated for -40°C to 75°C continuous operation.
• Dual-input power redundancy and ±6kV/±8kV surge protection for lightning-prone installations.
• DIN-rail and wall-mount kit included, with a dedicated console port for CLI management.

Industrial Applications

The Winsonic NE11001-30844A is deployed as an aggregation switch across district cooling plants, RO desalination facilities, commercial HVAC control networks and large hospitality and hospital complexes throughout Oman and the GCC, environments where dozens of PoE cameras, access points and sensor nodes need to be aggregated onto a fiber backbone with real routing intelligence rather than a flat, unmanaged Layer 2 segment. In pharmaceutical and semiconductor cleanroom facilities, the switch’s Layer 3 segmentation capability is used to isolate process-control VLANs from corporate IT traffic, satisfying the network-segmentation clauses increasingly written into GCC industrial cybersecurity standards.

As the officially authorized partner for Winsonic, Seven Star LLC distributes the NE11001-30844A to EPC contractors and system integrators working on the Sohar and Salalah economic zones’ logistics, ports and heavy-industry projects, where the switch’s wide operating temperature range and surge-hardened design allow it to run reliably inside outdoor cabinets and unconditioned equipment rooms. Across Oman and the GCC, facility operators expanding IP video surveillance networks around the Winsonic NE11001-30844A, building 5G small-cell backhaul, or consolidating multiple access switches onto a routed backbone consistently select the NE11001-30844A for its combination of PoE power budget, fiber uplink capacity and true Layer 3 routing in a single DIN-rail unit.

Technical Specifications

The table below summarizes the core specifications of the Winsonic NE11001-30844A industrial L3 managed PoE switch.

Request a Quote for Winsonic NE11001-30844A

Seven Star LLC supports formal RFQ submissions, confirms lead time at quotation, and provides the full Winsonic technical datasheet for the NE11001-30844A on request. As the authorized partner for Winsonic in Oman and the GCC, our instrumentation and industrial networking division is available to help specify the right port count, PoE budget and routing configuration for your project, and to arrange delivery to project sites across Muscat, Sohar, Salalah and the broader Gulf region with local technical backing.

Browse the full Winsonic range or see more Industrial Communications products supplied by Seven Star LLC in Oman and the GCC.