Schneider Electric XB4BP42 Red Projecting Push-Button 1 NC

Description

XB4BP42 red projecting push-button with boot

The XB4BP42 is a red projecting push-button from the Harmony XB4 metal range. It returns by spring, carries a clear boot over the button, is unmarked and has a 1 NC contact. Seven Star LLC supplies the XB4BP42 in Oman and the GCC as an independent supplier based in Muscat.

The projecting head stands proud of the bezel, which makes it easy to find with a glove, and the boot covers the button gap against dust and splash. The sections below are based on the datasheet.

Stroke, force and life of the XB4BP42

The datasheet gives an operating travel of 1.5 mm (NC changing electrical state) until the contact changes and 4.3 mm (total travel), with an operating force of 3.5 N NC changing electrical state. Mechanical life is 10000000 cycles, far above the 300,000 cycles quoted for the e-stops in the same family. The NC contact is rated with positive opening, which gives a reliable stop function for a stop button. Terminal marking is (21-22)NC.

XB4BP42 technical specifications

Parameter Specification
Manufacturer / part number Schneider Electric / XB4BP42
Range Harmony XB4, 22 mm metal
Product type Push-button
Operator spring return
Operator profile Red projecting, unmarked
Contacts 1 NC
Terminal marking (21-22)NC
Operating travel 1.5 mm (NC changing electrical state); 4.3 mm (total travel)
Operating force 3.5 N NC changing electrical state
Cap or boot Clear boot
Positive opening With (IEC 60947-5-1, appendix K)
Mechanical life 10000000 cycles
Insulation voltage Ui 600 V (pollution degree 3)
Impulse withstand Uimp 6 kV
Short-circuit protection 10 A cartridge fuse type gG
Terminals Screw clamp terminals, ≤ 2 × 1.5 mm² with cable end; Screw clamp terminals, 1 × 0.22–2 × 2.5 mm² without cable end
Dimensions 47 mm x 30 mm x 61 mm (H x W x D)
Net weight 0.082 kg
Ambient temperature, operation -40–70 °C
Degree of protection IP66, IP67
Impact protection IK06
Certifications listed CSA, LROS, BV, UL listed, DNV
Warranty 18 months

XB4BP42 compared with the other push-buttons

Part number Colour Contact Travel Force Positive opening
XB4BP21 Black 1 NO 2.6 mm (NO changing electrical state) 3.8 N NO changing electrical state Without
XB4BP42 (this page) Red 1 NC 1.5 mm (NC changing electrical state) 3.5 N NC changing electrical state With conforming to IEC 60947-5-1 appendix K
XB4BP61 Blue 1 NO 2.6 mm (NO changing electrical state) 3.8 N NO changing electrical state Without

Contacts and electrical ratings of the XB4BP42

What this unit can switch is set by its contact block: slow-break action, silver alloy (Ag/Ni) contacts, a 10 A conventional thermal current, 600 V insulation voltage at pollution degree 3 and 6 kV impulse withstand. The datasheet names a 10 A gG fuse as short-circuit protection. The utilisation-category ratings below are what a designer needs when the contacts drive coils or logic inputs.

  • 3 A at 240 V, AC-15, A600
  • 6 A at 120 V, AC-15, A600
  • 0.1 A at 600 V, DC-13, Q600
  • 0.27 A at 250 V, DC-13, Q600
  • 0.55 A at 125 V, DC-13, Q600
  • 1.2 A at 600 V, AC-15, A600

Sealing and environment of the XB4BP42

The degree of protection is IP66, IP67. The impact rating on the datasheet is IK06. Vibration resistance is 5 gn (f= 2–500 Hz). Shock resistance on the datasheet is 30 gn (duration = 18 ms) for half sine wave acceleration and 50 gn (duration = 11 ms) for half sine wave acceleration. The permitted operating ambient temperature is -40–70 °C.

Selection and installation of the XB4BP42

  • Colour: red, unmarked (no legend).
  • Contact: 1 NC.
  • Action: spring return, clear boot over the projecting head.
  • Panel hole: 22.5 mm.
  • Depth behind panel: 61 mm.

Cut the panel opening to 22.5 mm and secure this unit with the fixing torque the datasheet specifies (0.8–1.2 N.m). Conductors go into screw clamps: ≤ 2 × 1.5 mm² with cable end and 1 × 0.22–2 × 2.5 mm² without cable end. Accepted screwdrivers are Philips and pozidriv no 1 and flat 4 mm or 5.5 mm. If a legend is required, plan it with the panel designer, because the head is supplied unmarked.

Before handover, press the button with the circuit live, confirm the contact state changes at the stroke given above, and check that the boot is seated. Keep the test result with the panel documentation and repeat the check after any wiring change.

Where the XB4BP42 is used in Oman and the GCC

A red NC push-button is used as a stop or reset function on motor starters, conveyors and machine control panels. A boot helps in dusty and sandy conditions, and the metal bezel stands up to hot sun on outdoor field stations and to wash-down on process plant.

A red NC button is the classic stop colour. The NC contact opens the circuit when the button is pressed, and the datasheet rates it with positive opening, which means the contact is forced open mechanically. This is a stop button, not an emergency stop: the latter is a separate latching device with its own standard.

With an unmarked head, the function of the button comes from its colour and the plate beside it. Agree the labelling convention before the panel is built, and keep it identical across all panels of a plant so that operators do not need to learn each one separately.

Information to send with an RFQ for the XB4BP42

Please give us the exact reference XB4BP42, how many pieces you need and where they are going in Oman or the GCC. State the colour, the contact type (NO or NC) and whether a legend is required. For a replacement job, a clear photo of the old device and its marking removes any doubt about the match.

Documents and quotation

A copy of the Schneider Electric datasheet of this unit is attached to this page for download, and every value quoted here comes from that document.

For a quotation, use the RFQ form and quote XB4BP42 together with the quantity and the destination. Seven Star LLC will come back with stock status and delivery time.

Other Models in the Se Harmony Xb4 Pb Range

Seven Star LLC supplies models from the Se Harmony Xb4 Pb range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Schneider Electric XB4BP21 Black Projecting Push-Button 1 NOAutomation AccessoriesView details
Schneider Electric XB4BP42 Red Projecting Push-Button 1 NCAutomation AccessoriesYou are viewing this model
Schneider Electric XB4BP61 Blue Projecting Push-Button 1 NOAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Schneider Electric XB4BP42 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric XB4BP42 Red Projecting

Answers from our engineering team on installation, compatibility and integration.

01What contact arrangement does the XB4BP42 have?
The datasheet lists 1 NC, marked (21-22)NC. The contacts are slow-break with silver alloy (Ag/Ni) material and a 10 A thermal current.
02What electrical ratings does the XB4BP42 contact block have?
The datasheet gives 3 A at 240 V AC-15 and 6 A at 120 V AC-15, with a rated insulation voltage of 600 V and a 10 A gG fuse for short-circuit protection. Check these against your control circuit.
03How well is the XB4BP42 sealed?
The datasheet gives IP66, IP67 for the degree of protection and an operating range of -40…70 °C. Confirm the rating you need against the exact ordering reference.
04What is the stroke and force of the XB4BP42?
The datasheet gives an operating travel of 1.5 mm (NC changing electrical state) until the contact changes, 4.3 mm (total travel) total, and an operating force of 3.5 N NC changing electrical state.
05What panel hole and wiring does the XB4BP42 need?
The mounting diameter is 22.5 mm, and terminals take screw clamp conductors up to 2 x 1.5 mm² with cable ends. The tightening torque is 0.8…1.2 N.m.