- Automation & ControlView all 2,539 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- CCTV & Security
- Motor Soft Starters
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: KRACHT
KRACHT DBD Directly Controlled Poppet Valve
Description
Overview
KRACHT DBD is a directly controlled poppet-type pressure relief valve from KRACHT GmbH of Germany, engineered for high-pressure hydraulic protection duty up to 400 bar at flows up to 200 l/min. Where the SPV and HV valve families in KRACHT’s range use a sliding spool element, the DBD relies on a conical poppet seated against a hardened orifice — a construction that gives fast, positive shut-off and minimal internal leakage when closed, which matters most at the high pressures this valve is rated for. The DBD is offered in two mounting formats: as a self-contained valve in a pipeline housing with Whitworth pipe-thread connections, or as a bare cartridge that screws directly into a manifold or block bore, giving machine designers flexibility to integrate the relief function without a dedicated housing.
With fast quotation turnaround and technical support, Seven Star LLC proudly supplies the DBD poppet valve to industrial, marine, and process customers throughout the Sultanate of Oman and the wider GCC. Engineering and procurement teams in Muscat, Sohar, and Salalah rely on Seven Star LLC for genuine German-manufactured KRACHT hardware and for guidance on selecting the correct housing or cartridge configuration, orifice size, and set pressure for high-pressure hydraulic circuits.
Operating Principle
The KRACHT DBD operates on a direct-acting poppet principle: a precision-ground conical poppet is held against its seat by a calibrated compression spring acting through an adjustable spring cage. System pressure at the valve inlet acts on the exposed face of the poppet, and once that pressure exceeds the spring’s set force, the poppet lifts off its seat and fluid discharges through the resulting annular gap to tank or to a return line. Because the poppet-to-seat contact is a simple conical line seal rather than a sliding fit, the DBD achieves very low internal leakage in the closed position — an important characteristic at 400 bar, where even minor seat leakage represents meaningful wasted hydraulic power and heat generation.
As a directly controlled design, the DBD responds immediately to pressure at its own location without a separate pilot stage, giving fast reaction to sudden pressure spikes such as those from cylinder end-of-stroke shock or pump start-up transients. The trade-off inherent to any direct poppet valve is a steeper pressure-override curve at high flow compared with a pilot-operated design, but for the 200 l/min class the DBD is rated for, this is a well-established and predictable characteristic that hydraulic circuit designers size around routinely. The cartridge variant behaves identically to the housed version once installed, since the poppet, seat, and spring assembly are common to both configurations.
Engineering Design of the KRACHT DBD
The KRACHT DBD cartridge is a compact, fully self-contained steel assembly finished in KRACHT’s dark protective coating, with the poppet, seat, spring, and adjustment mechanism integrated into a single machined cartridge body. For pipeline installation, the cartridge is housed within a valve body carrying two Whitworth pipe-thread connections for straightforward pipe mounting. For cartridge-only installation, the same internal assembly is machined to a standard cavity profile so it can be screwed directly into the specified bore contour of a manifold, valve block, or pump housing — eliminating the separate housing entirely and reducing the number of external pipe joints in the circuit.
The poppet and seat are manufactured from hardened steel to withstand repeated high-pressure cycling without loss of sealing performance, and the spring cage allows the set pressure to be adjusted externally. This dual-format design is one of the DBD’s defining engineering strengths: the same qualified, pressure-rated internal cartridge can be specified either as a drop-in pipeline valve for retrofit projects or as an OEM cartridge for new manifold designs, without requalifying the sealing element itself.
Key Features
The KRACHT DBD directly controlled poppet valve is built for demanding high-pressure protection duty:
- The KRACHT DBD’s directly controlled conical poppet design gives fast response and very low internal leakage in the closed position.
- Maximum nominal pressure of 400 bar suits high-pressure hydraulic power units and heavy machinery circuits.
- Flow capacity up to 200 l/min covers typical high-pressure relief duty on pumps and actuator circuits.
- Dual mounting format available as a housed pipeline valve or as a bare cartridge for direct bore installation.
- Whitworth pipe-thread connections on the housed variant simplify pipeline retrofit installation.
- Hardened-steel poppet and seat construction is engineered for repeated high-pressure cycling without seat wear.
- Externally adjustable spring cage allows set-pressure tuning without disturbing the wetted poppet assembly.
- Compact cartridge envelope reduces manifold size and external pipe joints on new OEM machine designs using the KRACHT DBD.
Industrial Applications
The KRACHT DBD poppet valve is specified on high-pressure hydraulic power units for presses, injection molding machinery, and heavy mobile equipment across Oman’s industrial and manufacturing base. In Sohar’s industrial zones, where hydraulic circuits routinely operate at several hundred bar to drive large cylinders and rotary actuators, the DBD’s low-leakage poppet seal helps maintain circuit efficiency by minimizing losses across the relief valve during normal operation, while its cartridge format allows OEM machine builders to integrate the relief function directly into their manifold designs. Oil and gas service operations around Salalah’s port and logistics infrastructure also depend on directly controlled poppet valves like the DBD for high-pressure hydraulic tools and skid-mounted power units where fast response to pressure transients is critical.
With engineering support in Muscat, Seven Star LLC supplies the KRACHT DBD to industrial OEMs, hydraulic workshop operators, and heavy equipment maintenance teams across Muscat and the broader GCC, with manufacturer documentation and technical support. Engineers in the Sohar and Salalah economic zones specifying high-pressure relief protection can rely on Seven Star LLC’s team to confirm the correct housing or cartridge configuration and set-pressure range for their circuit.
Technical Specifications
Key technical parameters of the KRACHT DBD directly controlled poppet valve are summarized below; the KRACHT DBD is available in both housed and cartridge form.
| Parameter | Specification |
|---|---|
| Model | KRACHT DBD |
| Valve Type | Directly controlled poppet pressure relief valve |
| Flow Rate | Up to 200 l/min |
| Maximum Nominal Pressure | Up to 400 bar |
| Operating Temperature | -20°C to +80°C |
| Mounting Options | Pipeline housing (Whitworth pipe thread) or cartridge bore installation |
| Manufacturer | KRACHT GmbH, Germany |
Request a Quote for KRACHT DBD
Seven Star LLC invites facility engineers, procurement teams, and OEM machine builders across Oman and the GCC to submit a formal RFQ for the KRACHT DBD directly controlled poppet valve. Availability and lead time are confirmed at quotation, and the technical datasheet can be downloaded directly from this product page for engineering review. For guidance on KRACHT DBD housing versus cartridge configuration, orifice sizing, or set-pressure selection for your high-pressure circuit, contact Seven Star LLC’s instrumentation and hydraulics division directly. Seven Star LLC supplies the KRACHT SPV/SPVF on request with manufacturer documentation and dedicated local technical support on every order.
Also available: KRACHT HV/HVF Pilot Operated Slide Valve
See also: KRACHT Valve Technology Series; KRACHT SPV/SPVF Directly Controlled Slide Valve.
Datasheets & Documents
- Datasheet KRACHT DBD Directly Controlled Poppet Valve Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
KRACHT is the German maker of gear pumps, gear flow meters, hydraulic valves, motors and cylinders. The company was entered in the trade register in 1911 as Hillebrand & Kracht OHG and is based in Werdohl, in the Sauerland region of Germany. For most of its history it was a medium-sized family company; in January 2024 it became part of the Atlas Copco Group, in the Power and Flow division.
Seven Star LLC lists KRACHT pumps, flow meters, valves and hydraulic motors, and sources them by type key for machinery and marine users in Oman.
KRACHT company profile
| Founded | 1911, registered as Hillebrand & Kracht OHG |
|---|---|
| Headquarters | Werdohl, North Rhine-Westphalia, Germany; in today's premises since 1971 |
| Ownership | Atlas Copco Group since January 2024 (Power and Flow division, Power Technique business area); previously a family company |
| Size | About 440 employees and revenue of about EUR 72 million in 2022, as reported by Atlas Copco |
| Subsidiaries | USA, China and Hungary (KRACHT Hidraulik Kft.) |
| Product families | External gear pumps for lube oil, fuel and process duty, VC and VZ gear flow meters, pressure and flow control valves, hydraulic motors and cylinders |
Milestones
- 1911: Hillebrand & Kracht OHG is entered in the trade register.
- 1971: The company moves into its present premises in Werdohl.
- 1992: A gear manufacturer in Hungary is acquired, today KRACHT Hidraulik Kft.
- 2023–2024: Atlas Copco agrees to buy KRACHT in December 2023 and completes the deal in January 2024.
KRACHT pumps, flow meters and valves listed
The listing follows four product groups, pumps, fluid measurement, valves and drives:
- Pump technology: KF gear pumps for transfer of lubricating and other fluids, the KF-F version for fuels, and KP high pressure gear pumps
- Fluid measurement technology: gear type flow meters such as the VCA in aluminum
- Valve technology: SPV and SPVF pressure relief valves, the DBD directly controlled poppet valve, HV and HVF pilot operated valves and the DV B hydraulically pilot controlled valve
- Drive technology: KM hydraulic gear motors
Where KRACHT equipment is used
KRACHT equipment serves the marine, renewable energy, process technology and hydraulics industries. In practice that means lube oil and fuel oil transfer on engines, gearboxes and compressors, oil supply units, and metering of oils, resins, paints and other viscous media with gear flow meters in dosing and test bench systems. Enquiries from the GCC are mostly for a KRACHT pump or valve fitted to an imported machine or a ship's auxiliary system.
KRACHT products we list
Ordering KRACHT parts: what we need
KRACHT products carry a type key on the nameplate that encodes size, direction of rotation, shaft end, housing and seal material, connections and special numbers. An example from this page is SPV 10 L1G 1 A 12. Send the complete key and the serial or order number shown with it. If the plate is damaged, send the fluid and viscosity, flow rate, operating pressure and temperature, drive speed, port type and size, and photos with main dimensions. For KRACHT flow meters add the measuring range and the pickup or electronics required. We compare the key with KRACHT documentation and supply the manufacturer's data sheet on request.
Frequently requested KRACHT models: KRACHT Pump Technology Series.
Facts checked against KRACHT company literature and Atlas Copco's acquisition announcements, October 2026.
Browse KRACHT products by category: Safety Relief Valves, Pumps, Flowmeters, Electromotors.
FAQ
Questions about the KRACHT DBD Directly Controlled Poppet Valve
Answers from our engineering team on installation, compatibility and integration.
01What is the KRACHT DBD poppet valve used for?
The KRACHT DBD is a directly controlled poppet-type pressure relief valve used to protect high-pressure hydraulic circuits up to 400 bar, handling flows up to 200 l/min with fast response and low internal leakage.
02What is the difference between the housed and cartridge versions of the DBD?
The housed version is a complete valve in a pipeline body with Whitworth pipe-thread connections, while the cartridge version uses the same internal poppet assembly machined to screw directly into a manifold or block bore.
03Why does the DBD use a poppet rather than a slide/spool design?
The conical poppet-to-seat contact provides a very low-leakage seal in the closed position, which is important at the DBD's rated pressure of up to 400 bar where seat leakage would otherwise waste hydraulic power and generate heat.
04What operating temperature range does the DBD support?
The KRACHT DBD is rated for operating temperatures from -20°C to +80°C, suiting typical industrial hydraulic reservoir and ambient conditions.
05Is Seven Star LLC an experienced supply partner for KRACHT products?
Yes. Seven Star LLC is an experienced supplier of KRACHT GmbH in Oman and the GCC, supplying German-manufactured hardware with local technical support.


















Reviews
There are no reviews yet.