Schneider Electric XB4BVG1 White Pilot Light 110-120 V AC

Description

XB4BVG1: white 110–120 V AC Harmony XB4 metal pilot light

The XB4BVG1 is a Schneider Electric Harmony XB4 pilot light for a 22 mm panel hole. It has a chromium-plated metal bezel, a round white plain lens, an integral universal LED and a rated supply of 110 to 120 V AC at 50/60 Hz. Seven Star LLC supplies the XB4BVG1 in Oman and the GCC as an independent supplier based in Muscat, normally to panel builders, maintenance stores and EPC contractors who need a robust indicator for a control desk or motor control centre door.

The datasheet titles of the four references in this group suggest a reading that we offer as our own interpretation, not a manufacturer ordering table: XB4BV is the metal pilot light with an integral LED, the letter and digit after it (G1) set the supply, and the colour is carried by the lens. Check the family table below when you compare siblings.

Mounting and wiring of the XB4BVG1

The XB4BVG1 mounts in a standard 22.5 mm round hole, and the dimension drawing in the datasheet gives a clamping thickness of 1 to 6 mm. The body measures 47 mm high, 30 mm wide and 54 mm deep behind the panel face and weighs 0.08 kg. The rear depth is the figure to check on shallow doors and when several lamps are stacked close to a terminal rail.

Connection is by screw clamp terminals marked (X1-X2)PL under the ISO numbering. The datasheet permits up to two conductors of 1.5 mm² with cable ends, or a single conductor from 0.22 mm² up to two of 2.5 mm² without ends. The metal fixing collar is zamak, and the head resists a high-pressure washer at 7000000 Pa and 55 °C from 0.1 m according to the datasheet, a useful figure for washdown areas.

Supply, LED and signalling of the XB4BVG1

The 110 V rating is the odd one out in this group, because the three other references use a 230 to 240 V supply. The 110–120 V AC rating fits panels with a 110 V control transformer secondary, a pattern common on motor control centres that were specified to American or older British practice. It is an AC lamp circuit, so it is not for DC supplies.

The datasheet lists the supply limits as 100–132 V AC and the current consumption as 14 mA, which is small enough for a long row of lamps on one control fuse. The light source is a universal LED with an integral base, so there is no bulb to change. The stated service life is 100000 h at rated voltage and 25 °C, and the signalling type is steady. A note at the head of the datasheet says a change in appearance may be seen on the product without affecting function or safety, and that this makes it compatible with the manufacturer’s universal LED blocks.

The XB4BV group and how XB4BVG1 differs

The four references share the same metal bezel, 47 × 30 mm head, IP66 sealing and 100000 h LED life. They separate on lens colour and supply voltage only, so selection is a two-step choice: first the supply of your lamp circuit, then the colour from your panel legend. The XB4BVG1 is the white 110–120 V AC member.

Reference Lens colour Supply
XB4BVG1 White 110–120 V AC
XB4BVM3 Green 230–240 V AC
XB4BVM4 Red 230–240 V AC
XB4BVM5 Orange 230–240 V AC

Sealing, immunity and approvals of the XB4BVG1

The datasheet lists protection ratings of IP66, IP67, IP69, IP69K, with UL type 4X/13 and IK06 impact protection. Operation and storage are both rated from -40 to 70 °C, a window that covers a summer-heated switch room and an unheated outdoor cabinet. Vibration resistance is 5 gn between 12 and 500 Hz, and the shock figures are 30 gn for 18 ms and 50 gn for 11 ms.

Electromagnetic data are given too: 1 kV surge withstand, 2 kV fast transients, 10 V/m field immunity, 6 kV contact and 8 kV air electrostatic discharge, and Class B emission. The certifications listed for this reference are CSA, UL listed. Marine and offshore buyers sometimes ask for ship-classification marks, and XB4BVG1 should only be accepted against a requirement that appears in the datasheet for this exact reference; this one lists no marine approval.

Selection checklist and RFQ information for XB4BVG1

Send the points below so that the part number can be confirmed against the datasheet and checked for availability in one reply.

  • Part number XB4BVG1 and the required quantity.
  • The lamp circuit supply, here 110 to 120 V AC at 50/60 Hz.
  • The lens colour (white) and its meaning on your legend.
  • Panel thickness at the hole, against the 1 to 6 mm clamping range.
  • Rear clearance behind the panel, against the body depth.
  • Any approval needed by the project, compared with the datasheet listing.
  • Delivery location in Oman or the GCC and the lead time you need.

Technical specifications of the XB4BVG1

Parameter Specification
Manufacturer / part number Schneider Electric / XB4BVG1
Range Harmony XB4
Product type Pilot light, metal bezel
Device short name XB4
Bezel / fixing collar Chromium plated metal / zamak
Head shape Round
Lens White, with plain lens
Light source / bulb base Universal LED / Integral LED
Rated supply voltage [Us] 110 to 120 V AC at 50/60 Hz
Supply voltage limits 100–132 V AC
Current consumption 14 mA
Signalling type Steady
LED service life 100000 h at rated voltage and 25 °C
Mounting diameter 22.5 mm
Terminal marking (ISO) (X1-X2)PL
Terminals Screw clamp; up to 2 × 1.5 mm² with cable end, or 1 × 0.22 to 2 × 2.5 mm² without cable end
Rated insulation voltage [Ui] 250 V, pollution degree 3
Rated impulse withstand [Uimp] 4 kV
Surge withstand 1 kV (IEC 61000-4-5)
Dimensions (H x W x D) 47 mm × 30 mm × 54 mm
Net weight 0.08 kg
Degree of protection IP66, IP67, IP69, IP69K; UL type 4X/13; IK06
Operating / storage temperature -40 to 70 °C / -40 to 70 °C
Electrical shock protection Class I (IEC 60536)
Vibration / shock 5 gn, 12–500 Hz / 30 gn 18 ms and 50 gn 11 ms
Certifications CSA, UL listed
Warranty 18 months

Typical uses of XB4BVG1 in Oman and the GCC

Indicators of this class, including this unit, are common on motor control centres, pump and fan starters, water treatment skids, switchgear doors and packaged equipment panels throughout the region. In oil and gas and petrochemical sites they sit on local control stations and auxiliary panels; in power and desalination plants they mark pump status, valve position and supply healthy.

The metal bezel resists knocks, sunlight and cleaning chemicals better than a plastic ring, which matters on coastal sites where heat, dust and salt air are routine.

Where a white indicator belongs

White is the neutral colour of a panel. It normally carries a general status such as control supply present, mode selected or step running, with no good-or-bad meaning attached, so it is often given to the lamp that proves the control circuit is live. The plain lens of the this unit carries no legend, so the function is normally identified by a nameplate or an engraved label beside it. When several lamps share a door, keep the colours in the same order from panel to panel so that an operator moving between plants reads each one the same way.

Documents and quotation

The Schneider Electric datasheet for the XB4BVG1 is attached on this page for your technical file. It carries the electrical, mechanical and environmental data summarised above, together with the dimension and panel cut-out drawings.

To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.

Datasheets & Documents
  • PDF Datasheet Schneider Electric XB4BVG1 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric XB4BVG1 White Pilot Light

Answers from our engineering team on installation, compatibility and integration.

01What supply does the XB4BVG1 use?
The datasheet lists 110 to 120 V AC at 50/60 Hz, with supply limits of 100–132 V AC and a current consumption of 14 mA. It is an AC lamp circuit.
02Can the lamp of the XB4BVG1 be changed?
The datasheet lists the bulb base as an integral LED, so there is no bulb to exchange. A failed unit is replaced as a whole.
03What panel hole does the XB4BVG1 need?
A round 22.5 mm hole, with a clamping thickness of 1 to 6 mm according to the datasheet drawing. Terminals are screw clamp type.
04What protection rating does the XB4BVG1 list?
IP66, IP67, IP69 and IP69K, with UL type 4X/13 and IK06, and operation from -40 to 70 °C.
05Does Seven Star LLC supply the XB4BVG1 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.