- Automation & ControlView all 2,744 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand
Bently Nevada
Bently Nevada is the American machinery protection and condition monitoring brand behind the 3500 rack, the 3300 XL proximity probe and the System 1 software. It was founded in 1961 in Minden, Nevada, and is today a Baker Hughes business. Seven Star LLC is an independent supplier in Muscat. We list Bently Nevada monitors, I/O modules, probes, proximitors, velocity transducers and transmitters for rotating equipment in Oman and the GCC, and source them by full part number.
Read the full brand profile ↓- 130 products
- 1 category

Showing 97–120 of 130 products
Brand profile
About Bently Nevada
- Founded
- 1961
- Headquarters
- Minden, Nevada, USA
- Speciality
- Machinery vibration monitoring systems
- Listed with us
- 130 products
Bently Nevada is the American machinery protection and condition monitoring brand behind the 3500 rack, the 3300 XL proximity probe and the System 1 software. It was founded in 1961 in Minden, Nevada, and is today a Baker Hughes business.
Seven Star LLC is an independent supplier in Muscat. We list Bently Nevada monitors, I/O modules, probes, proximitors, velocity transducers and transmitters for rotating equipment in Oman and the GCC, and source them by full part number.
Bently Nevada company profile
| Established | 1961, Minden, Nevada, USA, by Donald E. Bently. The business started earlier as Bently Scientific in Berkeley, California (1956). |
|---|---|
| Known for | The first commercial eddy-current proximity transducers for measuring shaft vibration and position on high-speed turbomachinery |
| Ownership | Acquired by GE Energy in 2002; part of Baker Hughes since GE Oil & Gas combined with Baker Hughes in 2017 |
| Rack generations | 5000 series (from 1965), 3300 series (from 1988), 3500 series (from 1995), Orbit 60 (current platform) |
| Product families | Machinery protection racks, proximity probes and proximitors, Keyphasor sensors, velocity and acceleration transducers, 2-wire vibration transmitters, general-purpose monitors, portable analyzers, wireless sensors and System 1 condition monitoring software |
| Typical machines | Steam and gas turbines, centrifugal and reciprocating compressors, pumps, motors, generators, fans and gearboxes |
Milestones
- 1956: Donald E. Bently starts Bently Scientific in Berkeley, California.
- 1961: The company moves to Minden, Nevada, as Bently Nevada.
- 1965: The 5000 series monitoring system is introduced.
- 1988: The 3300 series follows.
- 1995: The 3500 machinery protection system is launched.
- 2002 and 2017: GE Energy acquires Bently Nevada; it becomes part of Baker Hughes in 2017.
Bently Nevada product series
| Series | Type | What it does |
|---|---|---|
| 3500 | Machinery protection rack | Continuous online protection with alarm and danger relays. Modules include the 3500/15 power supply, 3500/20 rack interface, 3500/25 Keyphasor, 3500/42M proximitor/seismic, 3500/50 tachometer, 3500/60 temperature, 3500/33 relay and 3500/92 communication gateway |
| 3500 recip modules | Reciprocating compressor monitoring | 3500/70M impulse velocity, 3500/72M rod position and 3500/77M cylinder pressure |
| Orbit 60 | Protection and monitoring platform | The current Bently Nevada platform for protection, condition monitoring and data integration with System 1 |
| 3300 XL 8 mm | Proximity transducer system | Probe, extension cable and proximitor sensor for radial vibration, thrust position and Keyphasor reference on fluid-film bearing machines; also 5 mm and 25 mm versions |
| 330500 Velomitor, 190501 Velomitor CT | Piezo-velocity sensors | Casing velocity on rolling-element bearing machines and low-speed cooling tower fans |
| 990 and 991 | 2-wire transmitters | 4-20 mA vibration (990) and thrust position (991) signals straight into a PLC or DCS, without a monitor rack |
| 1900/65A, 2300 | Compact monitors | Protection for balance-of-plant pumps, fans and motors where a full 3500 rack is not justified |
A proximity probe measures the gap to the shaft, so it sees shaft movement inside a fluid-film bearing directly. A velocity or acceleration sensor sits on the casing and suits rolling-element bearing machines. Critical turbomachinery usually carries two X-Y probes per bearing, two axial probes for thrust position and a Keyphasor probe for speed and phase.
Where Bently Nevada systems are used
In Oman and the GCC, Bently Nevada racks and probes protect gas turbines, compressors and steam turbines in gas processing, LNG, refining, petrochemical, power and desalination plants. Many installations are 3500 racks that have run for years, so most requests are for like-for-like module, probe, extension cable and proximitor replacements, plus upgrades to newer monitors.
Ordering and replacement: what we need
For probes and proximitors, send the full part number with all option digits (for example 330101-00-27-10-02-05). The digits set the probe length, cable length, connector and approvals, and the probe, cable and proximitor must match in total system length. For 3500 modules, send the module and I/O part numbers from the rack and say whether the I/O is internal or external termination, or barrier type. If a module is obsolete, we quote the replacement that Bently Nevada names and point out any configuration or firmware change.
Frequently requested Bently Nevada models: Bently Nevada 3300 XL 8mm Proximity Probe, Bently Nevada 125680-01 3500/40M Proximitor I/O Module, Bently Nevada 149369-01 3500/25 Enhanced Keyphasor Module, Bently Nevada 126648-02 Isolated Keyphasor I/O Module, External, Bently Nevada 3500/61 Temperature Monitor with Recorder Outputs, Bently Nevada 3500/50M Tachometer Module.
Facts checked against Baker Hughes Bently Nevada pages and published company history, October 2026.
Planning a 3500 rack upgrade or a module replacement? Our Bently Nevada 3500 modules guide explains what each monitor, relay and communication module does, and the 3500 module replacement checklist lists the details to confirm before you order.
Bently Nevada products by category
Most viewed Bently Nevada products
Guides and articles
All articles →Request a Quote for Bently Nevada Products
Looking for Bently Nevada parts not listed here, or pricing for a project? Send us the part numbers and quantities. Seven Star LLC sources genuine Bently Nevada products for customers across Oman and the GCC and replies with a formal quotation.
- Genuine OEM products
- Supply across Oman & the GCC
- Formal quotation from our sales team
Free, no-obligation quotation · takes about 1 minute
Other enquiries: [email protected] · WhatsApp
FAQ
Questions about Bently Nevada
Common questions about Bently Nevada equipment, part numbers and supply to Oman and the GCC.
01How do I decode a Bently Nevada probe part number such as 330103-00-05-10-01-00?
The base number, 330103, identifies the 3300 XL 8 mm probe and its thread type. The option fields that follow give, in order, the unthreaded length, the overall case length, the total cable length, the connector and cable type, and the agency approval. All five fields are needed to supply the same probe, so send the number exactly as printed.
02Do the probe, extension cable and Proximitor sensor have to match?
Yes. A proximity channel is calibrated as a set. The probe, extension cable and Proximitor sensor must belong to the same transducer series and add up to the same system length, commonly 5 or 9 meters. Mixing series or lengths changes the scale factor and gives wrong vibration and gap readings. Send the part numbers of all three components.
03What is needed to order a replacement 3500 monitor module?
The module number with its option fields, and the part number of the I/O module behind it, because the two are ordered separately and must suit each other. Tell us also whether the rack has hazardous area or other agency approvals and, if you can, the firmware revision of the present module and the rack configuration software version.
04Is the 3500 system replaced by Orbit 60?
Bently Nevada presents Orbit 60 as its newer monitoring platform and as the way to modernize existing 3500 racks. Many sites keep operating 3500 systems and need individual modules. Whether a particular module is still produced, or which item the manufacturer names in its place, is something we check for the exact part number you send.
05Is Seven Star LLC a distributor of Bently Nevada?
No. Seven Star LLC is an independent supplier that sources Bently Nevada modules and transducers through commercial channels. We check the part number and its options against the manufacturer's documentation, propose the manufacturer's successor when an item is obsolete, and provide the datasheet and the certificates the manufacturer issues with the order on request.























