Brand:

Eaton DILAC-31(24VDC) Contactor Relay 3 N/O + 1 N/C

Description

Eaton DILAC-31(24VDC) contactor relay, 3 N/O + 1 N/C, 24 V DC coil

The Eaton DILAC-31(24VDC) (catalog number 276488) is a DILA contactor relay with 3 N/O + 1 N/C and a 24 V DC coil. Contactor relays are used in control circuits, where they multiply contacts, adapt voltage levels and isolate a PLC output from field circuits. The C in the model code marks spring-loaded terminals, which make wiring faster and keep the connection tight under vibration. It has a 24 V DC coil with three N/O and one N/C contact. They share the 45 mm wide housing of the DILM contactors, and mount on a DIN rail. Seven Star LLC supplies the DILAC-31(24VDC) in Oman and the GCC.

How to read the model code DILAC-31(24VDC)

DILAC is the contactor-relay series with spring-loaded terminals, the first digit gives the number of normally open contacts (3) and the second the number of normally closed contacts (1), and the bracket shows the coil: 24 V DC. All DILA relays are built with positive operating contacts, which means that N/O and N/C contacts of the same device cannot be closed at the same time.

DILAC-31(24VDC) technical specifications

Parameter Specification
Manufacturer / part number Eaton DILAC-31(24VDC) (catalog number 276488)
Series Eaton Moeller DILA contactor relay
Contacts 3 N/O + 1 N/C (positive operating contacts to EN 60947-5-1 Annex L)
Coil 24 V DC
Pick-up voltage 0.8 – 1.1 × Uc; 0.7 – 1.3 × Uc at 24 V without auxiliary contact module at +40 °C ambient
Coil power, pick-up / sealing 2.6 W / 2.6 W
Closing delay / opening delay (make contacts), max 31 ms / 12 ms
Mechanical lifespan 20,000,000 operations (DC operated)
Switching voltage range of the contacts 17 – 500 V AC; 24 – 220 V DC
Rated operational current AC-15, 220–415 V / 500 V 4 A / 1.5 A
Conventional thermal current Ith at 60 °C / rated switching current 16 A / 16 A
Short-circuit protection without welding (500 V) 10 A gG/gL, max.
Rated insulation voltage Ui / impulse withstand Uimp 690 V / 6000 V AC
Safe isolation 400 V AC between coil and contacts and between contacts (EN 61140)
Operating frequency 9000 operations per hour
Heat dissipation per pole / static 0.8 W / 3 W
Connection Spring-loaded terminals; solid 1 or 2 x 0.75–2.5 mm², flexible with ferrule 1 or 2 x 0.75–1.5 mm²
Dimensions (depth x height x width) 75 x 68 x 45 mm
Weight 0.286 kg
Degree of protection IP20, finger and back-of-hand proof
Ambient temperature, open / enclosed -25 to 60 °C / 40 °C max. enclosed

The data follows the manufacturer specification sheet for catalog number 276488, which also lists UL and CSA pilot-duty ratings (A600 for AC operation and P300 for DC operation) for the contacts.

How the DILAC-31(24VDC) works in a control circuit

When the coil is energised, the magnet closes the 3 make contacts and opens the 1 break contacts. When the coil is de-energised, a spring returns the contacts. The contacts are small-signal contacts with an AC-15 rating of 4 A at 220 to 415 V, so they are intended for coils of other contactors, solenoid valves, signal lamps and PLC inputs, not for motors. Because of the positive operating contacts, the relay can also be used in circuits where the state of the N/C contact has to be a reliable image of the N/O state. The sheet quotes a control-circuit reliability of 1 failure in 2,000,000 operations at 24 V DC and 5.4 mA minimum.

Selection checklist for the DILAC-31(24VDC)

  • Confirm the control voltage: 24 V DC.
  • Count the contacts needed: 3 N/O + 1 N/C, and plan an auxiliary contact module if more are needed.
  • Check that the load per contact stays within 4 A AC-15 at 220 to 415 V and the short-circuit protection of 10 A gG/gL.
  • Verify that the PLC output can drive the coil: about 2.6 W at 24 V DC, which is roughly 0.11 A.
  • Choose spring-loaded terminals according to the wiring practice in the panel.

Installation and maintenance of the DILAC-31(24VDC)

The relay clips onto a 35 mm DIN rail, is 75 mm deep, 68 mm high and 45 mm wide and weighs 0.286 kg. Insert conductors into the spring-loaded terminals with a 0.6 x 3.5 mm screwdriver; stripping length is 10 mm. Keep coil and contact wiring separated where possible, and do not mix voltage levels on neighbouring terminals without insulation. At inspection, check that terminals are tight and that no heat marks are visible; replace the relay if a contact sticks or the coil is noisy.

Applications of the DILAC-31(24VDC) in Oman and the GCC

Contactor relays are found in motor control centres, pump control panels, HVAC controls and packaged skids throughout Oman and the Gulf. In hot panels, mind the enclosed-ambient limit of 40 °C and the heat dissipation of 0.8 W per pole. The DILAC-31(24VDC) fits control circuits where a dependable, compact relay with DIN-rail mounting is needed, for example in water and desalination plants and in oil and gas utility panels.

Eaton DILA contactor relay variants

Model Contacts Coil
DILA-40(24V50/60HZ) 4 N/O 24 V AC 50/60 Hz
DILA-31(24V50/60HZ) 3 N/O + 1 N/C 24 V AC 50/60 Hz
DILA-40(24VDC) 4 N/O 24 V DC
DILA-31(24VDC) 3 N/O + 1 N/C 24 V DC
DILAC-31(24VDC) 3 N/O + 1 N/C, spring terminals 24 V DC
DILAC-22(24VDC) 2 N/O + 2 N/C, spring terminals 24 V DC

The variants above cover the usual contact and coil combinations. Always quote the complete model text of DILAC-31(24VDC), because coil voltage and terminal type are part of the code.

Information to send with an RFQ for DILAC-31(24VDC)

  • Exact model DILAC-31(24VDC) (catalog number 276488) and the quantity, including spares.
  • Coil voltage and the contact arrangement you need.
  • Load connected to the contacts, such as coils or signal lamps.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as an installation leaflet or declaration of conformity.

Documents and quotation

The manufacturer specification sheet for DILAC-31(24VDC) is attached on this page, so you can check the ratings, dimensions and approvals against your project before you order. Installation leaflets and declarations of conformity can be requested separately.

Seven Star LLC supplies Eaton industrial control products in Oman and the GCC. To request a quotation, send model DILAC-31(24VDC), the quantity and your delivery location, and we will confirm availability and lead time for your order.

Other Models in the Eaton Dila Relay Range

Seven Star LLC supplies models from the Eaton Dila Relay range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Eaton DILA-40(24V50/60HZ) Contactor Relay 4 N/OContactors & Overload RelaysView details
Eaton DILA-31(24V50/60HZ) Contactor Relay 3 N/O + 1 N/CContactors & Overload RelaysView details
Eaton DILA-40(24VDC) Contactor Relay 4 N/OContactors & Overload RelaysView details
Eaton DILA-31(24VDC) Contactor Relay 3 N/O + 1 N/CContactors & Overload RelaysView details
Eaton DILAC-31(24VDC) Contactor Relay 3 N/O + 1 N/CContactors & Overload RelaysYou are viewing this model
Eaton DILAC-22(24VDC) Contactor Relay 2 N/O + 2 N/CContactors & Overload RelaysView details
Datasheets & Documents
  • PDF Datasheet Eaton DILAC-31(24VDC) Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Eaton is a power management company that began in 1911, when Joseph O. Eaton started a truck axle business in New York and moved it to Cleveland, Ohio, in 1914. It grew from vehicle components into electrical equipment, hydraulics and aerospace systems. Since buying Cooper Industries in 2012, Eaton has been incorporated in Ireland with its head office in Dublin, and it is listed on the New York Stock Exchange.

Seven Star LLC lists Eaton NZM molded case circuit breakers, PKZM0 motor-protective circuit breakers and Bussmann series Class J fuses, and supplies them to panel builders and maintenance teams in Oman and the GCC.

Eaton company profile

Founded 1911, New York, USA, by Joseph O. Eaton
Early move Cleveland, Ohio, 1914
Headquarters Dublin, Ireland, since the 2012 Cooper Industries acquisition
Listing New York Stock Exchange (ETN)
Brands Eaton, Moeller, Bussmann, Crouse-Hinds, MTL and MEDC
Product families FAZ and PL miniature circuit breakers, NZM moulded-case breakers, DILM contactors, PowerXL variable frequency drives, 9PX and 93PM UPS, Bussmann fuses, hazardous-area enclosures and signalling

Milestones

  • 1911: Joseph O. Eaton starts an axle business in New York.
  • 1914: The business moves to Cleveland.
  • 2012: Eaton acquires Cooper Industries and redomiciles in Ireland.

Eaton circuit protection listed here

The NZMN1-A80 is a frame size 1 molded case circuit breaker rated 80 A with a thermomagnetic release for cable and system protection. The PKZM0-1,6 is a motor-protective circuit breaker whose overload release is adjustable from 1 to 1.6 A, used as a manual motor starter. The LPJ-35SP is a Bussmann series Low-Peak Class J time-delay fuse rated 35 A at 600 V AC. Older NZM and PKZ devices carry the Moeller name on the nameplate, and the type designations are the same.

Where Eaton breakers and fuses are used

Motor control centers, feeder panels, machine control cabinets and UL-style fused disconnects.

Eaton products we list

Family Examples
Circuit Breakers LPJ-35SP Class J Time-Delay Fuse, NZMN1-A80 Molded Case Circuit Breaker, NZMN2-A250 Molded Case Circuit Breaker, NZMN3-AE400 Molded Case Circuit Breaker, PKZM0-1
AC Drives DA1-342D2FB-A20C AC Drive, PowerXL DG1-34140FN-C21C Variable Freque…

Ordering Eaton parts: what we need

Send the full type and article number, the number of poles, the current rating or setting range, and any accessories such as auxiliary contacts, trip releases or rotary handles.

Facts checked against Eaton's corporate history and investor materials, October 2026.

FAQ

Questions about the Eaton DILAC-31(24VDC) Contactor Relay 3 N/O + 1 N/C

Answers from our engineering team on installation, compatibility and integration.

01What coil does the DILAC-31(24VDC) have?
24 V DC. The sheet lists a power consumption of 2.6 W both for pick-up and for sealing.
02How many contacts does the DILAC-31(24VDC) have?
It has 3 N/O + 1 N/C, all positively operated according to EN 60947-5-1 Annex L.
03What current can the contacts of the DILAC-31(24VDC) switch?
The sheet lists AC-15 ratings of 4 A at 220 to 415 V and 1.5 A at 500 V, with 10 A gG/gL as maximum short-circuit protection without welding.
04How fast does the DILAC-31(24VDC) switch?
The sheet lists a maximum closing delay of 31 ms and a maximum opening delay of 12 ms for DC operation.
05What are the dimensions of the DILAC-31(24VDC)?
75 mm deep, 68 mm high and 45 mm wide, with a weight of 0.286 kg.