Brand:

Festo MFH-5-1/8 Solenoid valve

Description

Festo MFH-5-1/8 overview

The Festo MFH-5-1/8 (part number 9982) is a 5/2-way, single solenoid pneumatic valve built around a poppet seat with a nominal size of 5 mm and a construction width of 26 mm. Its working ports are G1/8, which is the connection size most maintenance teams recognise when they open a machine cabinet or a manifold rail and look for a like-for-like replacement. The housing is die-cast aluminium, and the valve is rated for 1.8 bar to 8 bar of supply pressure.

Buyers usually search this item by its exact type code, Festo MFH-5-1/8, because older machines list the valve only by that code on the nameplate or in the pneumatic diagram. Festo has issued many neighbouring variants with similar names, so a quick check of function, port thread and pressure range against the table below avoids ordering a close but incompatible relative.

The datasheet states that the electrical connection of MFH-5-1/8 is made via an F coil that has to be ordered separately and that the operating voltage is set by the coil. That is a frequent source of confusion, because the base valve ships without the coil and the coil determines whether the valve runs on 24 V DC or on mains voltage. See the coil entries in our catalogue, or tell us the voltage when you send your enquiry.

Key features of MFH-5-1/8

  • Valve function: 5/2-way, single solenoid.
  • Design: Poppet seat with a nominal size of 5 mm.
  • Standard nominal flow rate of 500 l/min according to the datasheet.
  • Working port thread G1/8 and a pressure range of 1.8 bar to 8 bar.
  • Switching time on 8 ms, switching time off 36 ms.
  • Mounting position: any; mounting either on a rail or with through-holes, as listed in the datasheet (Either:, On manifold rail, With through-hole).
  • Degree of protection IP65 when fitted with a suitable coil and plug.
  • Approval listed in the datasheet: c UL us – Recognised (Oil).

Technical specifications of MFH-5-1/8

The table below reproduces the data published by the manufacturer for part number 9982. Values are given for compressed air to the quality class stated in the datasheet and for the ambient and media temperature windows shown there.

Parameter Value
Part number 9982
Type designation MFH-5-1/8
Valve function 5/2-way, single solenoid
Type of actuation Electrical
Construction width 26 mm
Standard nominal flow rate (standardised to DIN 1343) 500 l/min
pneumatic working port G1/8
Operating voltage Via solenoid coil, must be ordered separately
Operating pressure 0.18 MPa…0.8 MPa, 1.8 bar…8 bar
Design Poppet seat
Type of reset Mechanical spring
Approval c UL us – Recognised (Oil)
Degree of protection IP65
Nominal size 5 mm
Grid dimension 27 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting
Type of piloting Piloted
Flow direction Non-reversible
lap Underlap
Overlap No
Switching time off 36 ms
Switching time on 8 ms
Max. positive test pulse with 0 signal 2200 µs
Max. negative test pulse with 1 signal 3700 µs
Characteristic coil data See solenoid coil, to be ordered separately
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will, always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Storage temperature -20 °C…60 °C
Media temperature -10 °C…60 °C
Ambient temperature -5 °C…40 °C
Product weight 270 g
Electrical connection Via F coil, to be ordered separately
Type of mounting Either:, On manifold rail, With through-hole
Pilot exhaust port 82 M5
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Pneumatic connection, port 4 G1/8
Pneumatic connection, port 5 G1/8
Note on materials RoHS compliant
Material seals NBR, TPE-U(PU)
Material housing Die-cast aluminium

Typical applications in Oman and the GCC

Pneumatic valves of this size class switch cylinders, rotary drives and small process actuators on packaging lines, filling machines, material handling systems and general machine building. In Oman and the wider GCC the MFH-5-1/8 turns up in food and beverage plants, water treatment skids, cement and building-material works, workshops, and on the pneumatic panels of auxiliary equipment at oil and gas and utility sites. A valve with a flow of 500 l/min and a G1/8 port suits actuators of moderate size where a quick response matters.

Spare-part demand is strongest where a machine imported years ago is still running. When a valve fails, the plant cannot always wait for a new machine manual or an updated bill of materials, so maintenance planners ask for the exact type code. We help match that code to the part number 9982 so that the replacement arrives with the correct function and thread.

Selection and compatibility notes for MFH-5-1/8

  • Confirm the valve function (5/2-way, single solenoid) against your circuit. A 5/2-way valve and a 3/2-way valve are not interchangeable even when the housing looks alike.
  • Check the port thread. This item has G1/8 ports; adapters change the size but add leak points and reduce flow.
  • Verify that your supply pressure sits inside 1.8 bar to 8 bar. Some sibling types extend the lower or upper limit, so the pressure range is a quick way to tell them apart.
  • Order the matching solenoid coil and plug separately, because the datasheet says the coil is not included.
  • Match the mounting method. Rail mounting and through-hole mounting both appear in the data, but your sub-base or manifold has to fit the 26 mm construction width.

If your nameplate shows a slightly different suffix, for example a letter for the pilot design or an Ex marking, tell us. Neighbouring part numbers exist and we would rather compare them with you than ship the wrong one.

Installation and commissioning

Before fitting the MFH-5-1/8, depressurise and lock out the pneumatic supply. Clean the sub-base or manifold surface and make sure that the gaskets and screws belong to this valve size. Connect the supply to port 1 and the working lines to the ports shown on the valve body, and route exhaust ports so that silencers or throttles can be fitted. The datasheet lists the exhaust-air function, so check it for your version before you add flow controls.

Then pressurise slowly, operate the valve once and watch the actuator stroke. Listen for leaks at the base and at the ports. Only after a clean test should you return the machine to automatic cycles.

Maintenance and spare parts

Compressed air quality decides the life of a pneumatic valve. Keep the air supply filtered and dry to the class stated in the datasheet, and drain upstream filters on schedule. A valve that has been run on lubricated air should stay on lubricated air, as the datasheet notes, because the factory lubrication is washed out. Replace the valve, not only its coil, if switching becomes slow or if you see exhaust leakage that does not clear after several switching cycles.

Keep one spare MFH-5-1/8 and one matching coil on the shelf for critical machines. A spare with the same part number 9982 saves a repeat conversation about thread, function or voltage during a breakdown.

Related products and ordering notes

Neighbouring types in this catalogue family include other MFH and VL/O valves, solenoid coils, filter regulators and cylinders. Choosing a complete set from one reference saves time, and our team can compare the MFH-5-1/8 with alternatives if your control voltage, thread standard or pressure range differs.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with Festo. Product names and part numbers are used only to identify the item you ask for.

FAQ summary for MFH-5-1/8

What is the Festo part number for MFH-5-1/8? The part number for the MFH-5-1/8 is 9982. Please quote both the type code and the part number 9982 in your RFQ so the correct item is identified.

What valve function does MFH-5-1/8 have? The datasheet describes the MFH-5-1/8 as a 5/2-way, single solenoid valve with a poppet seat design and a nominal size of 5 mm.

What are the port size and flow rate of MFH-5-1/8? The working ports are G1/8 and the standard nominal flow rate is 500 l/min, according to the datasheet for part number 9982.

What pressure range applies to MFH-5-1/8? The datasheet gives an operating pressure range of 1.8 bar to 8 bar for part number 9982.

Is a coil included with MFH-5-1/8? No. The datasheet states that the electrical connection is via an F coil that must be ordered separately. Send us the control voltage so the matching coil can be quoted with the valve.

Documents and quotation

A datasheet for part number 9982 is available from us on request and is attached to this product page when published. To receive a quotation, send the RFQ with the part number 9982, the type designation MFH-5-1/8 and the quantity required, together with the delivery location in Oman or the GCC. We will confirm availability and lead time and answer technical questions about fit and function.

Datasheets & Documents
  • PDF Datasheet Festo MFH-5-1/8 Solenoid valve Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.

Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.

Festo company profile

Founded 1925, Esslingen am Neckar, Germany
Founders Albert Fezer and Gottlieb Stoll
Name From FEzer and STOll
Headquarters Esslingen am Neckar
Ownership Family-owned
Product families DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers

Milestones

  • 1925: Fezer and Stoll found the company in Esslingen.
  • 1950s: Festo begins making pneumatic components.

Festo products listed

Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.

Festo products we list

Family Examples
Automation Accessories KMP3-9P-08-5 Connecting Cable, KMPYE-AIF-1-GS-GD-2 Cable
Pneumatic Cylinders ADN-100-30-A-P-A Compact Cylinder
Valve Actuators DSBC-32-100-PPVA-N3 ISO Cylinder
Pressure Instrumentation VPEV-1/8 Pressure Switch
Solenoid Valves VTUG Valve Terminal

Ordering Festo parts: what we need

Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.

Facts checked against Festo's corporate history pages, October 2026.

FAQ

Questions about the Festo MFH-5-1/8 Solenoid valve

Answers from our engineering team on installation, compatibility and integration.

01What is the Festo part number for MFH-5-1/8?
The part number for the MFH-5-1/8 is 9982. Please quote both the type code and the part number 9982 in your RFQ so the correct item is identified.
02What valve function does MFH-5-1/8 have?
The datasheet describes the MFH-5-1/8 as a 5/2-way, single solenoid valve with a poppet seat design and a nominal size of 5 mm.
03What are the port size and flow rate of MFH-5-1/8?
The working ports are G1/8 and the standard nominal flow rate is 500 l/min, according to the datasheet for part number 9982.
04What pressure range applies to MFH-5-1/8?
The datasheet gives an operating pressure range of 1.8 bar to 8 bar for part number 9982.
05Is a coil included with MFH-5-1/8?
No. The datasheet states that the electrical connection is via an F coil that must be ordered separately. Send us the control voltage so the matching coil can be quoted with the valve.