Siemens 6XV1878-5TN15 IE TP Cord M12/RJ45 Industrial Ethernet Cable

Overview

The Siemens 6XV1878-5TN15 is a pre-assembled Industrial Ethernet twisted-pair patch cord from Siemens’ SIMATIC NET cabling range, terminated with a 180-degree M12 X-coded connector on one end and a 180-degree RJ45 connector on the other, delivered in a 15-metre length. The cable is purpose-built to connect industrial network devices such as SCALANCE switches, remote I/O, and field-mounted Ethernet nodes to standard RJ45 network infrastructure, bridging the gap between ruggedized field wiring and conventional IT equipment.

As the official authorized partner and exclusive regional representative for Siemens in the Sultanate of Oman, Seven Star LLC proudly supplies the Siemens 6XV1878-5TN15 cable with full manufacturer traceability and warranty support. Automation integrators and plant maintenance teams across Muscat, Sohar, and Salalah rely on Seven Star LLC to source genuine Siemens cabling, avoiding the signal degradation and connector failures associated with unauthorized aftermarket cable assemblies.

Engineering Design

The Siemens 6XV1878-5TN15 uses a 4-pair twisted, shielded flexible cable construction rated for the mechanical flexing and vibration common in industrial installations, terminated at the factory with connectors molded and tested to Siemens’ IP-rated environmental sealing standard. The M12 X-coded connector supports the higher data rates required by modern Industrial Ethernet protocols, while its threaded locking mechanism resists the vibration-induced disconnection that can occur with standard push-fit connectors in rotating or mobile equipment environments.

The permitted cable outer temperature range of -30°C to +80°C after assembly, combined with the cable’s flexible jacket, allows the 6XV1878-5TN15 to be routed through cable trays and conduit runs in both indoor control rooms and semi-exposed field locations without special protection. The factory-terminated, pre-tested design eliminates the need for field termination, reducing both installation time and the risk of a poorly crimped connector introducing intermittent network faults.

Key Features

The Siemens 6XV1878-5TN15 combines rugged mechanical construction with plug-and-play installation convenience, and the following features summarize why automation engineers specify genuine Siemens cabling for critical network links:

• Factory-terminated M12 X-coded and RJ45 connectors eliminate field termination errors and reduce installation time.
• Threaded M12 locking connector resists vibration-induced disconnection in rotating or mobile equipment applications.
• 4-pair shielded twisted construction supports the data rates required by modern Industrial Ethernet protocols.
• Wide permitted operating temperature range of -30°C to +80°C suits both indoor and semi-exposed installations.
• Flexible cable jacket eases routing through cable trays and conduit in tight panel and machine layouts.
• 180-degree cable outlet on both connectors minimizes bend radius stress at the termination point.
• 15-metre length suits typical field-device-to-switch cable runs without unnecessary splicing.
• Genuine SIMATIC NET manufacturing ensures compatibility and performance consistency across a plant’s network infrastructure.

Industrial Applications

The Siemens 6XV1878-5TN15 is used to connect SCALANCE industrial switches, remote I/O modules, and field-mounted Ethernet devices to plant automation networks across manufacturing, process, and utility facilities. In Oman, this cable class is commonly specified for district cooling plant control network wiring, water treatment SCADA field connections, and petrochemical facility distributed control system network links where rugged, factory-terminated cabling reduces installation risk on critical automation infrastructure.

As the officially authorized partner for Siemens, Seven Star LLC distributes SIMATIC NET cabling to automation integrators and EPC contractors throughout the Sohar and Salalah economic zones, supporting both new control system installations and cable replacement on existing Siemens automation networks across Muscat. Reliable, genuine cabling is a foundational element of the network integrity that plant automation systems depend on throughout the GCC.

Technical Specifications

The table below summarizes the key parameters of the Siemens 6XV1878-5TN15 Industrial Ethernet cable.

Why Choose Seven Star LLC for Siemens Industrial Ethernet Cables

An industrial Ethernet patch cord’s connector type, cable length, and IP-rated construction matter more in a plant environment than in a typical office, since a standard commercial cable exposed to vibration, moisture, or mechanical stress fails far sooner than a genuine industrial-rated cord designed for that duty. Seven Star LLC confirms the correct M12/RJ45 cable configuration and length against your specific installation before order confirmation, drawing on our authorized Siemens partnership across Oman and the wider GCC. We also support automation and network installation projects across Sohar and Salalah with bulk cable kitting alongside SCALANCE networking hardware, so a wireless or wired network project ships as one coordinated package, and our team can advise on cable grade selection where washdown exposure or continuous flexing at a cable-carrier application genuinely demands more than a standard-duty industrial cord.

Request a Quote for Siemens 6XV1878-5TN15 IE TP Cord M12/RJ45 Industrial Ethernet Cable

As the authorized partner for Siemens in Oman and the GCC, Seven Star LLC supports formal RFQ submissions, holds regional warehouse stock for rapid dispatch, and can provide the full technical datasheet for the Siemens 6XV1878-5TN15 cable on request. Contact the Seven Star LLC instrumentation division for genuine SIMATIC NET cabling and application engineering support across Muscat, Sohar, and Salalah.

Related Products

• QLSDM024DCCBN – Siemens QUADLOG Standard Discrete Module (14 VDC)
• Winsonic NE10001-20842B – IP68 EN50155 10G L2 Managed M12 PoE++ Switch
• Winsonic NE22005-103111 Industrial 5G VPN Router
• Advantech ADAM-4520 Isolated RS-232 to RS-422/485 Converter
• ExpertDAQ EX9520 RS232 to RS485 Isolated Converter
• MTL 5043 – Analog Output Isolator Module (4–20 mA)