- Automation & ControlView all 2,720 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm LR3000 Guided Wave Radar Level Sensor, G 3/4, 100-1600 mm
Description
ifm LR3000 Guided Wave Radar Level Sensor, G 3/4, 100-1600 mm
The ifm LR3000 is a continuous level sensor using guided wave radar for water, oils and coolants in tanks. It is a modular system of evaluation unit and probe: the probe length is 100 to 1600 mm and can be shortened to fit the container. The process connection is a G 3/4 external thread, the resolution is 1 mm and the measuring error is plus or minus 7 mm.
The 4-digit LED display shows the level, and the outputs are switching, 4 to 20 mA (scalable, invertible) and IO-Link. The process temperature is -25 to 80 degrees Celsius, protection is IP67 and the supply is 18 to 30 V DC. Seven Star LLC supplies the ifm LR3000 in Oman and the GCC as an independent supplier in Muscat.
LR3000 technical specifications
The table lists the values published by the manufacturer for the LR3000. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / LR3000 |
| Resolution [mm] | 1 |
| Process connection | threaded connection G 3/4 external thread |
| Dimensions [mm] | Ø 50 / L = 99 |
| Probe length L [mm] | 100 to 1600 |
| Active range A [mm] | L-40 (when set to oil and oil based media: L-60) |
| Media | Liquids |
| Process temperature [°C] | -25 to 80 (90 < 1 h ; see note under remarks) |
| Operating voltage [V] | 18 to 30 DC |
| Current consumption [mA] | < 30 |
| Output signal | switching signal; analogue signal; IO-Link |
| Electrical design | PNP |
| Output function | normally open / normally closed (parameterisable) |
| Permanent current rating of switching output DC [mA] | 200 |
| Analogue current output [mA] | 4 to 20, invertible; (scalable) |
| Max. load [Ω] | 500 |
| Measuring error [mm] | ± 7 |
| Communication interface | IO-Link |
| Ambient temperature [°C] | -25 to 60 |
| Protection | IP 67 |
| Weight [g] | 378.4 |
| Materials | stainless steel (304/1.4301); stainless steel (316L/1.4404); FKM; PBT; PC; PEI; TPE-V |
| Materials (wetted parts) | stainless steel (303/1.4305); probe connection: stainless steel (316L/1.4435); PTFE; FKM; Sealing: NBR reinforced fibre |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
| MTTF [years] | 196 |
How the LR3000 works
The LR3000 is a guided wave radar level sensor. A short electromagnetic pulse travels down the probe rod, and when it meets the liquid surface a part of the pulse is reflected. The electronics time the echo and convert it to the distance to the surface, which becomes a level value on the 4 to 20 mA output, a switching output or IO-Link. Because the measurement is based on travel time, it does not depend on the density of the liquid, as long as the dielectric constant of the liquid stays above the stated limit.
Where the LR3000 fits and related parts
The LR3000 is the probe-length-adjustable GWR; the LR2750 in our range is a related guided wave type, while the LK3123 and LK1022 are capacitive continuous sensors.
Selection and ordering checklist for the LR3000
Work through the points below before you confirm the order, so that the LR3000 you receive is the one your machine or plant needs.
- Check tank height and probe length with the active range L-40 mm
- Check the medium: oil settings reduce the range to L-60 mm
- Confirm the G 3/4 thread
- Choose switching or analogue output
- Check process temperature -25 to 80 degrees Celsius
The manufacturer lists this article under the type designation Continuous level sensor (guided wave radar), LR0000B-BR34AMPKG/US. The article number LR3000 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Fit the probe through the process connection so that it hangs freely without touching the vessel wall or internal pipework, and keep it away from agitators and filling streams. Note the inactive zones at the top and bottom of the probe when you determine the usable range. During commissioning scale the analogue output to the empty and full positions and compare against a manual dip or sight glass. For hygienic processes follow the cleaning cycle for the connection used, and watch the process temperature at the connection, because the notes in the specification limit the temperature at the housing.
Typical applications in Oman and the GCC
Day tanks, lube oil and coolant tanks and sumps. In Oman and the GCC it is used on cooling and lubrication tanks outdoors.
Level sensors in tanks exposed to Gulf summers must tolerate hot product, condensation on cold nozzles and long periods without attention. Plan a periodic proof test of the alarm point, and record the output state at known levels during commissioning.
LR3000 compared with related ifm types
The table places the LR3000 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| LR3000 | GWR, G 3/4, 100-1600 mm probe, 4-20 mA, IO-Link | This page |
| LMT110 | Point level, G 1/2 cone, -40 to 100 C, 40 bar, IO-Link | Related type |
| LK3123 | Continuous capacitive, 472 mm, 4-20 mA, IO-Link | Related type |
| LMT100 | Point level sensor | Related type |
| LMC510 | Capacitive point level sensor | Related type |
| LK1022 | Continuous level sensor | Related type |
| LR2750 | Guided wave radar | Related type |
Information to send with an RFQ for the LR3000
To prepare an accurate offer for the LR3000, please include the following with your enquiry:
- Liquid, dielectric constant and process temperature
- Required probe length and tank height
- Process connection and hygienic requirements
- Analogue, switching or IO-Link output
- Quantity and delivery location
Documents and quotation
The official ifm data sheet for the LR3000 (document LR3000-06, English, issued 9 January 2024) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Datasheets & Documents
- Datasheet ifm LR3000 Data Sheet (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm LR3000 Guided Wave Radar Level Sensor, G 3/4,
Answers from our engineering team on installation, compatibility and integration.
01What probe lengths does the ifm LR3000 offer?
100 to 1600 mm, and the probe can be shortened.
02What is the measuring error of the LR3000?
Plus or minus 7 mm. This is the value published by the manufacturer for the LR3000; confirm details before ordering.
03What outputs does the LR3000 have?
Switching, 4 to 20 mA analogue and IO-Link. This is the value published by the manufacturer for the LR3000; confirm details before ordering.
04What process connection does the LR3000 have?
G 3/4 external thread. This is the value published by the manufacturer for the LR3000; confirm details before ordering.
05Which media can the LR3000 measure?
Liquids such as water, oils and coolants. This is the value published by the manufacturer for the LR3000; confirm details before ordering.


















Reviews
There are no reviews yet.