- Automation & ControlView all 2,481 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: KRACHT
KRACHT HV/HVF Pilot Operated Slide Valve
Description
Overview
KRACHT HV/HVF is a pilot-operated slide-type pressure relief valve from KRACHT GmbH of Germany, purpose-built to protect medium-pressure hydraulic circuits up to 160 bar while handling flow rates up to 350 l/min. Unlike a directly controlled valve where system pressure acts straight on the main spool, the HV/HVF uses a two-stage pilot arrangement in which a small pilot spool senses line pressure and controls the main slide element, giving markedly smoother regulation, lower pressure override at high flow, and quieter operation than equivalent direct-acting valve of the same capacity. This pilot-operated architecture also makes the HV/HVF particularly well suited to circuits running higher-viscosity hydraulic fluids, where a directly controlled spool can be sluggish to respond.
Backed by manufacturer datasheet documentation, Seven Star LLC proudly supplies the HV/HVF pilot-operated slide valve to industrial, marine, and process customers throughout the Sultanate of Oman and the wider GCC. Engineering teams in Muscat, Sohar, and Salalah turn to Seven Star LLC not only for genuine KRACHT hardware manufactured in Germany, but for the applications support needed to correctly size the pilot stage, connection type, and set pressure for medium-pressure hydraulic power units and machinery circuits.
Operating Principle
The KRACHT HV/HVF works on a two-stage pilot-operated principle. A small, lightly sprung pilot poppet continuously senses pressure at the valve inlet; when that pressure exceeds the pilot’s set point, the pilot stage opens and bleeds fluid from behind the main slide spool, unbalancing the forces holding it closed. The main spool then lifts and slides within its bore, opening a much larger flow path to tank than the pilot stage alone could provide. Because the main spool only has to overcome a small unbalanced pressure differential rather than the full line pressure directly, the HV/HVF achieves low pressure override — the difference between cracking pressure and full-flow pressure — even at its rated 350 l/min capacity, which keeps the protected circuit closer to its intended operating pressure throughout the relief event.
The HVF variant incorporates a refined spool pilot control geometry specifically tuned for higher-viscosity fluids, where cold hydraulic oil or heavier lubricants can otherwise slow pilot response. This spool-based pilot control senses pressure changes through the sliding element rather than a simple poppet, giving more consistent triggering across a wider viscosity range than a basic ball-and-seat pilot. In practice, this two-stage, pilot-driven behavior gives plant engineers a relief valve that opens smoothly, modulates proportionally with flow, and reseats cleanly without the audible chatter that can affect single-stage designs operating near their capacity limit.
Engineering Design of the KRACHT HV/HVF
The HV/HVF is built around a compact cast valve body in KRACHT’s blue housing finish, topped by a black pilot-adjustment cap that allows the set pressure to be tuned externally without disassembly. The valve is designed for direct pipeline installation and is available with SAE flanges or Whitworth (BSP) pipe threads, so it integrates into existing 160-bar-class hydraulic pipework without the need for adapter fittings. The main slide spool and pilot stage are both manufactured from wear-resistant steel to fine dimensional tolerances, ensuring long service life even under frequent relief cycling in medium-pressure circuits.
A machined port on the valve body accommodates the pilot sensing line, and the housing’s flow-direction markings are cast directly into the body for unambiguous installation. The nameplate carries model designation, serial number, and calibrated set-pressure data, consistent with KRACHT’s traceability practice across its valve technology range. The valve’s relatively compact footprint for its flow capacity makes it a practical retrofit option on existing hydraulic power units where panel or manifold space is constrained.
Key Features
The KRACHT HV/HVF pilot-operated slide valve is engineered for demanding medium-pressure hydraulic duty:
- The KRACHT HV’s two-stage pilot-operated slide design gives low pressure override and smoother regulation than direct-acting valves of comparable flow capacity.
- Flow capacity up to 350 l/min supports medium-pressure hydraulic power units and machinery circuits.
- Maximum nominal pressure of 160 bar covers the majority of industrial and mobile hydraulic protection duties.
- HVF spool pilot control variant maintains stable response even with higher-viscosity hydraulic fluids.
- Operating temperature range of -20°C to 80°C matches typical industrial hydraulic reservoir and ambient conditions.
- Externally adjustable pilot cap allows set-pressure tuning without disassembling the main valve body.
- Choice of SAE flange or Whitworth pipe thread connections simplifies integration into existing pipeline standards.
- Compact cast-body construction with wear-resistant internal components is engineered for long-duty industrial cycling, standard across every KRACHT HV unit supplied.
Industrial Applications
The KRACHT HV pilot-operated slide valve is a common specification on medium-pressure hydraulic power units driving industrial presses, mobile equipment hydraulics, and process machinery across Oman’s manufacturing and oil and gas sectors. Facilities in Sohar’s industrial zones running hydraulic clamping, lifting, and actuation circuits favor the HV/HVF where the two-stage pilot design keeps pressure override low even as flow demand varies during a duty cycle, protecting downstream actuators and seals from pressure spikes. Marine and offshore support operations based around Salalah’s port infrastructure also specify pilot-operated relief valves of this type on deck machinery and winch hydraulics, where fluid viscosity can vary significantly with ambient temperature.
Working closely with plant engineers in the region, Seven Star LLC distributes the KRACHT HV/HVF to industrial OEMs, hydraulic power unit builders, and marine service providers across Muscat and the broader GCC, with technical support for every order. Plant engineers in the Sohar and Salalah economic zones evaluating pilot-operated relief valves for medium-pressure circuits can rely on Seven Star LLC’s team to confirm pilot sensitivity, connection sizing, and HV versus HVF selection for their specific fluid and duty conditions.
Technical Specifications
Key technical parameters of the KRACHT HV pilot-operated slide valve are summarized below; the KRACHT HV/HVF designation covers both the standard and higher-viscosity spool-pilot variants.
| Parameter | Specification |
|---|---|
| Model | KRACHT HV / HVF |
| Valve Type | Pilot-operated slide (spool) pressure relief valve |
| Flow Rate | Up to 350 l/min |
| Maximum Nominal Pressure | Up to 160 bar |
| Operating Temperature | -20°C to +80°C |
| Connection Types | SAE flange or Whitworth (BSP) pipe thread |
| Special Feature | HVF spool pilot control for higher-viscosity fluids |
| Manufacturer | KRACHT GmbH, Germany |
Request a Quote for KRACHT HV/HVF
Seven Star LLC invites facility engineers, procurement teams, and hydraulic power unit builders across Oman and the GCC to submit a formal RFQ for the KRACHT HV/HVF pilot-operated slide valve. Lead time and freight options are confirmed at quotation, and the full technical datasheet can be downloaded directly from this product page for engineering review. For guidance on pilot sensitivity, connection sizing, or KRACHT HV versus HVF selection for higher-viscosity fluids, contact Seven Star LLC’s instrumentation and hydraulics division directly. With fast quotation turnaround and technical support, Seven Star LLC supplies the KRACHT HV/HVF on request with manufacturer documentation and dedicated local technical support on every order.
Also available: KRACHT DBD Directly Controlled Poppet Valve · KRACHT Valve Technology Series
Datasheets & Documents
- Datasheet KRACHT HV/HVF Pilot Operated Slide Valve Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
KRACHT is the German maker of gear pumps, gear flow meters, hydraulic valves, motors and cylinders. The company was entered in the trade register in 1911 as Hillebrand & Kracht OHG and is based in Werdohl, in the Sauerland region of Germany. For most of its history it was a medium-sized family company; in January 2024 it became part of the Atlas Copco Group, in the Power and Flow division.
Seven Star LLC lists KRACHT pumps, flow meters, valves and hydraulic motors, and sources them by type key for machinery and marine users in Oman.
KRACHT company profile
| Founded | 1911, registered as Hillebrand & Kracht OHG |
|---|---|
| Headquarters | Werdohl, North Rhine-Westphalia, Germany; in today's premises since 1971 |
| Ownership | Atlas Copco Group since January 2024 (Power and Flow division, Power Technique business area); previously a family company |
| Size | About 440 employees and revenue of about EUR 72 million in 2022, as reported by Atlas Copco |
| Subsidiaries | USA, China and Hungary (KRACHT Hidraulik Kft.) |
| Product families | External gear pumps for lube oil, fuel and process duty, VC and VZ gear flow meters, pressure and flow control valves, hydraulic motors and cylinders |
Milestones
- 1911: Hillebrand & Kracht OHG is entered in the trade register.
- 1971: The company moves into its present premises in Werdohl.
- 1992: A gear manufacturer in Hungary is acquired, today KRACHT Hidraulik Kft.
- 2023–2024: Atlas Copco agrees to buy KRACHT in December 2023 and completes the deal in January 2024.
KRACHT pumps, flow meters and valves listed
The listing follows four product groups, pumps, fluid measurement, valves and drives:
- Pump technology: KF gear pumps for transfer of lubricating and other fluids, the KF-F version for fuels, and KP high pressure gear pumps
- Fluid measurement technology: gear type flow meters such as the VCA in aluminum
- Valve technology: SPV and SPVF pressure relief valves, the DBD directly controlled poppet valve, HV and HVF pilot operated valves and the DV B hydraulically pilot controlled valve
- Drive technology: KM hydraulic gear motors
Where KRACHT equipment is used
KRACHT equipment serves the marine, renewable energy, process technology and hydraulics industries. In practice that means lube oil and fuel oil transfer on engines, gearboxes and compressors, oil supply units, and metering of oils, resins, paints and other viscous media with gear flow meters in dosing and test bench systems. Enquiries from the GCC are mostly for a KRACHT pump or valve fitted to an imported machine or a ship's auxiliary system.
KRACHT products we list
Ordering KRACHT parts: what we need
KRACHT products carry a type key on the nameplate that encodes size, direction of rotation, shaft end, housing and seal material, connections and special numbers. An example from this page is SPV 10 L1G 1 A 12. Send the complete key and the serial or order number shown with it. If the plate is damaged, send the fluid and viscosity, flow rate, operating pressure and temperature, drive speed, port type and size, and photos with main dimensions. For KRACHT flow meters add the measuring range and the pickup or electronics required. We compare the key with KRACHT documentation and supply the manufacturer's data sheet on request.
Frequently requested KRACHT models: KRACHT Pump Technology Series.
Facts checked against KRACHT company literature and Atlas Copco's acquisition announcements, October 2026.
Browse KRACHT products by category: Safety Relief Valves, Pumps, Flowmeters, Electromotors.
FAQ
Questions about the KRACHT HV/HVF Pilot Operated Slide Valve
Answers from our engineering team on installation, compatibility and integration.
01What is the KRACHT HV/HVF pilot-operated slide valve used for?
The KRACHT HV/HVF is a two-stage pilot-operated pressure relief valve used on medium-pressure hydraulic circuits, handling flows up to 350 l/min at pressures up to 160 bar with low pressure override.
02What is the advantage of pilot operation over a direct-acting valve?
Pilot operation lets the main spool respond to a small pressure differential rather than full line pressure, giving lower pressure override, smoother regulation, and quieter operation at higher flow rates than equivalent direct-acting valve.
03What makes the HVF variant suited to higher-viscosity fluids?
The HVF variant uses a spool-based pilot control geometry that maintains consistent triggering across a wider viscosity range than a basic ball-and-seat pilot, making it well suited to cold or heavier hydraulic fluids.
04What connection types are available for the HV/HVF?
The valve is available with SAE flanges or Whitworth (BSP) pipe threads, allowing direct installation into existing 160-bar-class hydraulic pipework.
05Is Seven Star LLC an experienced supply partner for KRACHT products?
Yes. Seven Star LLC is an experienced supplier of KRACHT GmbH in Oman and the GCC, supplying German-manufactured hardware with local technical support.


















Reviews
There are no reviews yet.