Brand:

ifm PN5003 Pressure Sensor with Display, 0 to 25 bar (Archive)

Description

ifm PN5003 overview

The ifm PN5003 is a pressure sensor with display for 0 to 25 bar and a switching output. The manufacturer datasheet lists it as no longer available and names the PN7093 as an alternative. Ordering description: PN-025-RBR14-HFPKG/US/ /V.

Status note: in the manufacturer datasheet the PN5003 is listed by the manufacturer as an article that is no longer available (archive entry), with the PN7093 named as the alternative article. The datasheet adds that when an alternative article is chosen, its technical data may differ, so engineers should compare the new data sheet before replacing an installed unit. This page describes the PN5003 as documented in that datasheet; ask us about current availability when you send the RFQ.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list this device so that maintenance, procurement and project teams can quote the exact part number against the manufacturer data.

Key features of the PN5003

  • Measuring range 0 to 25 bar (0 to 363 psi).
  • Pressure rating 150 bar.
  • Switching output signal.
  • 18 to 36 V DC, IP 65.
  • G 1/4 internal thread.

PN5003 technical specifications

Parameter Value from the manufacturer datasheet
PN-025-RBR14-HFPKG/US/ /V
Number of inputs and outputs Number of digital outputs: 1
Measuring range 0…25 bar 0…363 psi 0…2.5 MPa
Process connection threaded connection G 1/4 internal thread
Special feature Gold-plated contacts
Application for industrial applications
Media liquids and gases
Medium temperature [°C] -25…80
Min. burst pressure 350 bar 5075 psi 35 MPa
Pressure rating 150 bar 2175 psi 15 MPa
Type of pressure relative pressure
Operating voltage [V] 18…36 DC; (to SELV/PELV)
Current consumption [mA] less than 50
Min. insulation resistance [MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Overvoltage protection yes; (less than 40 V)
Power-on delay time [s] 0.3
Integrated watchdog yes
Total number of outputs 1
Output signal switching signal
Electrical design PNP
Number of digital outputs 1
Output function normally open / normally closed; (parameterisable)
Switching frequency DC [Hz] less than 170
Short-circuit protection yes
Set point SP 0.2…25 bar 4…362 psi 0.02…2.5 MPa
Reset point rP 0.1…24.9 bar 2…360 psi 0.01…2.49 MPa
In steps of 0.1 bar 2 psi 0.01 MPa
Factory setting SP1 = 6.3 bar rP1 = 5.8 bar
Repeatability [% of the span] less than ± 0,1; (with temperature fluctuations less than 10 K)
point 0,2; (-20…80 °C)
Parameter setting options hysteresis / window; normally open / normally closed;
Ambient temperature [°C] -20…80
Storage temperature [°C] -40…100
Protection IP 65
EN 61000-4-3 HF radiated 10 V/m
EN 61000-4-4 Burst 2 kV
EN 61000-4-5 Surge 0,5/1 kV
EN 61000-4-6 HF conducted 10 V
Shock resistance DIN IEC 68-2-27 50 g (11 ms)
Vibration resistance DIN IEC 68-2-6 20 g (10…2000 Hz)
Weight [g] 261.2
Housing cylindrical
Dimensions [mm] Ø 34 / L = 91.5
Materials stainless steel (304/1.4301); stainless steel (316L/1.4404); PC; PBT; PEI; FKM; PTFE
Materials (wetted parts) stainless steel (303/1.4305); ceramics; FKM
Min. pressure cycles 100 million

All values above are taken from the manufacturer datasheet for the PN5003. Ranges are written with three dots, for example 18…30 means 18 to 30. Where a limit depends on the medium or the installation, the datasheet condition applies.

Typical applications in oil and gas, utilities, water and manufacturing

Pneumatic and hydraulic circuits and pump monitoring.

In Oman and the wider GCC, pressure measurement devices like the PN5003 are found in pump, compressor and hydraulic circuit monitoring. Hot ambient conditions, dust and long cable runs make a sensor with clear local indication and stable outputs valuable, because it shortens fault finding for the shift technician. Check the ambient and medium temperature limits in the table above against the actual site conditions before selecting the device.

Selection and compatibility notes for the PN5003

Archive article for like-for-like replacement. Compare with the PN7093 before substituting.

When you match this device to an existing loop, compare the supply voltage, output type, connector and process connection with the installed device, and confirm that the control system input accepts the signal. Because the part number identifies one exact version in the family, a similar-looking sibling can differ in output polarity, range or thread, and it is better to quote the exact designation than a family name.

Installation and commissioning

Depressurise and isolate the line before fitting. Use a compatible process connection and seal, tighten to the value shown in the operating instructions, and avoid mounting where pressure spikes or water hammer are present without a damper. Set the switch points or analogue span, and note the units shown on the display.

Before power-up, check the wiring against the connection diagram in the datasheet, and after power-up allow any start-up delay listed in the table to elapse before judging the output. Document the settings made on site together with the serial number so that a replacement can be configured identically.

Maintenance and service

Compare the reading against a calibrated gauge at planned intervals, check the seal and thread for leaks, and keep the connector clean and dry. Replace the sensor if the zero point cannot be restored.

Related products and ordering notes

Related ifm devices already listed in the Seven Star catalogue can be found through the brand page. When you request this device, please state the quantity, the required delivery location and whether a datasheet copy is needed. If the application is critical, tell us the process medium, pressure and temperature so the engineer can check the data before the quotation is prepared.

Frequently asked questions

  • What is the ifm PN5003? The ifm PN5003 is a pressure sensor with display, 0 to 25 bar, listed as an archive article. The ifm PN5003 is a pressure sensor with display for 0 to 25 bar and a switching output.
  • What supply and protection rating does the PN5003 have? According to the manufacturer datasheet the PN5003 operates from 18…36 DC; (to SELV/PELV) and has protection III.
  • Is the PN5003 still available from the manufacturer? The datasheet marks the PN5003 as no longer available (archive entry) and names the PN7093 as the alternative. Compare the data sheets before replacing it.
  • Does Seven Star LLC supply the PN5003 in Oman? Yes, Seven Star LLC quotes the PN5003 for projects and maintenance in Oman and the GCC. Send the part number PN5003 and the quantity and we will respond with availability.
  • How do I get a quotation for the PN5003? Use the RFQ form on this page with the part number PN5003, the quantity and your delivery location. We will reply with a quotation after checking availability.

Documents and quotation

The manufacturer datasheet is attached to this page where the file is available, and it is the reference for every value shown here. To order, send the RFQ with part number PN5003 and the quantity required, together with the delivery location and any application details. Our team will confirm availability and respond with a quotation.

Datasheets & Documents
  • PDF Datasheet ifm PN5003 Pressure Sensor with Display, 0 to 25 bar (Archive) Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm PN5003 Pressure Sensor with Display, 0 to 25

Answers from our engineering team on installation, compatibility and integration.

01What is the ifm PN5003?
The ifm PN5003 is a pressure sensor with display, 0 to 25 bar, listed as an archive article. The ifm PN5003 is a pressure sensor with display for 0 to 25 bar and a switching output.
02What supply and protection rating does the PN5003 have?
According to the manufacturer datasheet the PN5003 operates from 18...36 DC; (to SELV/PELV) and has protection III.
03Is the PN5003 still available from the manufacturer?
The datasheet marks the PN5003 as no longer available (archive entry) and names the PN7093 as the alternative. Compare the data sheets before replacing it.
04Does Seven Star LLC supply the PN5003 in Oman?
Yes, Seven Star LLC quotes the PN5003 for projects and maintenance in Oman and the GCC. Send the part number PN5003 and the quantity and we will respond with availability.
05How do I get a quotation for the PN5003?
Use the RFQ form on this page with the part number PN5003, the quantity and your delivery location. We will reply with a quotation after checking availability.