Brand:

Belimo Energy Valve EV..R2+BAC DN 15-50 with Thermal Energy Meter

Description

Overview

The Belimo Energy Valve EV..R2+BAC is a two-way characterised control valve that measures what it controls. An actuator-driven ball valve, a measuring pipe with an ultrasonic flow sensor, two Pt1000 temperature sensors and a logic module are combined in one assembly, so the valve regulates water flow to a coil independently of system pressure while recording the thermal power and energy that the coil actually transfers. This threaded range covers DN 15 to DN 50 with nominal flows from 0.42 to 4.17 l/s, PN 25 rating, and Rp internal or G external thread connections.

Seven Star LLC supplies the Belimo Energy Valve on request to MEP contractors, consultants and facility managers across Oman and the GCC, with engineering support in Muscat. Where a conventional pressure independent control valve stops at limiting flow, the Belimo Energy Valve adds metering, data logging and web access, which is what owners need when they are trying to prove why a chilled water plant underperforms or why a district cooling bill is higher than expected.

Operating Principle

The flow sensor in the measuring pipe of the Belimo Energy Valve determines volumetric flow by ultrasonic measurement and passes the value to the controller. The setpoint is derived from the control signal: in flow control the maximum signal corresponds to the adjusted maximum flow, V’max, which can be set between 25 and 100 % of V’nom. The actuator compares setpoint and measured flow and corrects the ball position until they match, so the opening angle changes with differential pressure while the flow stays where it was asked to be. Belimo states a control accuracy of ±5 % across 25 to 100 % of V’nom with plain water, and a minimum controllable flow of 1 %.

Because supply and return temperatures are measured as well, the Belimo Energy Valve can also run in power control, where the control signal is assigned to the thermal output of the coil in kW instead of to a flow rate. Alternative modes are position control, which makes the unit behave like a conventional pressure-dependent valve, and differential pressure control using a Belimo 22WDP-11.. sensor with a setpoint of 10 to 400 kPa. The integrated Delta-T manager limits flow automatically whenever the temperature difference across the coil drops below a user-defined value, so a saturated coil is not fed with water that cannot add capacity.

Engineering Design of the Belimo Energy Valve

The valve body is brass with a stainless steel closing element and spindle, and the measuring pipe is nickel-plated brass. Close-off pressure is 1400 kPa and the maximum differential pressure is 350 kPa, with 200 kPa recommended for low-noise operation. Leakage is air-bubble tight to leakage rate A of EN 12266-1. The flow characteristic is equal percentage to VDI/VDE 2173 and can be switched to linear. Fluid temperature is -10 to 120 °C for water or water with up to 60 % glycol, and glycol monitoring reports the actual concentration.

The thermal energy meter of the Belimo Energy Valve is modular: the logic module carries the power supply, communication and NFC interface, while the sensor module holds the measurement electronics, so the sensor module can be replaced without removing the logic module. The meter has an RJ45 Ethernet port with an integrated web server, supports BACnet/IP, BACnet MS/TP, Modbus TCP, Modbus RTU, MP-Bus and the Belimo Cloud, and can be powered over Ethernet (IEEE 802.3af/at). Supply is AC/DC 24 V, with 4 to 5 W in operation depending on size. The logic module is rated IP54 and the sensor module IP65.

Key Features

The Belimo Energy Valve combines four functions that are usually purchased and commissioned separately:

  • Pressure-independent flow control with ultrasonic measurement, so each coil receives its design flow at every load.
  • Thermal energy metering with flow accuracy of ±2 % (20 to 100 % of V’nom at 20 °C) and EN 1434 Class 2 at 15 to 120 °C.
  • Four selectable control modes: power, flow, position and differential pressure control.
  • Delta-T manager that prevents low temperature difference across the coil by limiting flow.
  • Integrated data recording for 13 months, downloadable as CSV files through a web browser.
  • Glycol monitoring with ±4 % accuracy and automatic compensation of the flow reading.
  • Native BACnet, Modbus and MP-Bus communication, plus hybrid mode with an analogue 2 to 10 V signal.
  • Commissioning and diagnostics by NFC with the Belimo Assistant App or through the integrated web server.

Industrial Applications

In Gulf buildings the chilled water system carries most of the energy load, and low delta-T syndrome is one of its most common faults: chillers run at part capacity, extra pumps start, and district cooling providers in Muscat and elsewhere in the GCC may apply penalties when return water comes back too cold. Installing the Belimo Energy Valve on air handling units and large fan coil circuits in hotels, hospitals, malls, office towers and universities gives the operator coil-level power and temperature data, and the Delta-T manager keeps each coil from overflowing. The Belimo Energy Valve is also used on heat exchangers in data centres and laboratories, where documented energy per circuit supports tenant billing or efficiency reporting.

For retrofit projects in older buildings, the Belimo Energy Valve can replace a standard two-way valve with an existing BMS, using hybrid mode with an analogue signal while BACnet or Modbus delivers the measured values. Seven Star LLC supplies the Belimo Energy Valve with matching T-pieces, thermowells and pipe connectors, and helps convert a coil schedule into valve sizes and V’max settings for projects in Muscat, Sohar, Duqm and Salalah.

For circuits where metering is not required, mechanical alternatives include the Danfoss AB-QM PICV and Danfoss AB-PM combined balancing valve.

Technical Specifications

The following values for the Belimo Energy Valve EV..R2+BAC are taken from the Belimo technical data sheet (en-gb, 2024-04-24):

Parameter Specification
Model EV015R2+BAC, EV020R2+BAC, EV025R2+BAC, EV032R2+BAC, EV040R2+BAC, EV050R2+BAC
Nominal size DN 15 to DN 50, Rp internal and G external thread, PN 25
Nominal flow V’nom 0.42 l/s (1.5 m³/h) for DN 15 to 4.17 l/s (15 m³/h) for DN 50
Theoretical Kvs 3.2 to 30.4 m³/h
Control modes Power, flow, position, differential pressure (10 to 400 kPa)
Flow measurement Ultrasonic; ±2 % of 20 to 100 % V’nom; EN 1434 Class 2 at 15 to 120 °C
Temperature sensors Pt1000 EN 60751, T1 external with 3 m cable, T2 integrated
Close-off / max. differential pressure 1400 kPa / 350 kPa (200 kPa for low-noise operation)
Fluid and temperature Cold and warm water, glycol up to 60 % vol.; -10 to 120 °C
Communication BACnet/IP, BACnet MS/TP, Modbus TCP, Modbus RTU, MP-Bus, Belimo Cloud, web server
Power supply AC/DC 24 V or PoE DC 37 to 57 V
Materials Brass body, nickel-plated brass measuring pipe, stainless steel ball and spindle, EPDM O-ring
Ambient temperature / protection -30 to 50 °C; IP54 logic module, IP65 sensor module

How to Order

To request a quotation for the Belimo Energy Valve, send Seven Star LLC your coil or AHU schedule with design flow, supply and return temperatures, pipe size, available differential pressure and the BMS protocol in use. Our instrumentation team in Muscat will confirm the valve size and accessories, advise on stock and lead time for Oman and the GCC, and provide the Belimo technical data sheet for submittal. Related products on our site include the pFlow E5 ultrasonic energy meter, the Johnson Controls VFC-060HB butterfly valve and the Schneider Electric Altivar 212 HVAC drive for chilled water pumps.

Datasheets & Documents
  • PDF Datasheet Belimo Energy Valve EV..R2+BAC Technical Data Sheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Belimo is a Swiss manufacturer of actuators, valves and sensors for heating, ventilation and air conditioning, founded in 1975 as BELIMO Automation AG in Gossau, Zurich. Its name combines the German words for advise, deliver and install. Belimo began delivering actuators in 1976, moved its headquarters to Hinwil in 2002, and has been listed on the Swiss stock exchange as BEAN since 1995.

Seven Star LLC is an independent supplier in Muscat. We list Belimo valves, actuators and sensors for HVAC contractors and facilities in Oman and the GCC.

Belimo company profile

Founded 1975, Gossau, Switzerland
Headquarters Hinwil, Switzerland (since 2002)
Listing SIX Swiss Exchange (BEAN), since 1995
Name From beraten, liefern, montieren
Product families Damper actuators and spring-return actuators, PIQCV and EPIV pressure-independent valves, Energy Valve with thermal energy meter, characterised control valves, air and water sensors

Milestones

  • 1975: BELIMO Automation AG is founded.
  • 1976: Belimo delivers its first actuators.
  • 1995: Belimo lists on the Swiss stock exchange.
  • 2002: The headquarters moves to Hinwil.

Belimo product series

Valves include the Energy Valve EV..R2+BAC for DN 15-50 with thermal energy meter, the EPIV EP..F+MP flanged electronic pressure independent valve for DN 65-150 and the PIQCV C2..QPT piping package with PI zone valve for DN 15-20.

Damper actuators include the LF24-SR 4 Nm spring-return actuator and the NM24A-SR 10 Nm modulating actuator, both for 2-10 V control, and the 22ADP-154 is an air differential pressure sensor with Modbus for -100 to 2500 Pa.

Pressure independent control valves keep the flow constant despite pressure changes in the system, which helps balance chilled water networks. Energy Valves add flow and temperature sensors to measure delivered energy and can report through BACnet or Modbus.

Where Belimo products are used

Chilled water coils, fan coil units and air handling units, dampers in ducts, and pressure monitoring in buildings, hospitals and data centres.

Belimo products we list

Family Examples
Pressure Independent Control Valves Energy Valve EV..R2+BAC DN 15-50 with Th…, EPIV EP..F+MP Flanged Electronic Pressur…, PIQCV C2..QPT Piping Package with PI Zon…
HVAC & Combustion LF24-SR Spring-Return Damper Actuator 4 Nm, NM24A-SR Modulating Damper Actuator 10 Nm
Pressure Instrumentation 22ADP-154 Air Differential Pressure Sens…

Ordering Belimo products: what we need

Send the Belimo type code, or the flow, DN, torque, supply voltage, control signal and the BACnet or Modbus integration required.

Facts checked against Belimo's own 40-year history and company presentation, October 2026.

FAQ

Questions about the Belimo Energy Valve EV..R2+BAC DN 15-50 with

Answers from our engineering team on installation, compatibility and integration.

01What makes the Belimo Energy Valve different from a mechanical PICV?
A mechanical pressure independent valve limits flow with a spring-loaded regulator, while the Belimo Energy Valve measures flow ultrasonically and corrects the valve position electronically. It also measures supply and return temperatures, so it can control thermal power, limit flow when delta-T falls, and log power and energy for 13 months.
02Which communication protocols does the EV..R2+BAC support?
The thermal energy meter supports BACnet/IP, BACnet MS/TP, Modbus TCP, Modbus RTU and Belimo MP-Bus, and it can connect to the Belimo Cloud. It can also be controlled conventionally with a 2 to 10 V signal while the bus is used for feedback, which Belimo calls hybrid mode.
03What sizes and flows are available in the threaded range?
The EV..R2+BAC range runs from EV015R2+BAC (DN 15, 0.42 l/s) to EV050R2+BAC (DN 50, 4.17 l/s), all PN 25 with internal and external threads. Larger flows are covered by separate flanged versions of the valve.
04How does the Delta-T manager reduce chilled water energy use?
The user sets a minimum temperature difference for the coil. If the measured difference falls below this value, the valve limits flow, because extra water would not add capacity and would only lower chiller efficiency and raise pumping energy. The function works in power, flow and position control modes.
05Can Seven Star LLC supply the Belimo Energy Valve for projects in Oman?
Yes. Seven Star LLC supplies the Belimo Energy Valve and its accessories to contractors and facility owners in Oman and the GCC, with engineering support in Muscat. We can size valves from your coil schedule and provide the Belimo data sheet for approval.