Brand:

ifm VSE002 Vibration Diagnostic Electronics, Ethernet, DIN Rail

Description

ifm VSE002 Vibration Diagnostic Electronics, Ethernet, DIN Rail

The ifm VSE002 is diagnostic electronics for vibration sensors: a DIN rail unit that reads up to four sensors on the inputs S1 to S4, evaluates them and exposes the results over Ethernet (10/100 Mbit/s, RJ45, TCP/IP). It has two further inputs (IN1 and IN2), a switching output (OU1) and an analogue 4 to 20 mA output (OU2), and runs on 24 V DC with 200 mA current consumption.

A real-time clock and a ring memory with 881664 data records let the unit keep a history, at a minimum interval of one minute. Seven Star LLC supplies the VSE002 in Oman and the GCC as an independent supplier; quote VSE002 when you ask for an offer.

VSE002 technical specifications

The table lists the values published by the manufacturer for the VSE002. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / VSE002
Dimensions [mm] 114.2 x 25.4 x 105.5
Operating voltage [V] 24 DC (when using the IEPE input: 24 V + 20%; IEPE = Integrated Electronics Piezo Electric)
Current consumption [mA] 200 (24 V DC)
Max. load [Ω] 500
Communication interface Ethernet
Protocol TCP/IP
Ambient temperature [°C] 0 to 70
Protection IP 20
Weight [g] 323.1
Materials Housing: PA
Connector RJ45; Contacts: 4
MTTF [years] 101

How the VSE002 works

The VSE002 is an evaluation unit for vibration sensors on rotating machines. It reads the dynamic signals of up to four sensors, calculates characteristic values, compares them with limits and passes the results to a PC, a database or a plant system over Ethernet. Internal memory stores the history, so a trend can be reviewed after an incident. It does not replace a protection system but adds condition information on pumps, fans, motors and compressors.

Where the VSE002 fits and related parts

The VSE002 works with the vibration monitor VKV021 as a different level: the VKV021 is a self-contained switching monitor on one point, while the VSE002 handles up to four dynamic sensors and logs the data for analysis. It serves condition monitoring programmes for pumps, motors and fans where a protection system is not required.

Selection and ordering checklist for the VSE002

Work through the points below before you confirm the order, so that the VSE002 you receive is the one your machine or plant needs.

  • Count the sensors to be connected (up to four on S1 to S4)
  • Check the sensor type compatibility with the dynamic inputs
  • Plan DIN rail space: 114.2 x 25.4 x 105.5 mm, TH35
  • Check network access: factory IP 192.168.0.1
  • Decide how data is read: PC software, TCP/IP

The manufacturer lists this article under the type designation Diagnostic electronics for vibration sensors, DIAGNOSTIC ELECTRONICS. The article number VSE002 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Snap the unit onto a TH35 DIN rail in a control cabinet with the 24 V DC supply, and connect the sensors to the S1 to S4 inputs. Set up the Ethernet connection to a PC with the factory IP address in mind and configure the measurement tasks with the ifm software. At commissioning, record baseline values with the machine in good condition, define alarm limits and test the switching output. Check the cabinet temperature and the cable shield connections during maintenance.

Connect the Ethernet port directly to a PC with a cross-over patch cable for set-up, adjust the IP address for your network, and start the measurement configuration in the ifm software. Record a baseline with the machine in good condition. Because the unit is IP20, it belongs in a cabinet with an ambient temperature of 0 to 70 degrees Celsius.

Typical applications in Oman and the GCC

Condition monitoring of pumps, motor-fan sets and gearboxes. In Oman and the GCC it is used on utility pumps, cooling tower fans and compressor auxiliary drives, to catch bearing wear before breakdown in hot conditions.

Vibration monitoring pays back on unattended utility machines in hot, dusty plants, where a bearing failure can stop a whole section. Capture a healthy baseline early, because trends are more informative than single readings.

VSE002 compared with related ifm types

The table places the VSE002 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
VSE002 4 sensor inputs, Ethernet, DIN rail This page
VKV021 0-25 mm/s RMS, 10-1000 Hz, M8 stud Related type

Information to send with an RFQ for the VSE002

To prepare an accurate offer for the VSE002, please include the following with your enquiry:

  • Number and type of vibration sensors to be connected
  • Machines monitored and the characteristic values required
  • Network integration and data format
  • Cabinet space and DIN rail availability
  • Quantity and delivery location

Storage, handling and spares for the ifm VSE002

Keep the ifm VSE002 in its original packaging until installation, and store it indoors in a dry place without condensation. Protect connectors and cable ends from dust and moisture. In hot GCC warehouses, check that the storage temperature stays inside the range given in the manufacturer datasheet before the unit is installed.

  • Check the article number and connection type against the drawing before mounting.
  • Use the mounting accessories and connection cables recommended for the device, and route cables away from power wiring.
  • Keep at least one spare unit of each type used on critical machines, so that a failed device can be swapped quickly.
  • Record the device type, firmware version where relevant, and parameter settings, so that a replacement can be set up the same way.

When you order the ifm VSE002, include the matching cables, connectors or mounting parts in the same RFQ. This avoids delays at commissioning when a small accessory is missing.

Documents and quotation

No datasheet is attached to this page. Send us the part number VSE002 and we will confirm which documents are available, such as the datasheet and operating instructions, and for IO-Link devices the device description file.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Other Models in the Ifm Vib Range

Seven Star LLC supplies models from the Ifm Vib range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
ifm VSE002 Vibration Diagnostic Electronics, Ethernet, DIN RailVibration MonitoringYou are viewing this model
ifm VKV021 Vibration Monitor, 0-25 mm/s, M8 Stud, 4-20 mAVibration MonitoringView details
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm VSE002 Vibration Diagnostic Electronics,

Answers from our engineering team on installation, compatibility and integration.

01How many sensors can the ifm VSE002 connect?
Four, on the inputs S1 to S4. This is the value published by the manufacturer for the VSE002; confirm details before ordering.
02How does the VSE002 communicate?
By Ethernet 10/100 Mbit/s over an RJ45 connector using TCP/IP.
03How is the VSE002 mounted?
On a TH35 DIN rail according to EN 60715. This is the value published by the manufacturer for the VSE002; confirm details before ordering.
04Does the VSE002 store data?
Yes, in a buffered ring memory with real-time clock for 881664 data records.
05What is the supply of the VSE002?
24 V DC, 200 mA. This is the value published by the manufacturer for the VSE002; confirm details before ordering.