- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Beamex
Beamex 8066780 BC12 Power Supply for MC5
Description
Overview of Beamex BC12 power supply for MC5 Beamex 8066780
The Beamex 8066780 is the BC12 power supply for the MC5 calibrator, with an input voltage of 120 to 240 VAC. The power cord is selected separately.
Products near the end of their availability are the most requested spare parts.
This page describes Beamex BC12 power supply for MC5 for buyers who need the exact part number Beamex 8066780. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.
Key features of 8066780
- Order code: 8066780.
- Description: BC12 power supply for MC5.
- Input voltage: 120 to 240 VAC.
- Power cord: Ordered separately; US cord is 6676270.
- Availability note: The manufacturer states estimated availability until the end of 2026.
Technical specifications for 8066780
| Order code | 8066780 |
|---|---|
| Description | BC12 power supply for MC5 |
| Input voltage | 120 to 240 VAC |
| Power cord | Ordered separately; US cord is 6676270 |
| Availability note | The manufacturer states estimated availability until the end of 2026 |
All values above come from the manufacturer documentation and may change with later revisions. Please quote 8066780 when you need the matching datasheet or a confirmation of the current revision.
Typical applications in Oman and the GCC
A dependable charger is essential for calibrators that are used on every shift. Instrument teams in Oman and the GCC rely on power supplies that accept a wide mains range and travel easily between plant, workshop and vehicle.
Spare supplies are also kept at remote sites, offshore platforms and contractor camps, where a damaged or misplaced charger would otherwise leave an instrument unusable until the next supply run.
The part is relevant wherever the related calibration equipment is used: oil and gas, utilities, water, process manufacturing and calibration service providers in Oman and the wider GCC.
Equipment used in Oman and the wider GCC faces high ambient temperatures, dust and coastal humidity. Keep instruments and accessories out of direct sun, avoid leaving them in closed vehicles, and allow cold equipment to acclimatise before use when moving from an air-conditioned room to an outdoor unit. Cap connectors and threads when they are not in use so that sand and moisture stay out.
Selection and compatibility notes for 8066780
The manufacturer webshop shows an estimated availability until the end of 2026, so MC5 users should secure spares soon. The matching battery pack is 8066660.
The US power cord 6676270 is compatible with the BC12.
Before ordering 8066780, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.
If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 8066780 before it is supplied.
Installation and commissioning of 8066780
Connect the power cord to the supply first, then to the mains, and finally to the calibrator charging socket. Check that the cord plug matches the local socket type; the power cord is a separate part number from 8066780. Allow the calibrator to charge in a dry, ventilated place within the temperature limits in its specification.
Do not cover the supply while charging, and do not use a damaged cable. Disconnect when charging is complete if the instrument will be stored for a long period.
Maintenance and care
Inspect the cable and plug regularly for cuts, kinks and heat marks and replace the unit if there is any damage. Keep the unit dry and away from dust and direct heat. Label each supply with the calibrator it belongs to so that the right one is used for each model.
Use 8066780 only with the calibrator it is listed for, because charger and battery are matched.
Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.
Related products and ordering notes for 8066780
Related items are the matching battery pack, the country-specific power cord and a carrying case. List them together to receive a single quotation.
Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.
Please note that Seven Star LLC prepares each quotation for 8066780 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.
The part number 8066780 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.
Frequently asked questions about 8066780
- Which calibrator uses 8066780? The MC5 calibrator, according to the manufacturer documentation for 8066780.
- What is the input voltage range? 120 to 240 VAC, according to the manufacturer documentation for 8066780.
- Is the part still available? The manufacturer shows an estimated availability until the end of 2026.
- Which battery goes with it? The NiMH pack 8066660, according to the manufacturer documentation for 8066780.
- Is a power cord included? No. Select the cord separately, according to the manufacturer documentation for 8066780.
Documents and quotation
The official Beamex MC5 User Guide is attached to this page as a PDF. Its charger and battery sections describe the external charger for the MC5 and the charging indications on the calibrator. Quote order code 8066780 in your request and we will confirm compatibility with your unit in a written quotation.
Datasheets & Documents
- Datasheet Beamex MC5 User Guide (official PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.
Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.
Beamex company profile
| Origin | Founded in 1975 in Finland by four calibration technicians; first factory 1977 |
|---|---|
| Headquarters | Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992 |
| Product families | MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software |
| Typical duty | Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters |
Milestones
- 1975: Four calibration technicians found the company in Finland.
- 1977: The first factory opens.
- 1992: ISO 9001 certification.
Beamex calibrators and accessories
| Model | Type | Typical use |
|---|---|---|
| MC6 | Advanced field calibrator and communicator | Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results |
| MC6-Ex | Intrinsically safe field calibrator | Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit |
| MC6-T | Temperature calibrator with integrated dry block | Temperature sensors and transmitters, with multifunction electrical and pressure measurement |
| MC4, MC2 | Documenting and hand-held process calibrators | Routine loop, transmitter and switch checks in the field |
| FB, MB | Field and metrology temperature dry blocks | FB for field calibration; MB for higher-accuracy workshop and laboratory work |
| ePG, POC8 | Electric pressure pump and automatic pressure controller | Automated pressure calibration; POC8 for workshop calibration benches |
| PGC, PGM, PGL, PGPH, PGHH | Hand pressure pumps | Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH) |
| EXT modules | External pressure modules | Extending MC calibrators to additional ranges, 70 kPa to 100 MPa |
Where Beamex equipment is used
Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.
Ordering Beamex equipment: what we need
State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.
Facts checked against Beamex company history and product information, October 2026.
Browse Beamex products by category: Portable Test & Measurement, Temperature Instrumentation.
FAQ
Questions about the Beamex 8066780 BC12 Power Supply for MC5
Answers from our engineering team on installation, compatibility and integration.
01Which calibrator uses 8066780?
The MC5 calibrator, according to the manufacturer documentation for 8066780.
02What is the input voltage range?
120 to 240 VAC, according to the manufacturer documentation for 8066780.
03Is the part still available?
The manufacturer shows an estimated availability until the end of 2026.
04Which battery goes with it?
The NiMH pack 8066660, according to the manufacturer documentation for 8066780.
05Is a power cord included?
No. Select the cord separately, according to the manufacturer documentation for 8066780.


















Reviews
There are no reviews yet.