- Automation & ControlView all 2,471 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Rittal
Rittal AX 1181.000 Compact Enclosure 800 x 1000 x 400 mm
Description
AX 1181.000 compact enclosure 800 x 1000 x 400 mm decoded
The Rittal AX 1181.000 is a single-door, wall-mounted compact enclosure in sheet steel, 800 x 1000 x 400 mm (W x H x D), supplied complete with a mounting plate. The AX 1181.000 is an 800 x 1000 x 400 mm sheet steel body with IK10 impact protection and a perforated door strip. Seven Star LLC supplies AX 1181.000 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.
The table decodes AX 1181.000 element by element, so a buyer can check it against a drawing or an enquiry.
| Element | Value | Meaning |
|---|---|---|
| AX | Product family | Compact enclosure series with a higher impact rating than the AE series |
| AX 1181.000 | Article number | Identifies the exact size, material and lock arrangement in the manufacturer catalogue |
| 800 x 1000 x 400 mm | Outer dimensions | Width x height x depth of the enclosure body |
| Sheet steel | Shell material | Applies to body and door; the mounting plate is zinc-plated sheet steel |
| 1 door, cam | Door and lock | Lock arrangement: 2 cam locks with 3 mm double-bit inserts |
AX 1181.000 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Rittal / AX 1181.000 |
| Product description | AX Compact enclosure, W x H x D: 800x1000x400 mm, sheet steel, with mounting plate, single-door, with two cam locks |
| Dimensions (W x H x D) | 800 x 1000 x 400 mm |
| Material | Sheet steel |
| Wall thickness (enclosure / door) | 1.5 mm / 2 mm |
| Finish | Dipcoat primed, powder-coated on the outside, textured paint, RAL 7035 |
| Mounting plate (W x H) | 745 x 975 mm, 2.5 mm thick |
| Doors / lock | 1 / cam, 2 cam locks with 3 mm double-bit inserts |
| IP rating (IEC 60529) | IP 66 |
| NEMA type | NEMA 1, 3R, 4 and 12 |
| Impact protection | IK10 (20 J) |
| Gland plate | Size 5, quantity 2 (metal, in the base) |
| Net / gross weight | 56 kg / 57 kg |
| Approvals listed on the article page | Bureau Veritas, DNV, Lloyd’s Register, UL + C-UL (listed) |
All values are those printed for article AX 1181.000 on the manufacturer product page. Colour, plate sizes and weights are nominal catalogue figures, so confirm them against the technical drawing before cutting any panel.
How the AX 1181.000 enclosure is built
The AX shell is sheet steel, 1.5 mm for the body and 2 mm for the door, dipcoat primed and powder-coated in textured RAL 7035 with a zinc-plated 2.5 mm mounting plate. A foamed-in polyurethane seal runs round the door and the delivery includes a perforated door strip and two gland plates in the base. The higher IK10 impact class, against IK08 on the AE series, is the main reason to choose AX in exposed positions.
At 56 kg net (57 kg packed), AX 1181.000 is a heavy item that needs lifting gear or at least three people, plus a wall or frame rated for the full loaded weight. The shell geometry, the door seal and the lock are those of its series, so spare seals and locks follow the family part lists rather than a one-off design.
Protection ratings of AX 1181.000
AX 1181.000 carries IP 66 to IEC 60529, meaning the enclosure is dust-tight and protected against powerful water jets. The article page lists the equivalent NEMA type as NEMA 1, 3R, 4 and 12; the AX page lists NEMA 1, 3R, 4 and 12, so it covers both indoor and outdoor duty classes. Mechanical impact protection is IK10, equal to 20 joules of impact energy under IEC 62262, four times the energy of the IK08 class that applies to the AE series. The article page lists these approvals for this article: Bureau Veritas, DNV, Lloyd’s Register, UL + C-UL (listed). Check the certificate that matches your project before you rely on a marine or listed rating, because approvals are tied to the article number and the configuration.
Internal space and mounting layout of AX 1181.000
The enclosure has an outer volume of roughly 320000 litres. The mounting plate measures 745 x 975 mm, which gives about 0.73 m² of panel for DIN rail, terminals, contactors and drives. The door and body walls take space too, so the usable clearance behind the door is smaller than the 400 mm outer depth suggests; keep a margin for cable bend radius and for components that stand proud of the rail.
A 745 x 975 mm plate in a 400 mm deep body provides a very large volume of about 320 litres. Two gland plates in the base help cable entry from below. The deep body is suited to drives, large contactors and equipment with generous cable bends.
Selection and ordering checklist for AX 1181.000
- Confirm the free panel area: 745 x 975 mm must hold every device plus wiring duct and spare room.
- Check outdoor exposure against IP 66 and NEMA 1, 3R, 4 and 12; add a canopy where direct sun or a hot wall is expected.
- Match the lock: 2 cam locks with 3 mm double-bit inserts; plan the key or insert type with the site rules.
- Plan cable entry: gland plate size 5, quantity 2, and the glands needed. Seal every cut-out to the same IP class.
- Compare dissipated power with the shell surface; a cooling or ventilation accessory may be needed above a few hundred watts in hot rooms.
- Check wall strength and fixing method for a net weight of 56 kg plus the installed equipment.
For AX 1181.000 the outer volume of about 320000 litres and the 745 x 975 mm plate should hold your devices with roughly a third of the plate left free for wiring ducts and later additions. If the free area drops below that, step up to the next size in the table further down.
Installation, commissioning and maintenance of AX 1181.000
- Unpack and inspect the door seal and paint before mounting; report transport damage at once.
- Fix the enclosure to a flat surface with the mounting hardware so the shell is not twisted, because a twisted body lets the door seal leak.
- Drill cable entries in the gland plate or the sides only after layout is final, and deburr and seal each opening.
- Bond the door and mounting plate to protective earth with proper straps, following local electrical rules.
- During commissioning, close the door fully and check that the seal is evenly compressed; a gap shows as a light line along the edge.
- In service, inspect the seal, hinges and lock once or twice a year, and clean the surface with a mild detergent.
Record the key or insert type and keep a spare set with the maintenance team; a lost key on a sealed panel usually means cutting the lock.
Typical applications of AX 1181.000 in Oman and the GCC
It is a choice for demanding industrial and outdoor locations where mechanical knocks from vehicles or maintenance are likely, for example plant roads, loading areas, utility yards and equipment skids.
Large enclosures need planning for transport, lifting and the route through doors and stairwells; confirm the access path to the final position before the order is placed.
Where AX 1181.000 sits in the range
AX 1181.000 belongs to a graded series in which width, height, depth and the lock layout change step by step. The neighbouring articles in the table below show how this body compares in size, so you can check whether a smaller or a deeper box would still fit your equipment.
Information to send with an RFQ for AX 1181.000
A short enquiry saves a round of questions. Please include:
- Exact article number AX 1181.000 and the quantity.
- Installation site: indoor or outdoor, sun exposure, wall or pillar, coastal or inland.
- Equipment to be mounted and its total dissipated power in watts.
- Cable entry plan: number, size and side of glands.
- Lock and key requirement, plus any padlock or handle upgrade.
- Approvals or inspection documents your project requires.
- Delivery location in Oman or the GCC and the date needed.
Documents and quotation
Send the part number AX 1181.000 and we will confirm the documents that are available for it.
Give us the quantity as well and Seven Star LLC will confirm availability, lead time and delivery to your site in Oman or the GCC.
Datasheets & Documents
- Datasheet Rittal AX 1181.000 Compact Enclosure Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Rittal is a German manufacturer of enclosures, power distribution, climate control and IT infrastructure, founded in 1961 by Rudolf Loh in Rittershausen, Hesse, as Rudolf Loh Elektrogerätebau. In its first year it launched the first standard enclosure, built in series and available from stock instead of made to order. Rittal is headquartered in Herborn and belongs to the family-owned Friedhelm Loh Group.
Seven Star LLC is an independent supplier in Muscat. We list Rittal enclosures, cooling units and power distribution products for panel builders and maintenance teams in Oman and the GCC.
Rittal company profile
| Founded | 1961, Rittershausen (Dietzhölztal), Germany, by Rudolf Loh |
|---|---|
| Headquarters | Herborn, Hesse, Germany |
| Ownership | Friedhelm Loh Group (Loh family); sister companies include Eplan and Cideon |
| Idea | Standard enclosures in series production, available from stock |
| Product families | VX25 and AX/KX enclosures, TS 8 baying systems, Blue e+ cooling units and fan-and-filter units, RiLine busbar systems, IT racks and data centre modules |
Milestones
- 1961: Rudolf Loh founds the company and launches the first standard enclosure.
- 1969: The company takes the Rittal name, according to Rittal.
- 2021: Rittal marks 60 years.
Rittal product series
Enclosures include the TS 8 free-standing bayable system, AE compact enclosures such as the AE 1380.500 and AE 1034.500, and the CS outdoor wall-mounted enclosure. For hazardous areas there are the KEL 9404.600 stainless steel and AX 9206.100 plastic Ex enclosures. Power distribution is covered by the VX25 Ri4Power switchgear system and its 185 mm busbar system.
Climate control includes Blue e+ wall-mounted cooling units, the TopTherm Blue e SK 3273.500 roof-mounted unit and the LCP Inline CW liquid cooling package for IT racks.
Where Rittal products are used
Machine and process control panels, motor control and power distribution switchboards, outdoor telecom and utility cabinets, junction boxes in hazardous areas and IT racks. In the Gulf, cabinet cooling is often the deciding factor for reliable electronics.
Rittal products we list
Ordering Rittal products: what we need
Rittal parts are ordered by a seven-digit model number such as 9404.600. Send that number, or the width, height and depth, material, protection category and door arrangement. For cooling units add the cooling output, rated voltage and mounting cut-out of the unit being replaced; for Ex enclosures, the zone and marking required.
Facts checked against Rittal's own company pages and Friedhelm Loh Group material, October 2026.
Browse Rittal products by category: Automation Accessories, Switchgear, Enclosures & Distribution, Enclosure Climate Control.
FAQ
Questions about the Rittal AX 1181.000 Compact Enclosure 800 x 1000 x
Answers from our engineering team on installation, compatibility and integration.
01What is the Rittal AX 1181.000?
It is a single-door wall-mounted enclosure in sheet steel, 800 x 1000 x 400 mm, supplied with a mounting plate and 2 cam locks. The net weight is 56 kg.
02What protection ratings does AX 1181.000 have?
The article page lists IP 66 to IEC 60529, NEMA 1, 3R, 4 and 12 and IK10 impact protection. Check the ratings against the installation site, because a rating applies only while every cut-out is sealed.
03How large is the mounting plate of AX 1181.000?
The plate measures 745 x 975 mm and is 2.5 mm thick. The outer volume of the enclosure is about 320000 litres, and the free depth behind the plate is smaller than 400 mm.
04How does AX 1181.000 differ from the AE series?
The AX page lists IK10 impact protection against IK08 for AE, plus a perforated door strip and two gland plates in the delivery. Size and ratings differ, so compare the technical details before substituting.
05Does Seven Star LLC provide a document for AX 1181.000?
Send the part number AX 1181.000 and the quantity and we will confirm available documents, availability and lead time in Oman and the GCC. Seven Star LLC is an independent supplier.


















Reviews
There are no reviews yet.