- Automation & ControlView all 2,467 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Rittal
Rittal HD 1670.600 Stainless Terminal Box 150 x 150 x 80 mm
Description
HD 1670.600 stainless steel terminal box 150 x 150 x 80 mm decoded
The Rittal HD 1670.600 is a small terminal box made of brushed stainless steel 1.4301 (AISI 304), 150 x 150 mm on the front with a depth of 80 mm. It comes with a cover, a blue silicone seal and a pre-assembled mounting bracket, and is used wherever a few cables must be joined in a sealed, wash-down capable housing. Seven Star LLC supplies HD 1670.600 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.
The table decodes HD 1670.600 so the identifiers on a drawing can be matched with the product.
| Element | Value | Meaning |
|---|---|---|
| HD | Product family prefix | Terminal box series in stainless steel |
| HD 1670.600 | Article number | Fixes the 150 x 150 x 80 mm size and the 1.4301 material |
| 150 x 150 x 80 mm | Front width x height x depth | The rear of the box is wider at 172 x 172 mm |
| Stainless steel 1.4301 | Shell material | AISI 304, 1.5 mm thick, brushed grain 400 |
| Cover and silicone seal | Closure | Blue silicone seal, supplied loose with a screw plug |
HD 1670.600 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Rittal / HD 1670.600 |
| Product description | HD terminal box, W x H x D: 150 x 150 x 80 mm, stainless steel 1.4301, with cover and silicone seal |
| Enclosure and cover material | Stainless steel 1.4301 (AISI 304), 1.5 mm |
| Mounting bracket | Sheet steel, zinc-plated, passivated, 2.0 mm |
| Screw plug | Stainless steel |
| Seal | Silicone, compliant with FDA guideline 21 CFR 177.2600, blue (RAL 5010) |
| Surface | Brushed, grain 400, peak-to-valley height below 0.8 µm |
| Dimensions, front (W x H) | 150 x 150 mm |
| Dimensions, rear (W x H) | 172 x 172 mm |
| Depth | 80 mm |
| IP rating (IEC 60529) | IP 66 and IP X9 |
| NEMA types | 1, 3, 3X, 4, 4X, 12, 13 |
| Type rating (UL 508A) | Type 1, 3, 3X, 4, 4X, 12, 13 |
| Impact protection | IK08 (5 J) |
| Net / gross weight | 1.6 kg / 1.72 kg |
| Approvals listed on the article page | UL + C-UL (listed) |
These are the values printed for HD 1670.600 on the manufacturer article page. Terminal blocks, glands and the electrical rating of the contents are not part of the delivery and must be chosen by the user.
How the HD 1670.600 terminal box is built
The one-piece box is formed from 1.5 mm brushed stainless steel with a mounting bracket that is already fixed to the rear, so installation starts with screw fixing on a flat surface. The cover closes against a blue silicone seal; the seal is blue (RAL 5010) and complies with FDA guideline 21 CFR 177.2600. The seal and a stainless screw plug are packed loose and fitted by the user, which keeps the box flat for shipping and lets the installer decide where the plug goes.
The compact shape and smooth brushed surface leave few places where dirt can lodge, which helps with cleaning in wet areas. The rear is wider than the front at 172 x 172 mm because of the bracket and the box flange, so allow for this when marking a mounting position.
Protection ratings of HD 1670.600
HD 1670.600 is listed with IP 66 and IP X9 under IEC 60529: dust-tight, resistant to powerful water jets and, through IP X9, to high-pressure and high-temperature spray. The article page also lists NEMA types 1, 3, 3X, 4, 4X, 12 and 13, with the same list given as UL 508A type ratings, which makes the box usable for both indoor and outdoor installations built to North American practice. Impact protection is IK08, equal to 5 joules. The approvals listed on the page are UL + C-UL (listed); ask for the matching certificate if the project requires it.
Space and layout inside HD 1670.600
The inner space is small, so the box is intended for terminals, a few connectors or a splice point rather than for active devices. Count the conductors, the terminal block size and the cable bending radius before ordering, and remember that cable glands must be compatible with the wall thickness and the specified IP rating. At 1.6 kg net the empty box can be fixed with a few screws, but the cables and glands add weight and leverage to the fixings.
When more space is needed, a larger enclosure from the compact range is a better choice than trying to squeeze devices into this box. Heat is also a limit: with no ventilation and a stainless wall, even a small power supply will warm the interior noticeably in a hot area.
Selection and ordering checklist for HD 1670.600
- Number and size of cables, and the glands they need; every opening must be sealed to the same IP class.
- Terminal block or connector type, and whether it fits the 80 mm depth.
- Environment: wash-down with high-pressure hot water, chemicals, outdoor sun or only indoor dust.
- Mounting surface: flat wall, frame or machine panel, with fixing method for the bracket.
- Required approvals or certificates, such as the UL listing.
- Quantity and whether matching glands or terminals should be quoted together.
Installation, commissioning and maintenance of HD 1670.600
- Check the bracket is firmly attached and the surface where it will be mounted is flat.
- Drill gland holes in the box before fixing it to the wall, deburr them and fit glands with their seals.
- Place the silicone seal in the groove, fit the screw plug where required and tighten the cover evenly.
- Test the closed box for tightness by visual check; any gap in the seal means the cover needs refitting.
- In service, clean with a mild detergent suited to stainless steel and rinse; inspect the seal during each shutdown and replace it if it is hard, cut or flattened.
Typical applications of HD 1670.600 in Oman and the GCC
A stainless terminal box with IP X9 protection suits food and beverage plants, dairies, water bottling lines and pharmaceutical areas that are cleaned with hot, high-pressure water. In the Gulf it is also used on desalination plants, seafront pump stations, chemical dosing skids and outdoor equipment close to the sea, where painted steel boxes corrode quickly in salt air.
It is common as a junction point for sensors, valve position switches and small actuators on skids and machines, and as a splice box where cables from different directions meet on a process line.
Where HD 1670.600 sits in the range
HD 1670.600 is the smallest stainless steel box described on this site. For bigger wiring or device space, stainless compact enclosures such as AE 1006.500 (380 x 380 x 210 mm) or AE 1010.500 (600 x 600 x 210 mm) in 1.4404 material are the next options, and plastic KS enclosures cover corrosion duty where weight matters.
Information to send with an RFQ for HD 1670.600
Please include the following with your enquiry:
- Exact article number HD 1670.600 and the quantity.
- Cable sizes, number of cores and the glands needed.
- Cleaning method: pressure, temperature, chemicals.
- Indoor or outdoor installation and the site conditions.
- Approval or certificate requirements.
- Delivery location in Oman or the GCC and the date needed.
Documents and quotation
A technical details document for HD 1670.600 is attached on this page with the dimension drawing; check the article number printed on it.
Send the part number HD 1670.600 and the quantity to Seven Star LLC and we will confirm availability, lead time and delivery to your site in Oman or the GCC.
Datasheets & Documents
- Datasheet Rittal HD 1670.600 Technical Details Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Rittal is a German manufacturer of enclosures, power distribution, climate control and IT infrastructure, founded in 1961 by Rudolf Loh in Rittershausen, Hesse, as Rudolf Loh Elektrogerätebau. In its first year it launched the first standard enclosure, built in series and available from stock instead of made to order. Rittal is headquartered in Herborn and belongs to the family-owned Friedhelm Loh Group.
Seven Star LLC is an independent supplier in Muscat. We list Rittal enclosures, cooling units and power distribution products for panel builders and maintenance teams in Oman and the GCC.
Rittal company profile
| Founded | 1961, Rittershausen (Dietzhölztal), Germany, by Rudolf Loh |
|---|---|
| Headquarters | Herborn, Hesse, Germany |
| Ownership | Friedhelm Loh Group (Loh family); sister companies include Eplan and Cideon |
| Idea | Standard enclosures in series production, available from stock |
| Product families | VX25 and AX/KX enclosures, TS 8 baying systems, Blue e+ cooling units and fan-and-filter units, RiLine busbar systems, IT racks and data centre modules |
Milestones
- 1961: Rudolf Loh founds the company and launches the first standard enclosure.
- 1969: The company takes the Rittal name, according to Rittal.
- 2021: Rittal marks 60 years.
Rittal product series
Enclosures include the TS 8 free-standing bayable system, AE compact enclosures such as the AE 1380.500 and AE 1034.500, and the CS outdoor wall-mounted enclosure. For hazardous areas there are the KEL 9404.600 stainless steel and AX 9206.100 plastic Ex enclosures. Power distribution is covered by the VX25 Ri4Power switchgear system and its 185 mm busbar system.
Climate control includes Blue e+ wall-mounted cooling units, the TopTherm Blue e SK 3273.500 roof-mounted unit and the LCP Inline CW liquid cooling package for IT racks.
Where Rittal products are used
Machine and process control panels, motor control and power distribution switchboards, outdoor telecom and utility cabinets, junction boxes in hazardous areas and IT racks. In the Gulf, cabinet cooling is often the deciding factor for reliable electronics.
Rittal products we list
Ordering Rittal products: what we need
Rittal parts are ordered by a seven-digit model number such as 9404.600. Send that number, or the width, height and depth, material, protection category and door arrangement. For cooling units add the cooling output, rated voltage and mounting cut-out of the unit being replaced; for Ex enclosures, the zone and marking required.
Facts checked against Rittal's own company pages and Friedhelm Loh Group material, October 2026.
Browse Rittal products by category: Automation Accessories, Switchgear, Enclosures & Distribution, Enclosure Climate Control.
FAQ
Questions about the Rittal HD 1670.600 Stainless Terminal Box 150 x 150
Answers from our engineering team on installation, compatibility and integration.
01What is the Rittal HD 1670.600?
It is a small stainless steel 1.4301 terminal box, 150 x 150 x 80 mm at the front, with a cover, silicone seal and pre-assembled mounting bracket. It weighs 1.6 kg net.
02What protection ratings does HD 1670.600 have?
The page lists IP 66 and IP X9, impact protection IK08, NEMA types 1, 3, 3X, 4, 4X, 12 and 13, and UL + C-UL (listed) approval. IP X9 covers high-pressure, high-temperature spray.
03What is the seal on HD 1670.600 made of?
It is a blue silicone seal (RAL 5010) that complies with FDA guideline 21 CFR 177.2600. The seal and the stainless screw plug are supplied loose and are fitted by the installer.
04Is HD 1670.600 large enough for devices?
The box is intended for terminals and connections, not for active devices. For more room choose a larger compact enclosure, and always count conductors, glands and bending radius before ordering.
05Does Seven Star LLC provide a document for HD 1670.600?
Yes, a technical details document is attached on this page. Send the part number HD 1670.600 and the quantity to Seven Star LLC for availability and lead time in Oman and the GCC.


















Reviews
There are no reviews yet.