Brand:

Parker PT4110QBPGG164 Tank Top Return Line Filter PT4, 10 um

Description

PT4110QBPGG164 tank top return line filter, PT4 size, 10 micron

The Parker PT4110QBPGG164 is a complete PT Series tank top mounted return line filter: an aluminium head with a screw-in, disposable Microglass III element, nitrile seals, a G1 port connection and a plugged indicator port. It uses the PT4 housing, length 1 element and the 10 micron media. The code ends in the diffuser option, so this version includes an airtight diffuser. The PT range is described by Parker as an economical tank top filter with a maximum pressure of 10 bar and a maximum flow of 400 l/min, and this configuration is listed with a flow capacity of 175 l/min.

Decoding the PT4110QBPGG164 part number

The Parker PT configurator builds the code from eight boxes. Read in that order, the code splits as shown below.

Box Code Meaning
1 Housing PT4 PT4 housing
2 Element length 1 Length 1
3 Media 10Q Microglass III, 10 micron
4 Seal B Nitrile
5 Indicator P Plugged port (no indicator fitted)
6 Bypass valve G 1.7 bar
7 Ports G16 G1
8 Options 4 Airtight diffuser

The interpretation matches the Parker product page for PT4110QBPGG164, which shows nitrile seals, a 1.7 bar bypass, G1 ports, a 10Q Microglass element, plugged ports and a diffuser.

Technical specifications of PT4110QBPGG164

Parameter Specification
Manufacturer / part number Parker PT4110QBPGG164
Series PT Series tank top mounted return line filter
Housing material Aluminium
Mounting Tank top, screw-in into a ported tank ring
Filter element 10Q Microglass III, disposable, in-to-out flow
Seal material Nitrile
Port connection G1
Bypass valve 1.7 bar
Maximum pressure 10 bar
Flow capacity (this configuration) 175 l/min
Operating temperature -20 to 100 °C
Indicator Ports plugged
Option With airtight diffuser
Fluids Mineral and HEES type fluids
Build-in length in tank 98 mm (PT4 length 1)

How the PT filter works

Oil returns from the system into the head and flows inside-out through the element. Because the dirt is caught on the inside of the media, it stays in the element while the cartridge is removed, and this reduces the chance of dirty oil dropping back into the tank at a change. The element is a single disposable unit that includes the nylon cover and the bypass valve in the bottom end cap, so a new cartridge brings fresh seals with it and the housing cover and seals do not have to be handled separately. The Parker brochure notes that all seals are pre-mounted, so there is no risk of an old seal being left in place. The filter head threads into a ported tank ring that is bolted to a steel reservoir.

Parker also notes that the same element can be screwed directly into a co-polymer reservoir, using a moulded cavity with an integrated return line port. That route is aimed at reservoir manufacturers; for a steel tank the ported ring and head shown here is the normal arrangement. The diffuser in this code helps to control the oil flow as it enters the tank.

Selecting a PT filter

  • Housing: PT2 serves lower flow and PT4 serves higher flow. PT4 takes G1 or G1¼ ports; PT2 takes G¾ or G1.
  • Length: lengths 1, 2 and 3 are offered for PT4 (build-in lengths of 98, 189 and 310 mm). Longer elements have more area and pass more flow.
  • Media: 2, 5, 10 or 20 micron. PT4110Q uses 10 micron.
  • Seals: nitrile or fluoroelastomer. This code is nitrile.
  • Indicator: plugged port, pressure switch (NO or NC, 1.2 bar setting) or pressure gauge. This code leaves the port plugged and an indicator can be added later.
  • Diffuser: code 1 for none or code 4 for an airtight diffuser.

Installation and element replacement

The head is threaded into the tank ring, with a 16 mm hex on the head and a tightening torque of 13 to 16 Nm shown on the brochure drawings for the PT2 body. Check the drawing for the PT4 before tightening. Leave the element removal clearance above the tank free so that the cartridge can be lifted out. To service the filter, stop the pump, relieve the system, unscrew the old unit and fit a new element. The spare element for PT4 length 1, 10 micron is 936744Q, and finer or coarser PT4 length 1 elements are 936742Q (2 micron), 936743Q (5 micron) and 936745Q (20 micron). Fit an indicator or gauge if you want a clear signal that the element is loaded, as the plugged port gives none.

Typical applications in Oman and the GCC

PT filters are intended for compact hydraulic power packs and tank mounted return lines. Parker lists lorry mounted cranes, agricultural equipment, grass cutting machines and container hook loaders as typical uses. In Oman and the GCC the same design suits truck mounted hydraulics, utility vehicles, small skids and workshop power units where dust and heat call for reliable return line filtration but the oil flow is moderate.

PT Series at a glance

Item PT2 PT4
Port options G¾, G1 G1, G1¼
Element lengths 1 and 2 in the ordering table 1, 2 and 3
Media 2, 5, 10, 20 micron Microglass III
Bypass 1.7 bar

Information to send with an RFQ

  • Part number PT4110QBPGG164 and the quantity.
  • Required flow and fluid type.
  • Whether a pressure switch or gauge is wanted in place of the plugged port.
  • Tank ring or mounting arrangement.
  • Delivery location in Oman or the GCC.

Storage, handling and spares for the Parker PT4110QBPGG164

Keep Parker PT4110QBPGG164 elements sealed in their original bags and boxes until installation. Store them flat or upright as marked on the carton, indoors, away from dust, moisture, solvents and direct sun. In hot warehouses in Oman and the GCC, check that seals and gaskets are not stored above the temperature limits given by the manufacturer.

  • Check the part number, micron rating and seal material on every element against the housing data plate before fitting.
  • Replace elements when the differential pressure indicator or the site maintenance schedule calls for it, not only when flow drops.
  • Fit new O-rings or gaskets with each element change where the instructions require it.
  • Keep at least one spare element for each housing in service, so that a change-out does not wait for a shipment.

When you send an RFQ for the Parker PT4110QBPGG164, list the housing model, required micron rating, media and quantity of spare elements, so the complete filtration scope can be quoted together.

Documents and quotation

The Parker PT Series brochure is attached on this page with the configurator and drawings.

Send the part number and your tank details and we will prepare a quotation. Seven Star LLC supplies hydraulic filters and spares in Oman and the GCC.

Datasheets & Documents
  • PDF Catalog Parker PT Series Tank Top Filter Brochure Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Parker Hannifin is an American manufacturer of motion and control technologies, founded in 1917 in Cleveland, Ohio, by Arthur L. Parker as the Parker Appliance Company. Its first product was a pneumatic brake system for trucks and buses. In 1957 the company bought Hannifin, a maker of hydraulic and pneumatic cylinders and valves, and took the Parker Hannifin name. It is headquartered in the Cleveland area and listed on the New York Stock Exchange.

Seven Star LLC supplies the Parker items that maintenance teams request most: Lucifer solenoid valves, including NAMUR types for actuated valves, along with filter elements and hydraulic gear pumps.

Parker company profile

Founded 1917, Cleveland, Ohio, USA, by Arthur L. Parker
Headquarters Cleveland area, Ohio, USA
Ownership Public company, New York Stock Exchange (PH), listed since 1964
First product Pneumatic brake system for trucks and buses
Product families Hydraulic pumps, cylinders and valves, pneumatic valves and FRLs, instrumentation fittings and valves, hoses and couplings, filtration (including Racor and Velcon), seals and O-rings

Milestones

  • 1917: Arthur L. Parker starts the Parker Appliance Company in Cleveland.
  • 1924: Parker restarts the business after a 1919 accident destroyed its inventory.
  • 1957: Parker acquires Hannifin and becomes Parker Hannifin.
  • 1964: The shares are listed on the New York Stock Exchange.

Parker product lines listed here

Most of the listing is Lucifer, the Parker solenoid valve line that many nameplates still show as a brand in its own right. The 341N types (341N01, 341N22, 341N31) are NAMUR-interface valves that bolt straight onto a pneumatic actuator to pilot it. The E131K03 is a direct-acting 3/2 valve, and the 322K4706 and 7341NAKBHNM0 are further Lucifer solenoid valves. Parker sells Lucifer valve bodies and their coils or electrical parts as separate items, so one body can be combined with different voltages and enclosure types.

Other Parker lines appear: a hydraulic gear pump (P51A478BEY25-07-ZY), a coalescing filter element (9000040001) and a Triple-Lok 37-degree flare tube fitting.

Where Parker components are used

Lucifer NAMUR valves sit on quarter-turn actuators for on-off and shutdown valves in oil and gas, power and water plants across the GCC. Line-mounted solenoid valves switch instrument air, water, steam and light oils on skids and machines. Gear pumps drive hydraulic power units and mobile equipment, and coalescing elements protect instrument air and gas sampling systems from oil and water aerosols.

Parker products we list

Family Examples
Solenoid Valves 7341NAKBHNM0 Lucifer Series Solenoid Valve, Lucifer 322K4706 2-Way Solenoid Valve, Lucifer 341N01 NAMUR Solenoid Valve, Lucifer 341N22 SOLENOID VALVE, Lucifer 341N31 NAMUR Solenoid Valve, Lucifer E131K03 Solenoid Valve
Filtration Elements 9000040001 Coalescing Filter Element
Pumps P51A478BEY25-07-ZY Hydraulic Gear Pump
Pipes & Fittings Triple-Lok 37° Flare Tube Fitting

Ordering Parker parts: what we need

Parker part numbers are long and every character counts. Please send:

  • Solenoid valves: valve number from the body, coil or electrical part number, voltage and frequency, and the Ex marking if the coil is certified
  • Gear pumps: the complete code from the nameplate, including the assembly number, which fixes displacement, shaft, ports and rotation
  • Filter elements: element number and the housing model it fits

A photo of the nameplate is welcome. We check the code against Parker documentation and identify the manufacturer's current equivalent if a number has been superseded.

Facts checked against Parker's centennial timeline and the Encyclopedia of Cleveland History, October 2026.

FAQ

Questions about the Parker PT4110QBPGG164 Tank Top Return Line Filter

Answers from our engineering team on installation, compatibility and integration.

01What does PT4110QBPGG164 mean?
It is the PT4 housing, length 1, 10 micron Microglass III media, nitrile seals, plugged indicator port, 1.7 bar bypass, G1 ports and an airtight diffuser, decoded from the Parker PT configurator.
02What is the maximum pressure and flow of the PT series?
The PT series is rated for up to 10 bar and up to 400 l/min in the brochure. The page for PT4110QBPGG164 lists a flow capacity of 175 l/min for this configuration.
03Which element fits the PT4110QBPGG164?
The spare element for PT4 length 1 with 10 micron media is 936744Q. It is a disposable cartridge that includes the cover and the 1.7 bar bypass valve.
04Can an indicator be added to this filter?
The indicator port is plugged on this version. The brochure lists a 1.2 bar visual gauge and normally open or normally closed pressure switches for the PT series.
05What operating temperature does it have?
The Parker page and brochure give -20 to 100 degrees C, with nitrile seals fitted on this version. It is intended for mineral oil and HEES type fluids.