Brand:

Rotork IQ25 Multi-Turn Electric Valve Actuator

Description

Rotork IQ25 overview

The Rotork IQ25 is one size in the IQ range of intelligent multi-turn electric valve actuators, the family Rotork supplies for gate, globe, and other rising-stem or multi-turn valves, and (with a gearbox) for quarter-turn valves. The size number is a model designation rather than a torque figure, and for the Rotork IQ25 Rotork’s current IQ3 Pro electrical data for 3-phase supplies lists a rated torque of up to 400 Nm (295 lbf.ft). Procurement teams in Oman and the wider GCC regularly ask us for this exact designation because it is what appears on actuator nameplates and in spare-parts and replacement enquiries.

An IQ actuator is a self-contained package: the motor, integral reversing starter, local controls and the terminals for remote control and indication all sit in a sealed enclosure. Rotork’s published IQ specification asks for sealing to IP66 and IP68 (20 m for 10 days), a working ambient range of minus 30 to plus 70 degrees Celsius and settings that can be adjusted without removing covers. The IQ25 follows that pattern, which suits both coastal water plants and inland gas facilities.

This page is intended to help engineers and purchasers identify the IQ25 quickly, compare it with neighbouring sizes and prepare a clear enquiry. All figures come from Rotork’s own published electrical and specification documents, and where a value is not published we do not quote one.

Key features of the IQ25 actuator

  • Self-contained actuator with motor, reversing starter and local controls, so the IQ25 needs only power and control cables.
  • Torque setting range of 40 to 100 percent of rated torque and multi-turn position setting from 2.5 up to 8,000 turns, per the Rotork IQ specification.
  • Four configurable position and status contacts rated 5 mA to 5 A at 120 VAC or 30 VDC, plus a configurable monitor relay.
  • Integral datalogger with torque against position profiles, start counts and an event log with time and date, accessible by Bluetooth.
  • Network options named in the Rotork specification include Profibus, Modbus, Foundation Fieldbus, DeviceNet, Pakscan and HART.
  • Handwheel emergency operation with a lost-motion hammer-blow feature to unseat tight valves.

IQ25 technical specifications

Parameter Value
Manufacturer Rotork
Model IQ25
Range IQ / IQ3 Pro multi-turn electric actuator
Duty class (isolating) 15 minute rating, cyclic duration factor 25 percent (S2 / S3), EN15714-2 class A and B
Motor Low inertia squirrel cage induction motor, TENV, class F insulation, class B temperature rise
Motor protection Dual embedded thermostat (132 °C), stall limited to 5 seconds maximum
Listed speeds (400 V, 50 Hz) 18, 24, 36, 48, 72, 96, 144 and 192 rpm
Maximum rated torque 400 Nm (295 lbf.ft)
Lowest listed rated torque 140 Nm
Rated torque current at max torque row 4.0 A (400 V, 50 Hz)
Starting / stall current at max torque row 14.9 A
Data voltages 50 Hz 380, 400, 415, 440, 500, 690 V
Data voltages 60 Hz 208, 220, 400, 440, 460, 480, 575, 600 V
Source of electrical data PUB002-213

IQ25 electrical and performance data

The table lists each output speed published for the IQ25 under 3-phase supplies at 400 V and 50 Hz. Rotork compiles the values from averaged production test data, so use them for cable and protection sizing rather than as guaranteed unit values.

Speed (rpm) Poles Rated torque (Nm) Rated torque (lbf.ft) Starting / stall current (A) Rated torque current (A) Average torque current (A) Average power (kW)
18 4 400 295 14.9 4.0 2.7 1.1
24 4 400 295 14.8 4.4 3.2 1.2
36 4 298 220 15.3 4.3 2.9 1.1
48 4 244 180 12.9 4.0 2.2 1.0
72 2 244 180 21.2 5.7 2.6 1.4
96 2 230 170 21.5 6.6 2.8 1.7
144 2 149 110 21.2 6.2 2.8 1.6
192 2 140 103 33.6 9.1 3.8 1.7

The IQ range uses a lost-motion drive: the motor reaches full speed before the load is applied, which is why a IQ25 can unseat a stiff valve even when the supply is slightly low.

Typical applications in Oman and the GCC

In oil and gas facilities in Oman, the IQ25 is specified on isolation and control valves in gathering stations, pipelines and tank farms, where an actuator with integral controls and a lockable local/stop/remote selector simplifies operations. Utilities and power plants use similar IQ actuators on cooling water, feedwater and fuel lines. Water and desalination operators across the GCC rely on them for intake, transfer and distribution valves, where the sealed enclosure copes with humidity and dust. In manufacturing and petrochemical sites the IQ25 appears on process utilities and skid packages. Because the actuators are described by Rotork as suitable for indoor and outdoor use, with ambient limits of minus 30 to plus 70 degrees Celsius in the IQ specification, they suit the hot coastal climate of Muscat, Sohar and Duqm.

Typical valve types include gate and globe valves for multi-turn actuators and ball, plug and butterfly valves for part-turn actuators, so confirm the valve stem or shaft details when you request the IQ25.

Selection and compatibility notes for the IQ25

The electrical figures for the IQ25 are averages compiled from production test data and are intended for sizing cables, circuit protection and supply diversity, not as exact values for a single unit. Rotork notes that where a build cannot be produced at a given voltage because of excess current draw, the table says so. For voltages other than the ones listed, use the nearest published voltage as a guide and give Rotork the exact supply in your enquiry. Where the valve is a quarter-turn type, the actuator is paired with a second-stage gearbox selected to meet the required operating time.

A short guide to reading the Rotork electrical data helps when comparing builds. Rated torque is the catalogued torque output at full load and corresponds to a torque switch setting of 100 percent. The starting or stall figure is the current drawn at the moment the output begins to move, or when the motor is stalled, and Rotork notes that standard protection prevents stall by limiting torque to roughly 150 percent of rated torque when the torque switch bypass feature is enabled, with stall also limited to a maximum of 5 seconds. Rated torque current is the average current when the actuator produces the catalogue torque. Average, or nominal, torque corresponds to about one third of the rated figure, a value confirmed over decades of valve automation as representative of load across a typical stroke, and the table shows the current and power at that point. Isolating duty is rated for 15 minutes at a cyclic duration factor of 25 percent, which is why an actuator is not sized like a continuous running motor. The motor itself has low inertia rotors, squirrel cage construction, induction windings, a totally enclosed non-ventilated housing, class F insulation with class B temperature rise, and sealed bearings lubricated for life. Rotork also states that it underwrites rated torque output only, so electrical values should always be treated as guidance.

Match the IQ25 to the valve by the maximum valve torque including a safety margin, the stroke or number of turns, the mounting flange and the required operating time. Rotork’s sizing guidance says the actuator must guarantee valve closure at the specified differential pressure and temperature, with enough margin that the torque switch can still trip at maximum valve torque when the supply is 10 percent below nominal. Mention any hazardous-area, SIL or fieldbus requirement in your enquiry, because the certification of an actuator depends on the exact build.

Installation and commissioning

Check the base dimensions of the IQ25 against the Rotork IQ dimensional drawings, then fit the drive coupling machined to the valve stem or gearbox input shaft. The drive coupling sits in a detachable base designed to withstand five times the rated thrust,. With the terminal cover removed the enclosure keeps the same ingress protection, which helps on exposed plant. After wiring, use the Rotork setting tool to define open and close limits, torque levels and contact functions; the display can be rotated in 90 degree steps to suit the final orientation.

Rotork supplies a commissioning kit with its actuators comprising an installation manual, wiring diagram and cover seals. Keep the terminal compartment dry during cabling, and torque the cover fasteners evenly after wiring so the IQ25 retains its enclosure rating.

Maintenance and spare parts for the IQ25

Rotork designs the gear case as an oil-filled enclosure suitable for operation at any angle, and the motor and internal electrical elements are sealed from the environment, so routine maintenance on the IQ25 is mainly visual and functional. Check the cable glands, cover seals and fasteners during shutdowns, exercise infrequently used valves, and review the datalogger or event records for torque trends that point to valve wear. Replace seals if covers were opened. For hard-to-find parts and replacement units please send the full nameplate details together with the model IQ25.

Rotork IQ25 vs Other Rotork Multi-Turn Electric Valve Actuator Variants

The Rotork IQ25 is the choice when your application specifically needs IQ25. Ordering a neighbouring size or rating in this family is the most common cause of returns, so compare the figure on the existing unit or the design data sheet before you send an RFQ.

Variant Distinguishing detail
Rotork IQ18 Multi-Turn Electric Valve Actuator IQ18
Rotork IQ25 Multi-Turn Electric Valve Actuator (this page) IQ25
Rotork IQ35 Multi-Turn Electric Valve Actuator IQ35
Rotork IQ70 Multi-Turn Electric Valve Actuator IQ70
Rotork IQ90 Multi-Turn Electric Valve Actuator IQ90

FAQ summary

The most common questions we receive about the IQ25 concern its torque rating, available output speeds, supply voltage options, and how to specify a replacement. In short, the IQ25 is a Rotork multi-turn electric valve actuator; the data on this page is taken from the Rotork documents listed below; and the exact build always depends on the voltage, speed and options that you confirm in your RFQ. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Documents and quotation

The datasheet for the IQ25 is the Rotork electrical data document PUB002-213, which you can download from this page when available. To obtain pricing and lead time, send the RFQ with the part number IQ25, the quantity, supply voltage and frequency, valve type and any special requirements, and our team will respond promptly. Please note that the product is described by its model designation and that final configuration is confirmed against the manufacturer’s data.

Other Models in the IQ Range

Seven Star LLC supplies models from the IQ range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Rotork IQ10 Multi-Turn Electric Valve ActuatorElectric ActuatorsView details
Rotork IQ12 Multi-Turn Electric Valve ActuatorElectric ActuatorsView details
Rotork IQ18 Multi-Turn Electric Valve ActuatorElectric ActuatorsView details
Rotork IQ19 Multi-Turn Electric Valve ActuatorElectric ActuatorsView details
Rotork IQ20 Multi-Turn Electric Valve ActuatorElectric ActuatorsView details
Rotork IQ25 Multi-Turn Electric Valve ActuatorElectric ActuatorsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Rotork IQ25 Multi-Turn Electric Valve Actuator Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Rotork is a British flow control company best known for electric valve actuators. Jeremy Fry founded Rotork Engineering Company in Bath in 1957, the year its first actuator, the 100A, went on sale, and the group is still headquartered in Bath and listed on the London Stock Exchange. Today Rotork makes electric, pneumatic, hydraulic and electro-hydraulic actuators, gearboxes, precision regulators and valve positioners.

Seven Star LLC is an independent supplier listing Rotork actuators, Rotork Fairchild regulators, YTC positioners and spare parts for buyers in Oman and the GCC. Replacement units are matched from the actuator nameplate and wiring diagram number.

Rotork company profile

Origin Founded by Jeremy Fry in 1957 in Bath, England; first product the 100A valve actuator
Headquarters Brassmill Lane, Bath, United Kingdom
Ownership Rotork plc, a public company listed on the London Stock Exchange
Acquired brands Fairchild precision pneumatic controls (2011, Winston-Salem, USA), YTC valve positioners (Young Tech Co., Seoul, 2014), Mastergear gearboxes (2016)
Product families Intelligent electric actuators, control valve actuators, electro-hydraulic and fluid power actuators, gearboxes, precision regulators, positioners and network control systems

Milestones

  • 1957: Jeremy Fry founds Rotork in Bath, England; the first product is the 100A valve actuator.
  • 2011: Fairchild precision pneumatic controls (Winston-Salem, USA) is acquired.
  • 2014: YTC valve positioners (Young Tech Co., Seoul) is acquired.
  • 2016: Mastergear gearboxes is acquired.

Rotork actuators, regulators and positioners

Series Type Typical use
IQ3 Intelligent multi-turn electric actuator Gate and globe valves, penstocks and sluice gates; non-intrusive setup with a Bluetooth setting tool, double-sealed enclosure, data logging
IQT3 Intelligent part-turn electric actuator Ball, butterfly and plug valves and dampers, with the same setup and diagnostics as IQ3
CVA Precision control valve electric actuator Continuous modulating control of linear and part-turn control valves where instrument air is not available
CMA Compact modulating electric actuator Small control valves, chemical injection and metering pumps
Skilmatic SI3 Self-contained electro-hydraulic actuator Spring-return fail-safe and ESD duty with partial stroke testing, needing only an electrical supply
GP / GH Scotch yoke pneumatic (GP) and hydraulic (GH) actuators Large quarter-turn valves on pipelines and ESD service; spring-return or double-acting
CP Compact pneumatic quarter-turn actuator Smaller on-off ball and butterfly valves on plant air
Fairchild 10, 30, 55, 66, M11, 81 Precision pressure regulators Instrument air to positioners and actuators, test benches; Model 66 in stainless steel for corrosive and offshore sites
Fairchild 1000 No-bleed precision regulator Saves instrument air or gas where continuous bleed is not acceptable
Fairchild 10BP, 4000ABP Back pressure regulators Holding upstream pressure in process and test systems
YTC YT-1000, YT-3300 Valve positioners Electro-pneumatic (YT-1000) and smart HART (YT-3300) positioning of linear and rotary pneumatic actuators

Where Rotork equipment is used

Rotork actuators are common on oil and gas pipelines and terminals, refineries and gas plants, water and wastewater networks, desalination plants and power stations. Electric IQ actuators handle isolation valves on long pipelines and water mains, often networked over Rotork Pakscan, Modbus or another fieldbus. Skilmatic and scotch yoke actuators cover emergency shutdown valves, and Fairchild regulators and YTC positioners sit on pneumatic control valves throughout process plants.

Ordering Rotork actuators and spare parts: what we need

Send photos of the actuator nameplate with the model, serial number and wiring diagram number; the wiring diagram is usually inside the terminal cover. Rotork can identify the original build, including options and control interface, from the serial number. For a new application add the valve type and size, required torque or thrust, operating time, mounting flange (ISO 5210 or ISO 5211), power supply, control signal or network protocol, fail-safe requirement and hazardous-area marking. For regulators and positioners send the full model code and the pressure or signal ranges.

Facts checked against Rotork plc company information and product data, October 2026.

FAQ

Questions about the Rotork IQ25 Multi-Turn Electric Valve Actuator

Answers from our engineering team on installation, compatibility and integration.

01What is the maximum rated torque of the Rotork IQ25?
In the Rotork electrical data for 3-phase supplies at 400 V and 50 Hz, the IQ25 is listed with a maximum rated torque of 400 Nm (295 lbf.ft) at its 18 rpm build, and a lowest listed torque of 140 Nm at the fastest speed shown.
02Which output speeds are listed for the IQ25?
The data table for 3-phase supplies at 400 V and 50 Hz lists 18, 24, 36, 48, 72, 96, 144 and 192 rpm for the IQ25. Other speeds, supply voltages or options may exist, so confirm the exact build in your RFQ.
03What current does the IQ25 draw at rated torque?
For the 18 rpm build under 3-phase supplies at 400 V and 50 Hz, Rotork lists a rated torque current of 4.0 A and a starting or stall current of 14.9 A. Individual production test certificates are available from the manufacturer for exact unit values.
04Can the IQ25 be set up without opening the covers?
Rotork describes setting of torque levels, position limits and indication contacts for the IQ family over an infrared or Bluetooth wireless interface, without removing the actuator covers and, where needed, without mains power.
05How do I request a quotation for the IQ25?
Send the part number IQ25 with quantity, speed, supply voltage, valve details and any hazardous-area or network needs, and we will answer your RFQ. Seven Star LLC is an independent supplier and is not affiliated with Rotork.