- Automation & ControlView all 1,843 products
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Automation Accessories
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- HMI Displays
- Industrial Computers
- Servo Drives
- Motor Soft Starters
- Pneumatic Cylinders
- Machine Vision
- Automation Software
- Robotics
Brand: Kärcher
Kärcher NT 65/2 Tact² Wet and Dry Industrial Vacuum Cleaner
Description
A 65 litre wet and dry vacuum that cleans its own filter
The Kärcher NT 65/2 Tact² is a wet and dry vacuum cleaner from the Tact² class, which Kärcher describes as sought-after specialists and all-rounders because of mobility, power, robustness and practical equipment. The NT 65/2 Tact² comes with the full antistatic package as standard and suits jobs where large quantities of fine dust must be removed regularly.
It has a 65 litre plastic container, a single-phase 220 to 240 V motor of up to 2760 W and two turbines producing 2 x 74 l/s. The Tact² system divides the flat pleated filter into two halves cleaned alternately by targeted bursts of air, so the filter does not clog and a constant high air flow is maintained.
Technical specifications
| Parameter | Specification |
|---|---|
| Order number | 1.667-286.0 |
| EAN code | 4039784714953 |
| Number of current phases | 1 |
| Voltage | 220 – 240 V |
| Frequency | 50 – 60 Hz |
| Air flow | 2 x 74 l/s |
| Vacuum | 254 mbar / 25.4 kPa |
| Container capacity | 65 l |
| Container material | Plastic |
| Rated input power | max. 2760 W |
| Standard nominal width | ID 40 |
| Cable length | 10 m |
| Sound pressure level | 73 dB(A) |
| Colour | Anthracite |
| Protection class | I |
| Weight without accessories | 24.5 kg |
| Weight including packaging | 31.3 kg |
| Dimensions (L x W x H) | 575 x 490 x 880 mm |
Source: Kärcher product information sheet 1.667-286.0 dated 2026-10-09.
Filter cleaning, mobility and delivered equipment
Kärcher states that more than 1000 kg of category A fine dust can be vacuumed without changing the filter, because the filter is cleaned from the clean side while work continues. Automatic cut-out at maximum filling, a sturdy bumper and stop swivel castors are part of the equipment.
The delivery includes a 4 m electrically conductive suction hose, two 550 mm stainless steel tubes, a conductive bend, a 360 mm wet and dry floor nozzle, a crevice nozzle, an oil-resistant drain hose, a cellulose flat pleated filter and a push handle. The adjustable push handle and large wheels support transport over uneven surfaces, and the floor nozzle can be quickly fixed to the machine.
| Accessory (as printed) | Order no. |
|---|---|
| Dry flat pleated filter, cellulose, green label | 6.907-276.0 |
| Flat pleated filter, PTFE, dust class M | 6.907-449.0 |
| Wet and Dry flat pleated filter, PES with PTFE | 6.907-277.0 |
| Bend NT DN 40, stainless steel | 6.902-079.0 |
| Wet/dry floor nozzle Adv, DN 40, 360 mm | 2.889-153.0 |
| Wet/dry floor nozzle, aluminium, DN 40, 450 mm | 6.906-383.0 |
Standard Tact² or safety vacuum
The product sheet of the NT 65/2 Tact² lists no ATEX or dust-class H certification, so treat it as a general industrial wet and dry vacuum. If hazardous or combustible dust is present, a safety model such as the NT 75/1 Me Ec H Z22 is the correct class. The values of the group are below.
| Kärcher model | Container | Air flow | Vacuum | Power |
|---|---|---|---|---|
| IVS 100/55 M Z22 | 100 l stainless steel | 156 l/s (560 m3/h) | 240 mbar | 5.5 kW, 400 V three-phase |
| IVC 60/30 Tact2 | 60 l stainless steel | 68 l/s (244.8 m3/h) | 286 mbar | 3 kW, 400 V three-phase |
| IVR-L 100/24-2 Tc | 100 l steel | 148 l/s (532 m3/h) | 230 mbar | 2.4 kW, 220 – 240 V single-phase |
| NT 75/1 Me Ec H Z22 | 75 l stainless steel | 61 l/s | 220 mbar | max. 1000 W, 220 – 240 V |
| NT 65/2 Tact2 (this page) | 65 l plastic | 2 x 74 l/s | 254 mbar | max. 2760 W, 220 – 240 V |
Related Kärcher products: Kärcher IVC 60/30 Tact² Compact Industrial Vacuum Cleaner, Kärcher IVS 100/55 M Z22 ATEX Zone 22 Industrial Vacuum Cleaner, Kärcher IVR-L 100/24-2 Tc Liquid and Swarf Industrial Vacuum and Kärcher NT 75/1 Me Ec H Z22 ATEX Zone 22 Safety Vacuum Cleaner.
Documents and quotation
The Kärcher product information sheet is attached as the datasheet. Before ordering, confirm the dust type, whether liquids will be collected, the filter variant and the accessories needed, and that the single-phase supply can carry the 2760 W maximum power.
See the wider range of filtration and dust-collection systems on our catalogue, or send the model name and order number for a quotation.
Datasheets & Documents
- Datasheet Kärcher NT 65/2 Tact² product information sheet 1.667-286.0 (2026-10-09) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Kärcher is a German, family-owned manufacturer of cleaning equipment, founded in 1935 by Alfred Kärcher in Stuttgart-Bad Cannstatt and based in Winnenden since 1939. Its first products were hot-air blowers for warming aircraft engines; in 1950 the company built what it describes as Europe's first hot-water high-pressure cleaner. After Alfred Kärcher's death in 1959, his wife Irene Kärcher steered the business fully towards cleaning.
Kärcher company profile
| Founded | 1935, Stuttgart-Bad Cannstatt, Germany, by Alfred Kärcher |
|---|---|
| Headquarters | Winnenden, Baden-Württemberg, Germany, since 1939 |
| Ownership | Kärcher family; legal form SE & Co. KG |
| Size | Revenue of €3.44 billion and about 17,000 employees in 2024 |
| Product families | Hot and cold water high-pressure cleaners, scrubber driers, sweepers, wet and dry vacuums, steam cleaners, water treatment and dispensers, vehicle wash systems |
Milestones
- 1935: Alfred Kärcher founds his company in Stuttgart-Bad Cannstatt.
- 1939: The company moves into its new factory in Winnenden.
- 1950: The DS 350 hot-water high-pressure cleaner is introduced.
- 1959: Irene Kärcher takes over and focuses the company on cleaning.
Professional cleaning equipment
The professional range covers cold and hot water high-pressure cleaners, ultra-high pressure cage models, hot water generators, industrial and safety vacuum cleaners, dry ice blasting machines, scrubber driers and industrial sweepers. Each model is documented by a product information sheet with technical data, scope of supply and accessories.
Kärcher machines at Seven Star LLC
Seven Star LLC lists selected high-pressure cleaners, industrial vacuums, a dry ice blaster and an industrial sweeper for workshops, plants and maintenance teams in Oman and the Gulf. Each page quotes the manufacturer data as printed and links the official document, so supply, water temperature, flow and accessories can be checked before a request for quotation.
How to request a quotation
Send the model name and order number, the electrical supply or fuel, the surfaces to be cleaned and any accessories needed. Seven Star LLC prepares a quotation from the specification and confirms availability and lead time with the supplier.
Kärcher products we list
Facts checked against Kärcher's own company history (kaercher.com) and published company data, October 2026.
FAQ
Questions about the Kärcher NT 65/2 Tact² Wet and Dry Industrial Vacuum
Answers from our engineering team on installation, compatibility and integration.
01How does the Tact² system work on the Kärcher NT 65/2?
The flat pleated filter is split into two halves that are cleaned alternately by targeted air blasts, keeping air flow high.
02What are the suction values?
2 x 74 l/s air flow and 254 mbar vacuum from a motor of up to 2760 W.
03What container does it have?
A 65 litre plastic container with automatic cut-out at maximum filling level.
04Does it include an antistatic system?
Yes, Kärcher states that the full antistatic package comes as standard.
05How heavy is it?
24.5 kg without accessories and 31.3 kg including packaging.


















Reviews
There are no reviews yet.