- Automation & ControlView all 2,466 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric DBV312NSS DBSeT VTPN 12-Way 250A Board
Description
DBV312NSS: VTPN DBSeT 12-way surface-mount three-phase board
The DBV312NSS is a Schneider Electric VTPN distribution board in the DBSeT range, a three-phase 250 A board for a moulded-case incomer with 12 outgoer ways. The datasheet describes a distribution enclosure for low-voltage electrical distribution, supplied with a pan assembly, earthing bar and neutral bar behind a plain flat door, in the surface-mounting version. Seven Star LLC supplies the DBV312NSS in Oman and the GCC as an independent supplier based in Muscat.
Reading the reference from its title and datasheet, DBV3 is the three-phase VTPN group, the digits that follow give the outgoer way count, and the closing letters NSF or NSS carry the 250 A NSX-type incomer with flush or surface mounting. This is our reading of the naming and not a published ordering key, so rely on the datasheet for anything binding.
Moulded-case incomer and fault ratings of the DBV312NSS
The DBV312NSS steps up from the modular boards of its family: 250 A rated current, 220–440 V AC at 50/60 Hz on three phases, a rated short-time withstand current (Icw) of 25 kA for 0.3 s and a rated peak withstand current (Ipk) of 52.5 kA. The impulse withstand voltage is 6 kV and the insulation voltage is 500 V AC. The enclosure is designed to IEC 61439-3 and IEC 61439-1, with DEKRA certification shown on the datasheet.
The title names an NSX incomer, and the datasheet protection options list a moulded-case circuit breaker (MCCB) as the incoming device, with MCBs and RCBOs on the outgoing ways. The datasheet does not state which breaker frame or trip unit fits, so this must be confirmed from the data of the breaker you intend to fit. The depth also grows to 147.9 mm, compared with 124.9 mm on the 125 A boards, to make room for the heavier incomer.
Selection checklist and RFQ information for DBV312NSS
- Confirm a three-phase 220–440 V AC, 50/60 Hz supply and a maximum of 250 A.
- Compare the prospective fault level with 25 kA for 0.3 s and 52.5 kA peak.
- Count outgoers against 12 ways and allow for multi-pole devices and spares.
- Verify wall space or recess for 425 × 685 × 147.9 mm and the surface mounting.
- Decide on the incomer: an MCCB, and whether devices are quoted with the board.
For the RFQ please send the reference, quantity, delivery location, project name and a draft circuit schedule if available.
Comparing the DBV312NSS with its siblings
The table lists each surface-mount 250 A NSX-type board of the DBV group with the figures from its datasheet.
| Reference | Outgoer ways | W × H × D (mm) | Packed weight |
|---|---|---|---|
| DBV312NSS | 12 | 425 × 685 × 147.9 | 15.1 kg |
| DBV318NSS | 18 | 425 × 715 × 147.9 | 15.5 kg |
| DBV324NSS | 24 | 425 × 715 × 147.9 | 16.7 kg |
| DBV330NSS | 30 | 425 × 785 × 147.9 | 18.4 kg |
| DBV336NSS | 36 | 425 × 975 × 147.9 | 20.2 kg |
| DBV342NSS | 42 | 425 × 975 × 147.9 | 20.8 kg |
The 250 A group has a 25 kA Icw rating and a depth of 147.9 mm.
Surface mounting of the DBV312NSS
The surface version fixes to the wall face, so nothing needs to be cut and the full 147.9 mm depth stays in the room. The enclosure measures 425 × 685 × 147.9 mm (W × H × D), the packed weight is 15.1 kg and the carton measures 70.5 cm by 44.5 cm by 16 cm. Check that the wall construction can carry that load with proper fixings.
Cables enter through the removable gland plate at the top and bottom, so surface trunking or conduit can arrive from either direction. The flush twin is the DBV312NSF, listed at 685 mm height and 14.9 kg packed weight; read the datasheet of the exact reference because the figures are not always identical.
Where the DBV312NSS fits in Oman and the GCC
A 250 A moulded-case incomer suits a floor, wing or building section with a larger feeder: office blocks, accommodation buildings, workshops and service buildings at oil and gas, power and desalination sites. Typical loads are lighting, air-conditioning units, pumps and small machines on 12 outgoer ways.
Summer heat is the main stress. Compare the 50 °C ambient limit and the IP41 rating with the real room, because an air-conditioned electrical room is generally suitable while a roof cabinet or unventilated cabin in direct sun may not be. Mention dust and humidity when you enquire.
What 12 outgoer ways mean for the DBV312NSS
The datasheet lists 12 ways (outgoer). That is a count of single-pole positions on one bank, and a three-pole breaker or an RCBO uses more than one of them, so plan the layout from a device list with spare positions at the end. At a height of 685 mm and a packed weight of 15.1 kg, the DBV312NSS is the smallest board in its group.
No smaller sibling exists in this mounting style, and the next size up is the DBV318NSS with 18 ways. Width stays at 425 mm throughout the group; only height, weight and way count change.
Installing and maintaining the DBV312NSS
The enclosure is painted sheet steel, 1.2 mm thick, finished in White (RAL 9003), rated IP41 under IEC 60529 and IK08, for an ambient operating temperature of 50 °C. IP41 means indoor, dry rooms; it does not cover splash, outdoor or heavy dust exposure.
The DBV312NSS ships as an enclosure with pan assembly and bars, so the electrician fits the incomer and outgoer devices on site, connects neutral and earth to their bars, labels each way and tightens terminals to the device torque values. Test RCDs, record readings in the commissioning file and use thermal imaging under load during service to find loose connections. The datasheet lists an 18-month warranty.
Technical specifications of the DBV312NSS
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / DBV312NSS |
| Range | DBSeT (VTPN) |
| Product type | Distribution board, distribution enclosure |
| Application | Low voltage electrical distribution |
| Number of ways | 12 ways (outgoer) |
| Rated current [In] | 250 A |
| Rated voltage | 220–440 V AC 50/60 Hz |
| Network | 3 phases |
| Rated short-time withstand [Icw] | 25 kA for 0.3 s |
| Rated peak withstand [Ipk] | 52.5 kA |
| Rated impulse withstand [Uimp] | 6 kV |
| Rated insulation voltage [Ui] | 500 V AC |
| Incomer device | Molded case circuit breaker, MCCB (incomer) |
| Outgoer devices | MCB; RCBO |
| Provided equipment | Pan assembly, earthing bar, neutral bar, enclosure |
| Mounting | Surface |
| Door | Plain flat door |
| Cable entry | Removable gland plate at top and bottom |
| Material / colour | Painted sheet steel 1.2 mm thick / White (RAL 9003) |
| Width / height / depth | 425 / 685 / 147.9 mm |
| IP / IK | IP41 conforming to IEC 60529; IK08 |
| Operating ambient temperature | 50 °C |
| Standards | IEC 61439-3, IEC 61439-1 |
| Product certification | DEKRA |
| Packed weight | 15.1 kg |
| Package size (L / W / H) | 70.5 cm / 44.5 cm / 16 cm |
| Warranty | 18 months |
Documents and quotation
An official datasheet for the DBV312NSS is attached on this page. It carries the electrical ratings, enclosure details, packing data and environmental profile summarised above.
To request a quotation, send the part number, quantity and delivery location. Seven Star LLC will confirm lead time and commercial terms and can quote related devices with the board.
Other Models in the Se Dbset Dbv Ns Range
Seven Star LLC supplies models from the Se Dbset Dbv Ns range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric DBV312NSF DBSeT VTPN 12-Way 250A Board | Switchgear, Enclosures & Distribution | View details |
| Schneider Electric DBV312NSS DBSeT VTPN 12-Way 250A Board | Switchgear, Enclosures & Distribution | You are viewing this model |
| Schneider Electric DBV318NSF DBSeT VTPN 18-Way 250A Board | Switchgear, Enclosures & Distribution | View details |
| Schneider Electric DBV318NSS DBSeT VTPN 18-Way 250A Board | Switchgear, Enclosures & Distribution | View details |
Datasheets & Documents
- Datasheet Schneider Electric DBV312NSS Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric DBV312NSS DBSeT VTPN 12-Way 250A
Answers from our engineering team on installation, compatibility and integration.
01What incomer does the DBV312NSS take?
The datasheet lists a moulded-case circuit breaker (MCCB) as the incomer and the title names an NSX incomer; the exact breaker frame must be confirmed from its own data.
02What short-circuit ratings are listed for the DBV312NSS?
The datasheet gives 25 kA for 0.3 s (Icw) and 52.5 kA peak (Ipk), with 6 kV impulse withstand and 500 V AC insulation voltage. Compare them with the prospective fault level at site.
03How many outgoer ways does the DBV312NSS have?
The datasheet lists 12 ways (outgoer), 12 single-pole positions in total. Multi-pole breakers and RCBOs take more than one position.
04Does the DBV312NSS include breakers?
No. The listed equipment is a pan assembly, earthing bar, neutral bar and enclosure, so the incomer, MCBs and RCBOs are fitted separately.
05How is the DBV312NSS installed and where?
It is fixed on the wall surface, rated IP41 and IK08 with a 50 degC ambient limit, so it is for indoor dry rooms. The enclosure is 425 by 685 by 147.9 mm.


















Reviews
There are no reviews yet.