Brand:

Rittal AE 1010.500 Stainless Steel Enclosure 600 x 600 x 210 mm

Description

AE 1010.500 stainless steel compact enclosure 600 x 600 x 210 mm decoded

The Rittal AE 1010.500 is a single-door, wall-mounted stainless steel compact enclosure in stainless steel 1.4404 (AISI 316L), 600 x 600 x 210 mm (W x H x D), supplied complete with a mounting plate. The 600 x 600 x 210 mm stainless steel 1.4404 body is a mid-sized, corrosion-resistant control housing with two locks. Seven Star LLC supplies AE 1010.500 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

The table decodes AE 1010.500 element by element, so a buyer can check it against a drawing or an enquiry.

Element Value Meaning
AE Product family Stainless steel version of the compact enclosure series for corrosive and hygienic duty
AE 1010.500 Article number Identifies the exact size, material and lock arrangement in the manufacturer catalogue
600 x 600 x 210 mm Outer dimensions Width x height x depth of the enclosure body
Stainless steel 1.4404 (aisi 316l) Shell material Applies to body and door; the mounting plate is zinc-plated sheet steel
1 door, cam Door and lock Lock arrangement: 2 cam locks with 3 mm double-bit inserts

AE 1010.500 technical specifications

Parameter Specification
Manufacturer / part number Rittal / AE 1010.500
Product description AE Compact enclosure, W x H x D: 600x600x210 mm, Stainless steel 1.4404, with mounting plate, single-door, with two cam locks
Dimensions (W x H x D) 600 x 600 x 210 mm
Material Stainless steel 1.4404 (aisi 316l)
Surface Brushed, grain 400, peak-to-valley height below 0.8 µm
Mounting plate (W x H) 549 x 570 mm
Doors / lock 1 / cam, 2 cam locks with 3 mm double-bit inserts
IP rating (IEC 60529) IP 66
NEMA type NEMA 4X
Impact protection IK08 (5 J)
Net / gross weight 22.325 kg / 23.5 kg
Approvals listed on the article page DNV, UL + C-UL (listed)

All values are those printed for article AE 1010.500 on the manufacturer product page. Colour, plate sizes and weights are nominal catalogue figures, so confirm them against the technical drawing before cutting any panel.

How the AE 1010.500 enclosure is built

The body and the door are brushed stainless steel 1.4404, also known as AISI 316L, with a grain-400 finish and a peak-to-valley height below 0.8 µm. This molybdenum-alloyed grade is the one chosen when chlorides, cleaning agents or salt-laden air would attack ordinary 1.4301 material. A polyurethane seal is foamed in all round the door, the mounting plate is zinc-plated sheet steel, and the lock insert is a 3 mm double-bit type.

At 22.325 kg net (23.5 kg packed), AE 1010.500 is a two-person lift, so plan how the box will be raised and held while it is fixed. The shell geometry, the door seal and the lock are those of its series, so spare seals and locks follow the family part lists rather than a one-off design.

Protection ratings of AE 1010.500

AE 1010.500 carries IP 66 to IEC 60529, meaning the enclosure is dust-tight and protected against powerful water jets. The article page lists the equivalent NEMA type as NEMA 4X, the type that adds corrosion resistance to the water and dust protection of NEMA 4. Mechanical impact protection is IK08, equal to 5 joules of impact energy under IEC 62262. The article page lists these approvals for this article: DNV, UL + C-UL (listed). Check the certificate that matches your project before you rely on a marine or listed rating, because approvals are tied to the article number and the configuration.

Internal space and mounting layout of AE 1010.500

The enclosure has an outer volume of roughly 75600 litres. The mounting plate measures 549 x 570 mm, which gives about 0.31 m² of panel for DIN rail, terminals, contactors and drives. The door and body walls take space too, so the usable clearance behind the door is smaller than the 210 mm outer depth suggests; keep a margin for cable bend radius and for components that stand proud of the rail.

A 549 x 570 mm plate gives enough room for a small drive, PLC and terminals. Keep the layout simple, because the shallow depth restricts tall components and the stainless shell reflects less heat than aluminium or painted steel under direct sun.

Selection and ordering checklist for AE 1010.500

  • Confirm the free panel area: 549 x 570 mm must hold every device plus wiring duct and spare room.
  • Check outdoor exposure against IP 66 and NEMA 4X; add a canopy where direct sun or a hot wall is expected.
  • Match the lock: 2 cam locks with 3 mm double-bit inserts; plan the key or insert type with the site rules.
  • Plan cable entry: the number and size of cable glands and where they will be drilled. Seal every cut-out to the same IP class.
  • Compare dissipated power with the shell surface; a cooling or ventilation accessory may be needed above a few hundred watts in hot rooms.
  • Check wall strength and fixing method for a net weight of 22.325 kg plus the installed equipment.

For AE 1010.500 the outer volume of about 75600 litres and the 549 x 570 mm plate should hold your devices with roughly a third of the plate left free for wiring ducts and later additions. If the free area drops below that, step up to the next size in the table further down.

Installation, commissioning and maintenance of AE 1010.500

  • Unpack and inspect the door seal and paint before mounting; report transport damage at once.
  • Fix the enclosure to a flat surface with the mounting hardware so the shell is not twisted, because a twisted body lets the door seal leak.
  • Drill cable entries in the gland plate only after layout is final, and deburr and seal each opening.
  • Bond the door and mounting plate to protective earth with proper straps, following local electrical rules.
  • During commissioning, close the door fully and check that the seal is evenly compressed; a gap shows as a light line along the edge.
  • In service, inspect the seal, hinges and lock once or twice a year, and clean the surface with a mild detergent. Use cleaners suitable for stainless steel and rinse away chlorides.

Record the key or insert type and keep a spare set with the maintenance team; a lost key on a sealed panel usually means cutting the lock.

Typical applications of AE 1010.500 in Oman and the GCC

It is used on coastal pump stations, seawater intake panels, wash-down areas in food plants and chemical storage areas. Two stainless locks are fitted to keep closing force even across the door.

Large enclosures need planning for transport, lifting and the route through doors and stairwells; confirm the access path to the final position before the order is placed.

AE family sizes near AE 1010.500

AE 1010.500 belongs to a graded series in which width, height, depth and the lock layout change step by step. The neighbouring articles in the table below show how this body compares in size, so you can check whether a smaller or a deeper box would still fit your equipment.

Article W x H x D (mm) Doors Note
AE 1002.600 200 x 300 x 155 1 stainless steel 1.4301
AE 1005.500 300 x 380 x 210 1 stainless steel 1.4404
AE 1006.500 380 x 380 x 210 1 stainless steel 1.4404
AE 1010.500 600 x 600 x 210 1 this item
AE 1019.500 1000 x 1200 x 300 2 stainless steel 1.4404
AE 1019.600 1000 x 1200 x 300 2 stainless steel 1.4301

Sizes shown are taken from the manufacturer catalogue pages; other sizes, colours and accessories exist, so ask if your layout needs something different.

Information to send with an RFQ for AE 1010.500

A short enquiry saves a round of questions. Please include:

  • Exact article number AE 1010.500 and the quantity.
  • Installation site: indoor or outdoor, sun exposure, wall or pillar, coastal or inland.
  • Equipment to be mounted and its total dissipated power in watts.
  • Cable entry plan: number, size and side of glands.
  • Lock and key requirement, plus any padlock or handle upgrade.
  • Approvals or inspection documents your project requires.
  • Delivery location in Oman or the GCC and the date needed.

Documents and quotation

A technical details document for AE 1010.500 is attached on this page; it carries the dimension drawing and is valid for the whole size range shown there, so cross-check the article number printed on it.

Send the part number AE 1010.500 and the quantity to Seven Star LLC and we will confirm availability, lead time and delivery to your site in Oman or the GCC.

Other Models in the Rittal Ae Stainless Range

Seven Star LLC supplies models from the Rittal Ae Stainless range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Rittal AE 1006.500 Stainless Steel Enclosure 380 x 380 x 210 mmSwitchgear, Enclosures & DistributionView details
Rittal AE 1010.500 Stainless Steel Enclosure 600 x 600 x 210 mmSwitchgear, Enclosures & DistributionYou are viewing this model
Rittal AE 1019.500 Stainless 2-Door Enclosure 1000x1200x300 mmSwitchgear, Enclosures & DistributionView details
Datasheets & Documents
  • PDF Datasheet Rittal AE 1010.500 Technical Details Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Rittal is a German manufacturer of enclosures, power distribution, climate control and IT infrastructure, founded in 1961 by Rudolf Loh in Rittershausen, Hesse, as Rudolf Loh Elektrogerätebau. In its first year it launched the first standard enclosure, built in series and available from stock instead of made to order. Rittal is headquartered in Herborn and belongs to the family-owned Friedhelm Loh Group.

Seven Star LLC is an independent supplier in Muscat. We list Rittal enclosures, cooling units and power distribution products for panel builders and maintenance teams in Oman and the GCC.

Rittal company profile

Founded 1961, Rittershausen (Dietzhölztal), Germany, by Rudolf Loh
Headquarters Herborn, Hesse, Germany
Ownership Friedhelm Loh Group (Loh family); sister companies include Eplan and Cideon
Idea Standard enclosures in series production, available from stock
Product families VX25 and AX/KX enclosures, TS 8 baying systems, Blue e+ cooling units and fan-and-filter units, RiLine busbar systems, IT racks and data centre modules

Milestones

  • 1961: Rudolf Loh founds the company and launches the first standard enclosure.
  • 1969: The company takes the Rittal name, according to Rittal.
  • 2021: Rittal marks 60 years.

Rittal product series

Enclosures include the TS 8 free-standing bayable system, AE compact enclosures such as the AE 1380.500 and AE 1034.500, and the CS outdoor wall-mounted enclosure. For hazardous areas there are the KEL 9404.600 stainless steel and AX 9206.100 plastic Ex enclosures. Power distribution is covered by the VX25 Ri4Power switchgear system and its 185 mm busbar system.

Climate control includes Blue e+ wall-mounted cooling units, the TopTherm Blue e SK 3273.500 roof-mounted unit and the LCP Inline CW liquid cooling package for IT racks.

Where Rittal products are used

Machine and process control panels, motor control and power distribution switchboards, outdoor telecom and utility cabinets, junction boxes in hazardous areas and IT racks. In the Gulf, cabinet cooling is often the deciding factor for reliable electronics.

Rittal products we list

Family Examples
Automation Accessories AE 1034.500 Compact Enclosure 300 x 400…, AE 1380.500 Compact Enclosure 380 x 380…, AX 9206.100 Ex Plastic Enclosure 600 x 6…, CS 9791.015 Outdoor Wall-Mounted Enclosure, KEL 9404.600 Ex Stainless Steel Enclosur…, VX25 Ri4Power 185 mm Busbar System, VX25 Ri4Power Switchgear and Power Distr…
Enclosure Climate Control Blue e+ Wall-Mounted Enclosure Cooling U…
Cooling SK 3273.500 TopTherm Blue e Roof-Mounted…
Switchgear, Enclosures & Distribution TS 8 Free-Standing Enclosure System

Ordering Rittal products: what we need

Rittal parts are ordered by a seven-digit model number such as 9404.600. Send that number, or the width, height and depth, material, protection category and door arrangement. For cooling units add the cooling output, rated voltage and mounting cut-out of the unit being replaced; for Ex enclosures, the zone and marking required.

Facts checked against Rittal's own company pages and Friedhelm Loh Group material, October 2026.

FAQ

Questions about the Rittal AE 1010.500 Stainless Steel Enclosure 600 x

Answers from our engineering team on installation, compatibility and integration.

01What is the Rittal AE 1010.500?
It is a single-door wall-mounted enclosure in stainless steel 1.4404 (AISI 316L), 600 x 600 x 210 mm, supplied with a mounting plate and 2 cam locks. The net weight is 22.325 kg.
02What protection ratings does AE 1010.500 have?
The article page lists IP 66 to IEC 60529, NEMA 4X and IK08 impact protection. Check the ratings against the installation site, because a rating applies only while every cut-out is sealed.
03How large is the mounting plate of AE 1010.500?
The plate measures 549 x 570 mm. The outer volume of the enclosure is about 75600 litres, and the free depth behind the plate is smaller than 210 mm.
04Which stainless grade is AE 1010.500 made from?
The body and door are stainless steel 1.4404, which corresponds to AISI 316L, with a brushed grain-400 surface. This grade resists chlorides better than 1.4301, so it suits coastal and washdown sites.
05Does Seven Star LLC provide a document for AE 1010.500?
Yes, a technical details document with the dimension drawing is attached on this page. Send the part number AE 1010.500 and the quantity to Seven Star LLC for availability and lead time in Oman and the GCC.