- Automation & ControlView all 2,786 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Rotork
Rotork YT-2501 Remote Sensor Smart Valve Positioner 4-20 mA
Description
Rotork YT-2501 overview
The Rotork YT-2501 is a smart valve positioner, listed in the manufacturer documentation as a remote sensor smart valve positioner. The remote architecture of the Rotork YT-2501 is helpful on hot process lines, vibrating compressor-driven systems and tight installations where the body cannot sit on the actuator yoke. This page summarises the published data so that engineers and buyers can confirm the part number quickly, compare it with neighbouring models and prepare a precise enquiry. Plants in the Gulf often run equipment for decades, and accessories of this kind are frequently ordered long after the project was built, so having the exact designation, the published ratings and the manual in one place saves time during shutdown planning.
Every figure on this page comes from the Rotork product literature for the YT-2501. Where a value is not published, we do not quote one, and where the exact build matters, please confirm it against the nameplate of the unit you intend to replace. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Key features of the YT-2501
- Position sensor separated from the pneumatic body and connected by a 5 m cable.
- Sensor temperature rating from -55 to 120 °C while the body is rated -30 to 80 °C.
- Same fail-freeze, LCD and auto-calibration functions as the YT-2500 family.
- Optional HART communication.
- Suited to valves with hot surfaces or strong vibration at the actuator.
These functions make the YT-2501 a practical choice where the published data matches the duty, and the specification table below gives the exact figures to use when you check compatibility.
YT-2501 technical specifications
| Housing material | Aluminum |
|---|---|
| Input signal | 4-20 mA DC |
| Minimum current signal | 3.5 mA standard; 3.8 mA with HART option |
| Supply pressure | 0.14 to 0.7 MPa (1.4 to 7 bar) |
| Acting type | Single or double |
| Stroke | Linear 10 to 150 mm; rotary 55 to 110° |
| Impedance | Max. 500 Ω at 20 mA DC |
| Conduit entry | G 1/2, 1/2 NPT or M20x1.5P |
| Air connection | Rc 1/4, G 1/4 or 1/4 NPT |
| Gauge connection | Rc 1/8 or 1/8 NPT |
| Ingress protection | IP66, excluding pressure gauges |
| Explosion protection | Non-explosion proof, or intrinsic safety Ex ia IIC T5/T6 Gb, Ex ia IIIC T100 °C/T85 °C Db |
| Operating temperature | Sensor -55 to 120 °C; body -30 to 80 °C |
| Ambient temperature, Ex | T5 -30 to 60 °C; T6 -30 to 40 °C |
| Linearity / hysteresis | Each ± 0.5 % F.S. |
| Sensitivity / repeatability | ± 0.2 % F.S. / ± 0.3 % F.S. |
| Flow capacity | Fail freeze 60 LPM; fail safe 40 LPM (0.14 MPa supply) |
| Output characteristic | Linear, quick open, equal percentage, user set |
| Weight | Positioner 1.6 kg (3.4 lb); remote sensor 0.6 kg (1.2 lb) or 1.0 kg (2.1 lb) by version; 5 m cable 0.6 kg (1.3 lb) |
Values are taken from the manufacturer manual for the YT-2501 and are typical published limits tested under standard laboratory conditions. Always verify the nameplate, certificate and option codes of your unit.
Typical applications in Oman and the GCC
In oil and gas facilities, refineries and gas processing plants around Oman and the wider GCC, a smart positioner such as the YT-2501 is fitted to pneumatic globe, rotary and quarter-turn control valves that regulate flow, pressure or level. Power and desalination plants use similar positioners on feedwater, attemperation and bypass valves, while water treatment sites and manufacturing lines use them on dosing, chemical feed and utility valves. The 4-20 mA interface means the YT-2501 can be wired to a distributed control system or PLC loop without changes to the control architecture, and the pneumatic side connects to standard actuator ports. Operating conditions in the region add their own demands: high summer ambient temperatures, dust, humidity near the coast and long periods of continuous operation. Equipment is therefore chosen with attention to temperature range, enclosure protection and the quality of local instrument air, and these are the same points that the specification table above helps you verify.
Selection and compatibility notes for the YT-2501
When comparing the YT-2501 with other positioners, start with the actuator: single or double acting, linear stroke in millimetres or rotary angle in degrees, and the supply pressure available at the valve. Then check the area classification and the certificate set printed on the nameplate, the minimum loop current and compliance voltage of your controller, and whether you need HART, the 4-20 mA feedback output or limit switches. Matching the mounting bracket to the actuator standard, such as NAMUR for rotary actuators, is as important as the electrical data, so quote the actuator make and model with your RFQ. Beyond the headline numbers, think about the whole instrument air and signal chain. Moisture, oil and particles in compressed air cause most field failures of pneumatic accessories, so confirm dryer performance, filter condition and tubing material before blaming a device. For electrical items, check cable gland type, thread form and certification, and keep segregation between intrinsically safe and non-intrinsically safe wiring. In hot Gulf summers, enclosure surface temperature and ambient limits deserve a second look, especially for valves in direct sunlight where the local temperature can exceed the site design ambient. Writing these items on the data sheet prevents an incorrect substitute at the time of replacement.
Installation and commissioning
Mount the YT-2501 on the actuator using the correct linear or rotary bracket so that the feedback lever or sensor follows the stem without side load. Pipe clean, dry, oil-free instrument air through a filter regulator, connect the output to the actuator port or ports, and wire the 4-20 mA loop with shielded cable and a suitable gland. After the mechanical and pneumatic work, run the auto-calibration routine described in the manufacturer manual, check the stroke at zero, mid and full signal, set the characteristic and tune the orifices if the valve hunts. Record the final settings in the loop sheet.
Maintenance and service
Maintenance of the YT-2501 centres on the quality of the supply air. Drain filters regularly, check regulator set points and inspect tubing and fittings for leaks. At planned outages, re-run the calibration, compare the stroke against the control room indication, and inspect the feedback linkage or sensor for wear. Seals, gauges and the pneumatic relay are the usual wear items, and repair parts should be matched to the exact model and serial number printed on the label. Keep covers closed and sealed after any adjustment to preserve ingress protection and, where relevant, the explosion protection rating.
Related products and ordering notes
Related items that are often quoted together with the YT-2501 include the YT-200 series air filter regulators, YT-300 series volume boosters, YT-400 series lock-up valves, SPTM position transmitters and limit switch boxes from the same manufacturer line. Mounting brackets, tubing kits and replacement gauges are matched to the actuator, so please send the actuator type and size with your enquiry. For obsolete or legacy positioners that you are replacing, send the old nameplate details so the replacement can be checked against stroke, signal and connection data.
Frequently asked questions about the YT-2501
- What is the YT-2501? It is the remote-sensor version of the YT-2500 family: the position sensor is mounted on the valve and connected to the positioner body through a cable, so the electronics can sit in a cooler or calmer position.
- What temperature can the YT-2501 sensor withstand? The manual lists -55 to 120 °C for the sensor and -30 to 80 °C for the body.
- How long is the cable supplied with the YT-2501? The weight table in the manual refers to a 5 m cable weighing 0.6 kg, so a 5 m cable is the reference length. Confirm lengths in your RFQ.
Documents and quotation
The manufacturer manual that contains the specification for the YT-2501 is available as a PDF datasheet on this page. When you are ready to order, send an RFQ that quotes the part number YT-2501, the quantity, the actuator or valve make and size, the control signal and supply pressure, the hazardous-area scheme and the delivery location. We will respond with availability and lead time for the YT-2501. Please also mention whether the unit replaces an existing device and attach a photo of its nameplate if possible.
Other Models in the Smart Range
Seven Star LLC supplies models from the Smart range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Rotork YT-3350 Smart Valve Positioner, Stainless Steel 316 | Valve Positioners | View details |
| Rotork YT-3400 Flameproof Smart Valve Positioner 4-20 mA HART | Valve Positioners | View details |
| Rotork YT-2500 Smart Valve Positioner 4-20 mA, Aluminum | Valve Positioners | View details |
| Rotork YT-2550 Smart Valve Positioner, Stainless Steel 316 | Valve Positioners | View details |
| Rotork YT-2501 Remote Sensor Smart Valve Positioner 4-20 mA | Valve Positioners | You are viewing this model |
Datasheets & Documents
- Datasheet Rotork YT-2501 Remote Sensor Smart Valve Positioner 4-20 mA Product Manual Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Rotork is a British flow control company best known for electric valve actuators. Jeremy Fry founded Rotork Engineering Company in Bath in 1957, the year its first actuator, the 100A, went on sale, and the group is still headquartered in Bath and listed on the London Stock Exchange. Today Rotork makes electric, pneumatic, hydraulic and electro-hydraulic actuators, gearboxes, precision regulators and valve positioners.
Seven Star LLC is an independent supplier listing Rotork actuators, Rotork Fairchild regulators, YTC positioners and spare parts for buyers in Oman and the GCC. Replacement units are matched from the actuator nameplate and wiring diagram number.
Rotork company profile
| Origin | Founded by Jeremy Fry in 1957 in Bath, England; first product the 100A valve actuator |
|---|---|
| Headquarters | Brassmill Lane, Bath, United Kingdom |
| Ownership | Rotork plc, a public company listed on the London Stock Exchange |
| Acquired brands | Fairchild precision pneumatic controls (2011, Winston-Salem, USA), YTC valve positioners (Young Tech Co., Seoul, 2014), Mastergear gearboxes (2016) |
| Product families | Intelligent electric actuators, control valve actuators, electro-hydraulic and fluid power actuators, gearboxes, precision regulators, positioners and network control systems |
Milestones
- 1957: Jeremy Fry founds Rotork in Bath, England; the first product is the 100A valve actuator.
- 2011: Fairchild precision pneumatic controls (Winston-Salem, USA) is acquired.
- 2014: YTC valve positioners (Young Tech Co., Seoul) is acquired.
- 2016: Mastergear gearboxes is acquired.
Rotork actuators, regulators and positioners
| Series | Type | Typical use |
|---|---|---|
| IQ3 | Intelligent multi-turn electric actuator | Gate and globe valves, penstocks and sluice gates; non-intrusive setup with a Bluetooth setting tool, double-sealed enclosure, data logging |
| IQT3 | Intelligent part-turn electric actuator | Ball, butterfly and plug valves and dampers, with the same setup and diagnostics as IQ3 |
| CVA | Precision control valve electric actuator | Continuous modulating control of linear and part-turn control valves where instrument air is not available |
| CMA | Compact modulating electric actuator | Small control valves, chemical injection and metering pumps |
| Skilmatic SI3 | Self-contained electro-hydraulic actuator | Spring-return fail-safe and ESD duty with partial stroke testing, needing only an electrical supply |
| GP / GH | Scotch yoke pneumatic (GP) and hydraulic (GH) actuators | Large quarter-turn valves on pipelines and ESD service; spring-return or double-acting |
| CP | Compact pneumatic quarter-turn actuator | Smaller on-off ball and butterfly valves on plant air |
| Fairchild 10, 30, 55, 66, M11, 81 | Precision pressure regulators | Instrument air to positioners and actuators, test benches; Model 66 in stainless steel for corrosive and offshore sites |
| Fairchild 1000 | No-bleed precision regulator | Saves instrument air or gas where continuous bleed is not acceptable |
| Fairchild 10BP, 4000ABP | Back pressure regulators | Holding upstream pressure in process and test systems |
| YTC YT-1000, YT-3300 | Valve positioners | Electro-pneumatic (YT-1000) and smart HART (YT-3300) positioning of linear and rotary pneumatic actuators |
Where Rotork equipment is used
Rotork actuators are common on oil and gas pipelines and terminals, refineries and gas plants, water and wastewater networks, desalination plants and power stations. Electric IQ actuators handle isolation valves on long pipelines and water mains, often networked over Rotork Pakscan, Modbus or another fieldbus. Skilmatic and scotch yoke actuators cover emergency shutdown valves, and Fairchild regulators and YTC positioners sit on pneumatic control valves throughout process plants.
Ordering Rotork actuators and spare parts: what we need
Send photos of the actuator nameplate with the model, serial number and wiring diagram number; the wiring diagram is usually inside the terminal cover. Rotork can identify the original build, including options and control interface, from the serial number. For a new application add the valve type and size, required torque or thrust, operating time, mounting flange (ISO 5210 or ISO 5211), power supply, control signal or network protocol, fail-safe requirement and hazardous-area marking. For regulators and positioners send the full model code and the pressure or signal ranges.
Facts checked against Rotork plc company information and product data, October 2026.
Browse Rotork products by category: Valve Actuator, Regulators, Valve Positioner.
FAQ
Questions about the Rotork YT-2501 Remote Sensor Smart Valve Positioner
Answers from our engineering team on installation, compatibility and integration.
01What is the YT-2501?
It is the remote-sensor version of the YT-2500 family: the position sensor is mounted on the valve and connected to the positioner body through a cable, so the electronics can sit in a cooler or calmer position.
02What temperature can the YT-2501 sensor withstand?
The manual lists -55 to 120 °C for the sensor and -30 to 80 °C for the body.
03How long is the cable supplied with the YT-2501?
The weight table in the manual refers to a 5 m cable weighing 0.6 kg, so a 5 m cable is the reference length. Confirm lengths in your RFQ.
04What control signal does the YT-2501 use?
A 4-20 mA DC input with a supply of 0.14 to 0.7 MPa (1.4 to 7 bar), identical to the YT-2500 family.
05How do I request a quotation for the YT-2501?
Send the part number YT-2501 with quantity, actuator or valve details, signal, supply and any hazardous-area requirement, and we will answer your RFQ. Seven Star LLC is an independent supplier and is not affiliated with Rotork.


















Reviews
There are no reviews yet.