Brand:

Rittal KS 1479.500 Plastic Enclosure Window 800 x 1000 x 300

Description

KS 1479.500 plastic enclosure 800 x 1000 x 300 mm decoded

The Rittal KS 1479.500 is a single-door, wall-mounted plastic enclosure in fibreglass-reinforced unsaturated polyester, 800 x 1000 x 300 mm (W x H x D), supplied complete with a mounting plate. This large plastic body, 800 x 1000 x 300 mm, has a viewing window in the door and a 3-point lock system. Seven Star LLC supplies KS 1479.500 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

The table decodes KS 1479.500 element by element, so a buyer can check it against a drawing or an enquiry.

Element Value Meaning
KS Product family Fibreglass-reinforced polyester enclosure series with a dyed, non-metallic shell
KS 1479.500 Article number Identifies the exact size, material and lock arrangement in the manufacturer catalogue
800 x 1000 x 300 mm Outer dimensions Width x height x depth of the enclosure body
Fibreglass-reinforced unsaturated polyester Shell material Applies to body and door; the mounting plate is zinc-plated sheet steel
1 door, 3-point lock system Door and lock Lock arrangement: a 3-point lock system with a single 3 mm double-bit insert

KS 1479.500 technical specifications

Parameter Specification
Manufacturer / part number Rittal / KS 1479.500
Product description KS Plastic enclosure, W x H x D: 800x1000x300 mm, Fibreglass-reinforced unsaturated polyester, with mounting plate, with door, viewing window
Dimensions (W x H x D) 800 x 1000 x 300 mm
Material Fibreglass-reinforced unsaturated polyester
Colour / finish Dyed plastic, similar to RAL 7035, no after-treatment
Mounting plate (W x H) 717 x 950 mm, 3 mm thick
Doors / lock 1 / 3-point lock system, a 3-point lock system with a single 3 mm double-bit insert
IP rating (IEC 60529) IP 56
NEMA type NEMA 12
Impact protection IK08 (5 J)
Net / gross weight 38 kg / 39.5 kg
Approvals listed on the article page Bureau Veritas, TÜV
Ambient temperature -30 °C to +75 °C

All values are those printed for article KS 1479.500 on the manufacturer product page. Colour, plate sizes and weights are nominal catalogue figures, so confirm them against the technical drawing before cutting any panel.

How the KS 1479.500 enclosure is built

The enclosure and the door are moulded from fibreglass-reinforced unsaturated polyester, dyed through in a shade similar to RAL 7035 and delivered without after-treatment. The door has an all-round foamed-in polyurethane seal plus a twin seal on its upper and lower edges that works as an integral rain protection strip. Press-fitted C sections at the sides let the zinc-plated mounting plate be set to any depth, and the manufacturer quotes an ambient range of -30 °C to +75 °C.

At 38 kg net (39.5 kg packed), KS 1479.500 is a heavy item that needs lifting gear or at least three people, plus a wall or frame rated for the full loaded weight. The shell geometry, the door seal and the lock are those of its series, so spare seals and locks follow the family part lists rather than a one-off design.

Protection ratings of KS 1479.500

KS 1479.500 carries IP 56 to IEC 60529, meaning the enclosure is protected against harmful dust deposits and against powerful water jets. The article page lists the equivalent NEMA type as NEMA 12, an indoor type that guards against dust and dripping liquids; the manufacturer rates this large door with viewing window lower than the smaller KS sizes. Mechanical impact protection is IK08, equal to 5 joules of impact energy under IEC 62262. The article page lists these approvals for this article: Bureau Veritas, TÜV. Check the certificate that matches your project before you rely on a marine or listed rating, because approvals are tied to the article number and the configuration.

Internal space and mounting layout of KS 1479.500

The enclosure has an outer volume of roughly 240000 litres. The mounting plate measures 717 x 950 mm, which gives about 0.68 m² of panel for DIN rail, terminals, contactors and drives. The door and body walls take space too, so the usable clearance behind the door is smaller than the 300 mm outer depth suggests; keep a margin for cable bend radius and for components that stand proud of the rail.

A 717 x 950 mm plate and a window let operators read indicators and displays without opening the door, which keeps the interior protected during inspection rounds. The IP 56 and NEMA 12 rating is lower than for the smaller KS sizes, so site it with that in mind.

Selection and ordering checklist for KS 1479.500

  • Confirm the free panel area: 717 x 950 mm must hold every device plus wiring duct and spare room.
  • Check outdoor exposure against IP 56 and NEMA 12; add a canopy where direct sun or a hot wall is expected.
  • Match the lock: a 3-point lock system with a single 3 mm double-bit insert; plan the key or insert type with the site rules.
  • Plan cable entry: the number and size of cable glands and where they will be drilled. Seal every cut-out to the same IP class.
  • Compare dissipated power with the shell surface; a cooling or ventilation accessory may be needed above a few hundred watts in hot rooms.
  • Check wall strength and fixing method for a net weight of 38 kg plus the installed equipment.

For KS 1479.500 the outer volume of about 240000 litres and the 717 x 950 mm plate should hold your devices with roughly a third of the plate left free for wiring ducts and later additions. If the free area drops below that, step up to the next size in the table further down.

Installation, commissioning and maintenance of KS 1479.500

  • Unpack and inspect the door seal and paint before mounting; report transport damage at once.
  • Fix the enclosure to a flat surface with the mounting hardware so the shell is not twisted, because a twisted body lets the door seal leak.
  • Drill cable entries in the gland plate or the sides only after layout is final, and deburr and seal each opening.
  • Bond the door and mounting plate to protective earth with proper straps, following local electrical rules.
  • During commissioning, close the door fully and check that the seal is evenly compressed; a gap shows as a light line along the edge.
  • In service, inspect the seal, hinges and lock once or twice a year, and clean the surface with a mild detergent. Avoid solvents that attack plastic.

Record the key or insert type and keep a spare set with the maintenance team; a lost key on a sealed panel usually means cutting the lock.

Typical applications of KS 1479.500 in Oman and the GCC

Typical places are water and wastewater control cabinets, corrosion-prone chemical rooms and coastal control stations where visible status lights save door openings. At 38 kg net weight, fixing must be strong.

Large enclosures need planning for transport, lifting and the route through doors and stairwells; confirm the access path to the final position before the order is placed.

KS family sizes near KS 1479.500

KS 1479.500 belongs to a graded series in which width, height, depth and the lock layout change step by step. The neighbouring articles in the table below show how this body compares in size, so you can check whether a smaller or a deeper box would still fit your equipment.

Article W x H x D (mm) Doors Note
KS 1444.500 400 x 400 x 200 1 standard
KS 1448.500 400 x 400 x 200 1 window
KS 1466.500 600 x 600 x 200 1 standard
KS 1453.500 500 x 500 x 300 1 standard
KS 1479.500 800 x 1000 x 300 1 this item
KS 1400.500 1000 x 1000 x 300 1 standard

Sizes shown are taken from the manufacturer catalogue pages; other sizes, colours and accessories exist, so ask if your layout needs something different.

Information to send with an RFQ for KS 1479.500

A short enquiry saves a round of questions. Please include:

  • Exact article number KS 1479.500 and the quantity.
  • Installation site: indoor or outdoor, sun exposure, wall or pillar, coastal or inland.
  • Equipment to be mounted and its total dissipated power in watts.
  • Cable entry plan: number, size and side of glands.
  • Lock and key requirement, plus any padlock or handle upgrade.
  • Approvals or inspection documents your project requires.
  • Delivery location in Oman or the GCC and the date needed.

Documents and quotation

A technical details document for KS 1479.500 is attached on this page; it carries the dimension drawing and is valid for the whole size range shown there, so cross-check the article number printed on it.

Send the part number KS 1479.500 and the quantity to Seven Star LLC and we will confirm availability, lead time and delivery to your site in Oman or the GCC.

Other Models in the Rittal Ks Plastic Range

Seven Star LLC supplies models from the Rittal Ks Plastic range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Rittal KS 1432.500 Plastic Enclosure 250 x 350 x 150 mmSwitchgear, Enclosures & DistributionView details
Rittal KS 1444.500 Plastic Enclosure 400 x 400 x 200 mmSwitchgear, Enclosures & DistributionView details
Rittal KS 1453.500 Plastic Enclosure 500 x 500 x 300 mmSwitchgear, Enclosures & DistributionView details
Rittal KS 1466.500 Plastic Enclosure 600 x 600 x 200 mmSwitchgear, Enclosures & DistributionView details
Rittal KS 1479.500 Plastic Enclosure Window 800 x 1000 x 300Switchgear, Enclosures & DistributionYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Rittal KS 1479.500 Technical Details Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Rittal is a German manufacturer of enclosures, power distribution, climate control and IT infrastructure, founded in 1961 by Rudolf Loh in Rittershausen, Hesse, as Rudolf Loh Elektrogerätebau. In its first year it launched the first standard enclosure, built in series and available from stock instead of made to order. Rittal is headquartered in Herborn and belongs to the family-owned Friedhelm Loh Group.

Seven Star LLC is an independent supplier in Muscat. We list Rittal enclosures, cooling units and power distribution products for panel builders and maintenance teams in Oman and the GCC.

Rittal company profile

Founded 1961, Rittershausen (Dietzhölztal), Germany, by Rudolf Loh
Headquarters Herborn, Hesse, Germany
Ownership Friedhelm Loh Group (Loh family); sister companies include Eplan and Cideon
Idea Standard enclosures in series production, available from stock
Product families VX25 and AX/KX enclosures, TS 8 baying systems, Blue e+ cooling units and fan-and-filter units, RiLine busbar systems, IT racks and data centre modules

Milestones

  • 1961: Rudolf Loh founds the company and launches the first standard enclosure.
  • 1969: The company takes the Rittal name, according to Rittal.
  • 2021: Rittal marks 60 years.

Rittal product series

Enclosures include the TS 8 free-standing bayable system, AE compact enclosures such as the AE 1380.500 and AE 1034.500, and the CS outdoor wall-mounted enclosure. For hazardous areas there are the KEL 9404.600 stainless steel and AX 9206.100 plastic Ex enclosures. Power distribution is covered by the VX25 Ri4Power switchgear system and its 185 mm busbar system.

Climate control includes Blue e+ wall-mounted cooling units, the TopTherm Blue e SK 3273.500 roof-mounted unit and the LCP Inline CW liquid cooling package for IT racks.

Where Rittal products are used

Machine and process control panels, motor control and power distribution switchboards, outdoor telecom and utility cabinets, junction boxes in hazardous areas and IT racks. In the Gulf, cabinet cooling is often the deciding factor for reliable electronics.

Rittal products we list

Family Examples
Automation Accessories AE 1034.500 Compact Enclosure 300 x 400…, AE 1380.500 Compact Enclosure 380 x 380…, AX 9206.100 Ex Plastic Enclosure 600 x 6…, CS 9791.015 Outdoor Wall-Mounted Enclosure, KEL 9404.600 Ex Stainless Steel Enclosur…, VX25 Ri4Power 185 mm Busbar System, VX25 Ri4Power Switchgear and Power Distr…
Enclosure Climate Control Blue e+ Wall-Mounted Enclosure Cooling U…
Cooling SK 3273.500 TopTherm Blue e Roof-Mounted…
Switchgear, Enclosures & Distribution TS 8 Free-Standing Enclosure System

Ordering Rittal products: what we need

Rittal parts are ordered by a seven-digit model number such as 9404.600. Send that number, or the width, height and depth, material, protection category and door arrangement. For cooling units add the cooling output, rated voltage and mounting cut-out of the unit being replaced; for Ex enclosures, the zone and marking required.

Facts checked against Rittal's own company pages and Friedhelm Loh Group material, October 2026.

FAQ

Questions about the Rittal KS 1479.500 Plastic Enclosure Window 800 x

Answers from our engineering team on installation, compatibility and integration.

01What is the Rittal KS 1479.500?
It is a single-door wall-mounted enclosure in fibreglass-reinforced unsaturated polyester, 800 x 1000 x 300 mm, supplied with a mounting plate and a 3-point lock system. The net weight is 38 kg.
02What protection ratings does KS 1479.500 have?
The article page lists IP 56 to IEC 60529, NEMA 12 and IK08 impact protection. Check the ratings against the installation site, because a rating applies only while every cut-out is sealed.
03How large is the mounting plate of KS 1479.500?
The plate measures 717 x 950 mm and is 3 mm thick. The outer volume of the enclosure is about 240000 litres, and the free depth behind the plate is smaller than 300 mm.
04Is KS 1479.500 suitable for sunlight and outdoor use?
The shell does not rust and is rated IP 56. The manufacturer notes that long-term UV, wind and rain can fade the surface without affecting protection, and recommends PUR paint if the box cannot be shaded.
05Does Seven Star LLC provide a document for KS 1479.500?
Yes, a technical details document with the dimension drawing is attached on this page. Send the part number KS 1479.500 and the quantity to Seven Star LLC for availability and lead time in Oman and the GCC.