Brand:

Rigol DG1022Z 25 MHz 2-Channel Function/Arbitrary Generator

Description

A 25 MHz two-channel generator with 14-bit arbitrary output and LAN

The Rigol DG1022Z is the entry model of the DG1000Z function/arbitrary waveform generator series, with two full-function independent channels, 25 MHz maximum sine frequency and 200 MSa/s sampling at 14 bits. RIGOL describes the series as combining a function generator, arbitrary waveform generator, noise generator, pulse generator, harmonics generator, analog/digital modulator and counter in one instrument.

Its phase noise (below -125 dBc/Hz at 10 MHz, 10 kHz offset, typical) and 200 ps jitter make it a low-noise bench source for teaching labs, sensor-interface development and production test. More instruments are in Portable Test & Measurement.

Datasheet highlights

  • SiFi (Signal Fidelity) arbitrary waveform replication; 2 Mpts per channel standard, 16 Mpts optional.
  • Frequency stability +/-1 ppm; built-in 8th-order harmonic generator.
  • Seven-digit, 200 MHz frequency counter; 160 pre-edited waveforms.
  • Full modulation set: AM, FM, PM, ASK, FSK, PSK and PWM; LXI Core 2011 compliant.

Technical specification

Waveforms and frequency

Parameter Specification
Order code DG1022Z (DG1032Z is 30 MHz, DG1062Z is 60 MHz)
Channels / sample rate / resolution 2 / 200 MSa/s / 14 bits
Sine 1 uHz to 25 MHz
Square 1 uHz to 25 MHz
Ramp / pulse 1 uHz to 500 kHz / 1 uHz to 15 MHz
Harmonic / arbitrary 1 uHz to 10 MHz each
Noise 25 MHz bandwidth (-3 dB)
Arbitrary length 2 Mpts standard; 16 Mpts with Arb16M-DG1000Z
Accuracy / resolution +/-1 ppm / 1 uHz
Harmonic distortion (typical, 0 dBm) Below -65 dBc to 10 MHz; below -55 dBc to 30 MHz; THD below 0.075 % (10 Hz to 20 kHz)
Spurious (typical) Below -70 dBc to 10 MHz
Square edges / duty Rise/fall under 10 ns; overshoot 5 % or less; duty 0.01 to 99.99 %
Pulse Width 16 ns upward; edges 10 ns or more; overshoot 5 % or less
Jitter (rms, typical) 2 ppm + 200 ps to 5 MHz; 200 ps above

Output, modulation and counter

Parameter Specification
Amplitude into 50 Ohm 1 mVpp to 10 Vpp to 10 MHz; 5 Vpp to 30 MHz; accuracy 1 % + 1 mV
Flatness (sine, 2.5 Vpp) +/-0.1 dB to 10 MHz
Offset +/-5 V peak ac+dc into 50 Ohm; accuracy 1 % + 5 mV + 0.5 % of amplitude
Output impedance / protection 50 Ohm / short-circuit protection and overvoltage protection
Modulation AM 0 to 120 %, FM, PM, ASK, FSK, PSK, PWM; 2 mHz to 1 MHz; internal or external
Sweep / burst Linear, log, step; 1 ms to 500 s / 1 to 1,000,000 cycles, infinite, gated
Counter 1 uHz to 200 MHz; 7 digits/s
Phase offset 0 to 360 deg; 0.03 deg

General

Parameter Specification
Display 3.5 inch TFT, 320 x 240
Interfaces USB Host, USB Device, LAN
Power 100 to 240 V, 45 to 440 Hz; under 40 W; fuse 250 V T3.15 A
Size / weight 261.5 x 112 x 318.4 mm / 3.2 kg (4.5 kg packed)
Environment 0 to 50 degC; below 3,000 m; fan cooled; IP2X
Calibration 1 year recommended

Choosing within the DG1000Z series

All three models have two channels: DG1022Z (25 MHz), DG1032Z (30 MHz) and DG1062Z (60 MHz). The 1032Z and 1062Z come with 8 Mpts arbitrary memory against 2 Mpts on the DG1022Z. For a generator with 16-bit resolution and a touch screen, compare the DG800 series such as the Rigol DG832.

Setup notes

The datasheet requires that the generator be within its calibration period, self-calibrated, and running continuously for at least 30 minutes at 18 to 28 degC for the guaranteed specs. Output protection disables the waveform output automatically when overloaded. Standard accessories are a power cord, USB cable, BNC cable, quick guide and resource CD.

In practice the trade-offs against the DG800 family are clear from the two datasheets: the DG1022Z samples at 200 MSa/s with 14-bit resolution and a 3.5 inch 320 x 240 display, while the DG800 units use 125 MSa/s with 16 bits and a 4.3 inch touch screen. The DG1022Z also adds an 8th-order harmonic generator and a 200 MHz counter, with a 100 to 240 V mains input under 40 W.

Where it is used

University and training labs, electronics repair and calibration workshops, and R&D groups for utilities and process-control hardware use it to feed sensor simulators, test filters and drive clock or pulse inputs. It is a 0 to 50 degC bench instrument, so use an air-conditioned lab.

Options and accessories

Listed options: Arb16M-DG1000Z memory, RM-1-DG1000Z and RM-2-DG1000Z rack kits, RA5040K 40 dB attenuator, PA1011 10 W power amplifier and the USB-GPIB converter.

Selection and installation notes

Test and measurement instruments are selected from the accuracy, the range and the interfaces the work needs. Allow the warm-up time, use leads rated for the voltage and category of the circuit, keep the outputs and inputs inside the stated limits and keep the calibration current according to your quality system. Record the settings used for any test that must be repeated later.

Information needed for a quotation

Send the full model code, the quantity, the delivery location in Oman or the GCC, the intended use and any accessories needed, so that the complete package can be quoted together.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification and the site risk assessment before a purchase is confirmed. Ratings, standards and dimensions are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and building services projects.

Related Rigol products: Rigol DG832 35 MHz Dual-Channel Arbitrary Waveform Generator, Rigol DHO924S 250 MHz 4+16 Channel Oscilloscope with AFG, Rigol DS1104Z Plus 100 MHz 4-Channel Digital Oscilloscope, Rigol DHO814 100 MHz 4-Channel 12-bit Digital Oscilloscope, Rigol DSA815-TG 1.5 GHz Tracking Generator Spectrum Analyzer and Rigol MSO5354 350 MHz 4+16 Channel Mixed Signal Oscilloscope.

Documents and quotation

Download the RIGOL datasheet (DG1000Z datasheet, DSB09103-1110) from this page. Confirm order code, options and accessories in your RFQ; quotes are given on request only.

Datasheets & Documents
  • PDF Datasheet RIGOL DG1000Z series function/arbitrary waveform generator datasheet (DSB09103-1110) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

RIGOL Technologies is a Chinese maker of electronic test and measurement instruments, founded in 1998 when three university students set up the RIGOL studio in Beijing. Its first product, a virtual oscilloscope, followed in 1999. RIGOL is now headquartered in Suzhou, where it opened a new headquarters in 2020, and its shares have traded on the Shanghai STAR Market since April 2022.

Seven Star LLC is an independent supplier in Muscat. We list Rigol instruments with the official datasheet for workshops, laboratories and training centres in Oman and the GCC.

Rigol company profile

Founded 1998, Beijing, China
Headquarters Suzhou, China
Listing Shanghai Stock Exchange STAR Market (688337), since April 2022
First product RVO2100 virtual oscilloscope, 1999
Product families DS1000Z, DHO800 and MSO5000 digital oscilloscopes, DG800 and DG1000Z function generators, DP800 programmable power supplies, DM3058 digital multimeters, DSA800 spectrum analysers, electronic loads

Milestones

  • 1998: The RIGOL studio is set up in Beijing.
  • 1999: RIGOL releases its first virtual oscilloscope.
  • 2014: The Suzhou R&D and manufacturing base is completed.
  • 2022: RIGOL lists on the STAR Market.

Rigol product series

Oscilloscopes include the DS1104Z Plus 100 MHz four-channel scope, the DHO814 with 12-bit resolution, the DHO924S with 16 digital channels and built-in waveform generator and the MSO5354 350 MHz mixed signal oscilloscope.

Bench instruments include the DP811 programmable linear DC power supply (40 V, 10 A, 200 W), the DL3031A programmable DC electronic load (150 V, 60 A, 350 W), the DG832 and DG1022Z function and arbitrary waveform generators, the DSG830 3 GHz RF signal generator and the DSA815-TG 1.5 GHz spectrum analyzer with tracking generator.

Where Rigol instruments are used

Electronics repair workshops, university and training labs, calibration rooms and the development and maintenance of control boards, drives, power supplies and sensor interfaces for industrial plants.

Rigol products we list

Family Examples
Portable Test & Measurement DHO814 100 MHz 4-Channel 12-bit Digital…, DHO924S 250 MHz 4+16 Channel Oscilloscop…, DL3031A 150 V 60 A 350 W Programmable DC…, DP811 40 V 10 A 200 W Programmable Linea…, DS1104Z Plus 100 MHz 4-Channel Digital O…, DSA815-TG 1.5 GHz Tracking Generator Spe…, MSO5354 350 MHz 4+16 Channel Mixed Signa…

Ordering Rigol instruments: what we need

Send the model code and any software options or bandwidth upgrades, the probes and accessories required, the supply voltage and whether a calibration certificate is needed.

Facts checked against RIGOL's own milestone page (rigol.com), October 2026.

FAQ

Questions about the Rigol DG1022Z 25 MHz 2-Channel Function/Arbitrary

Answers from our engineering team on installation, compatibility and integration.

01How many channels does the DG1022Z have?
Two full-function independent channels.
02What is its maximum sine frequency?
25 MHz.
03How much arbitrary memory is included?
2 Mpts per channel as standard; 16 Mpts optional.
04Does it support LAN control?
Yes. USB Host, USB Device and LAN are standard, and it complies with LXI Core 2011.
05Is Seven Star LLC a RIGOL distributor?
No. We supply as an independent company in Muscat and have no distributor relationship with RIGOL.