- Automation & ControlView all 2,750 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Cortem
Cortem RLFE-80N2 Ex de Luminaire for Discharge Lamps
Description
Cortem RLFE-80N2 overview
Cortem RLFE-80N2 is a Ex de discharge-lamp luminaire that belongs to the RLFE series of Ex de luminaires for discharge lamps up to 400 W, used for lighting large areas in chemical, petrochemical, offshore and onshore plants in Zone 1, 2, 21 and 22. Buyers in Oman and across the GCC look for this exact code when they replace, extend or document hazardous-area installations, and the data below is taken from the manufacturer catalogue sheet for the series. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Cortem RLFE-80N2 is one specific size or lamp rating in a wider range. The series name appears in the part number, and the table later on this page shows the dimensions and ratings that belong to this code only. Quote the full code RLFE-80N2 exactly as written when you contact us, because neighbouring sizes look similar but do not share the same internal volume or fixing centres.
Key features of RLFE-80N2
- Separate chambers for lamp holder, ballast and igniter, and an Ex e terminal box, which makes maintenance quicker
- Borosilicate globe stable enough that the luminaire can be installed without the cage where the standard allows it
- Cooling fins for good heat dissipation
- Terminals accept 4 square millimetre conductors and allow looping in and out
- Reflectors, pole brackets and lamps are available as accessories
RLFE-80N2 technical specifications
| Parameter | Value |
|---|---|
| Part number | RLFE-80N2 |
| Series | RLFE |
| Dimensions A / A1 / dia B / C | 425 / 495 / 236 / 250 mm |
| Lamp type | Sodium vapour |
| Lamp holder | E40 |
| Lamp power | 100 W |
| Temperature class (Ta +60 C) | T4 |
| Max surface temperature | 125 C |
| Weight | 10.5 kg |
| Parameter | Value |
|---|---|
| Marking | II 2GD, Ex de IIC T.. Gb, Ex tb IIIC T..C Db, IP66 |
| ATEX certificate | ITS 12 ATEX 17645X |
| IECEx certificate | ITS 12.0048X |
| Ambient temperature | -20 to +60 C |
| Ingress protection | IP66 |
| Rated voltage and frequency | 230 Vac, 50 Hz |
| Power factor | 0.96 |
| Parameter | Value |
|---|---|
| Body | Low-copper aluminium alloy with cooling fins |
| Globe | Impact- and heat-resistant borosilicate glass sealed in an aluminium ring |
| Guard | Electropolished stainless steel cage |
| Gaskets | Silicone, resistant to acids and hydrocarbons |
| Mounting | 3 holes of 12 mm diameter |
| Entries | 2 ISO M25 entries; supplied with plug PLG2IB and gland NAV25IB |
| Lamp holder | Ceramic E27 or E40 |
| Ballast | Electromechanical |
| Wiring | Silicone rubber cable with glass-braid protection |
| Finish | Polyester paint RAL 7035 |
The values above come from the manufacturer documentation for the series. Where a figure is not listed for RLFE-80N2 in that documentation, it is left out here rather than estimated.
Typical applications for RLFE-80N2 in Oman and the GCC
The series is used for perimeter and area lighting at refineries, gas plants, offshore decks, tank farms and marine installations. In oil and gas, refineries, gas processing, pipelines, onshore and offshore platforms and loading terminals use these products wherever a flammable atmosphere may form. Power utilities and desalination and water plants use them in fuel handling, chemical dosing and treatment areas, while manufacturing and petrochemical sites use them in solvent, paint and process areas. The coastal climate of Oman and the Gulf makes the manufacturer corrosion and salt-mist data relevant when you compare materials.
Selection and compatibility notes for RLFE-80N2
The lamp is not part of the luminaire code. Order the discharge lamp (sodium vapour or metal halide, as indicated by the N or IM in the code) and any reflector or pole bracket separately, and confirm the voltage because other nominal voltages are available on request.
Before ordering RLFE-80N2, confirm the zone and gas group of the area, the required temperature class, the number and size of cable entries, the ambient temperature range and the finish. Entries and glands must carry their own ATEX or IECEx approval and a suitable ingress rating, and any change to the certified construction should be agreed with the manufacturer first.
Installation and commissioning of RLFE-80N2
Install RLFE-80N2 according to EN/IEC 60079-14 and the manufacturer instructions. Fix it on a flat support using the supplied fixing points, make the protective earth connection on the stainless steel earth screw, fit certified glands or stopping plugs in every entry, and close the cover completely before energising. The manufacturer notes that drilling of the body should be done by Cortem or by a workshop that holds the production notification under the ATEX Directive, so order the entries you need together with the enclosure.
Maintenance of RLFE-80N2
Switch off and wait before opening, clean the glass globe with a damp cloth, replace lamps with the specified type and wattage so the temperature class is respected, and check the gland and gaskets. Inspect the product on the schedule set by your site procedure for Ex equipment, and replace any gasket, glass or fastener that shows damage using parts that match the original specification.
Related products and ordering notes
The same Cortem catalogue includes cable glands, breather and drain valves, internal mounting frames, control and signalling operators, plugs and sockets and luminaires that are often supplied together with RLFE-80N2. When you send the RFQ, list the accessories and any drilling pattern you need so that the quotation covers the complete assembly. Lead time and availability are confirmed per request.
FAQ summary for RLFE-80N2
The questions below cover the points buyers ask most about RLFE-80N2: what it is, which ratings apply, whether a datasheet is available and how to request a quotation. Always check the current certificate before using the product in a classified area.
Hazardous-area purchasing in the Gulf usually involves a project specification, an inspection and test plan and a documentation package, so it helps to state early whether you need certificates, drawings or a certificate of conformity with the order. Buyers who maintain older plants also use this page to match a replacement against the code printed on an existing nameplate, and to check dimensions before cutting new openings in a panel or on a support frame. Quantities from a single spare to a full project lot can be quoted, and mixed orders that combine enclosures, glands, luminaires and accessories are handled in one quotation.
Documents and quotation
A manufacturer catalogue sheet for the series (in Italian) is attached to this page as the datasheet for RLFE-80N2. To receive a quotation, send us the RFQ with the part number RLFE-80N2 and the quantity you need, plus the zone, gas group and delivery destination in Oman or the GCC. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Datasheets & Documents
- Datasheet Cortem RLFE-80N2 Ex de Luminaire for Discharge Lamps Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.
Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.
Cortem company profile
| Founded | 24 February 1968, Villesse (Gorizia), Italy |
|---|---|
| Founders | Marco Rossi and Renato Gratton |
| Name | From the Italian for electromechanical construction and technical representation |
| Group companies | Cortem S.p.A., Elfit and Fondisonzo |
| Approvals | ATEX and IECEx certified explosion-protected equipment |
| Product families | Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices |
Milestones
- 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
- 2011: Research and development on LED lighting for hazardous areas begins.
- 2012: The first Cortem LED fixture series is launched.
- 2022: The third generation of Cortem LED fixtures is released.
Cortem product series
Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.
Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.
Where Cortem equipment is used
Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.
Cortem products we list
Ordering Cortem products: what we need
Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.
Facts checked against Cortem Group's published company history, October 2026.
Browse Cortem products by category: Automation Accessories.
FAQ
Questions about the Cortem RLFE-80N2 Ex de Luminaire for Discharge Lamps
Answers from our engineering team on installation, compatibility and integration.
01What is Cortem RLFE-80N2?
RLFE-80N2 is a Ex de discharge-lamp luminaire from the Cortem RLFE series, rated for Zone 1, 2, 21 and 22 hazardous areas with IP66 ingress protection or better.
02Which certificates apply to RLFE-80N2?
The catalogue lists ITS 12 ATEX 17645X and ITS 12.0048X for the series. Check the certificate for the exact version you order before installation.
03Is a datasheet available for RLFE-80N2?
Yes. The manufacturer catalogue sheet for the series is attached to this page. It is written in Italian and contains the dimensions, certification data and accessories.
04Does Seven Star LLC manufacture or represent Cortem?
No. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
05How do I request a quote for RLFE-80N2?
Send the RFQ with the part number RLFE-80N2, the quantity, the area classification and the delivery location. We reply with availability and lead time.


















Reviews
There are no reviews yet.