Schneider Electric ZB4BV043 Red LED Pilot Light Head

Description

ZB4BV043: red pilot light head for a universal LED

The ZB4BV043 is a Schneider Electric Harmony XB4 head for a pilot light, with a red plain lens and a stated compatibility of Universal LED. It is a ZB4 chromium plated metal head with a round 29 mm outline for a 22 mm panel hole, and no lamp is included. Seven Star LLC supplies the ZB4BV043 in Oman and the GCC as an independent supplier in Muscat.

Red is the colour operators watch first and is normally reserved for stop, fault, trip or danger conditions. The head is shallow, 30 mm deep, so it can be used in thin enclosures.

Environmental data and approvals for ZB4BV043

The datasheet lists degrees of protection IP66, IP67, IP69, IP69K under IEC 60529 and impact rating IK06, with the UL enclosure type given as 4X/13. Operating temperature is -40–70 °C and storage temperature -40–70 °C. Vibration resistance is 5 gn (f= 2…500 Hz) per IEC 60068-2-6 and shock resistance is 30 gn for 18 ms or 50 gn for 11 ms, half sine, per IEC 60068-2-27. The datasheet lists these certifications: none stated for this variant. Standards named include IEC 60947-5-1, IEC 60947-5-4, UL 508, IEC 60947-5-5, JIS C8201-5-1, CSA C22.2 No 14.

The product environmental data section shows EU RoHS compliance and an average recycled plastic content of 44 per cent. Warranty is given as 18 months. A single-piece pack measures about 5 cm per side, and the bulk carton holds 300 pieces. Country of origin on the datasheet is France.

Information to send with an RFQ for ZB4BV043

Please send the details below so that we can confirm the part number against its datasheet.

  • Part number ZB4BV043 and quantity.
  • Lens colour and its meaning in the panel legend.
  • Lamp or LED block and supply voltage; the head is sold without a lamp.
  • Ambient temperature in the enclosure, to compare with the stated limit.
  • Panel cut-out size and thickness.
  • Approvals required for the project.
  • Delivery location and lead time.

If you are replacing a head, a photo of the old head and its rear blocks helps to confirm that the replacement matches.

How ZB4BV043 fits the ZB4 head system

A complete station built around this unit has three parts: the head, a fixing and contact assembly on the back, and a legend plate or marking on the front. The Harmony XB4 range sells heads and blocks as separate items, which lets a panel builder keep one stock of blocks and choose the face of each control later. Because the ZB4BV043 is sold as a head only, always confirm the block part numbers and their voltage and current ratings for your circuit from the matching datasheets.

When the control scheme is reviewed, the head, the legend and the rear blocks should be documented together, since a panel that is modified later is much easier to maintain when each station can be identified by its head part number. For spares, hold a few heads of each type rather than whole stations, because the heads are the parts most exposed to knocks, sun and cleaning chemicals.

Choosing ZB4BV043 from the pilot light heads

The five pilot light heads in this lane are split by colour and by lamp type. Decide first between LED and BA 9s, since it fixes the lamp block, then the colour.

Part number Colour Lamp Depth Max operating temp
ZB4BV013 White Universal LED 30 mm 70 °C
ZB4BV03 Green BA 9s 31 mm 55 °C
ZB4BV033 Green Universal LED 30 mm 70 °C
ZB4BV04 Red BA 9s 31 mm 55 °C
ZB4BV043 Red Universal LED 30 mm 70 °C

Installation and maintenance of ZB4BV043

Drill the panel to 22 mm and fit the head from the front, then clamp it with the collar or fixing blocks from the rear. Because the head carries no contacts, fit the contact or lamp blocks on the back only after the head is secured, and keep conductor ends clear of moving parts. Fit and torque the retaining parts as the datasheet’s mounting drawing shows; the drawing page gives the cut-out and clearance for the fitting.

During commissioning, operate this unit through its full range, check each contact state with a meter and confirm that the legend plate matches the function. In service, wipe the bezel clean, check seals during shutdowns, and replace any head that is cracked, loose or sticking. Keep a spare head in the maintenance store for panels that cannot be taken offline.

Lamp source and lens on ZB4BV043

A universal LED head accepts an LED block, so the colour comes from the lens and the supply voltage from the LED block. The datasheet shows composition codes with an integral LED, and also with an integral LED and transformer. Operating temperature extends to 70 °C.

The lens is plain, meaning smooth rather than faceted. Net weight is 0.026 kg.

Where ZB4BV043 is used

Pilot lights give status at a glance on motor starters, switchgear, pump skids, tank panels and utility boards: run, stop, fault, ready or supply present. Panels in Oman and the GCC see high ambient temperature, dust, wash-down on offshore and coastal sites and humidity from sea air, so the ingress rating of the head matters as much as its electrical function.

Technical specifications of the ZB4BV043

Parameter Specification
Manufacturer / part number Schneider Electric / ZB4BV043
Range Harmony XB4
Product type Head for pilot light
Device short name ZB4
Lens or cap colour Red
Additional information With plain lens
Compatibility Universal LED
Bezel material Chromium plated metal
Head shape Round
Mounting hole diameter 22 mm
Overall width / height / depth 29 mm / 29 mm / 30 mm
Net weight 0.026 kg
Operating temperature -40–70 °C
Storage temperature -40–70 °C
Degree of protection (IEC 60529) IP66, IP67, IP69, IP69K
Impact protection (IK) IK06
UL enclosure type UL type 4X/13
Vibration resistance 5 gn (f= 2–500 Hz) per IEC 60068-2-6
Warranty 18 months

Whatever head is chosen, treat the legend as part of the control function. A coloured head with no legend leaves operators guessing, and a legend that does not match the wiring is a common cause of commissioning errors. Agree the legend text with the process team before the order is placed.

Documents and quotation

The Schneider Electric datasheet for the ZB4BV043, dated 8 Nov 2026, is attached on this page for your technical file. It lists the characteristics, environmental data and dimension drawings summarised above.

To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please confirm that the datasheet data suits your project before ordering.

Other Models in the Se Xb4 Head Pl Range

Seven Star LLC supplies models from the Se Xb4 Head Pl range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Schneider Electric ZB4BV013 White LED Pilot Light HeadAutomation AccessoriesView details
Schneider Electric ZB4BV03 Green Pilot Light Head for BA9s BulbAutomation AccessoriesView details
Schneider Electric ZB4BV033 Green LED Pilot Light HeadAutomation AccessoriesView details
Schneider Electric ZB4BV04 Red Pilot Light Head for BA9s BulbAutomation AccessoriesView details
Schneider Electric ZB4BV043 Red LED Pilot Light HeadAutomation AccessoriesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Schneider Electric ZB4BV043 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric ZB4BV043 Red LED Pilot Light Head

Answers from our engineering team on installation, compatibility and integration.

01What is the ZB4BV043?
It is a Schneider Electric Harmony XB4 red pilot light head for integral LED. The datasheet lists it as a head only, so contact or lamp blocks are separate items.
02What panel hole does the ZB4BV043 need?
The datasheet lists a mounting diameter of 22 mm, and an overall envelope of 29 mm by 29 mm with a depth of 30 mm.
03What protection ratings are listed for the ZB4BV043?
The datasheet lists IP66, IP67, IP69, IP69K under IEC 60529 and IK06 for impact, with UL type 4X/13. Operating temperature is -40–70 °C.
04Does the ZB4BV043 include contact blocks or a lamp?
No. It is a head for the ZB4 system, and the electrical function comes from separate blocks selected for your circuit.
05Does Seven Star LLC supply the ZB4BV043 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.