- Automation & ControlView all 2,465 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric XA2EW33M1 Green Illuminated Push-Button 220V
Description
XA2EW33M1: green flush illuminated push-button, 220 V AC, 1 NO
The XA2EW33M1 is a Schneider Electric Harmony XA2 complete illuminated push-button with a green flush head, a plastic bezel, a 22 mm mounting diameter, an LED lamp for 220 V AC and one normally open contact. Seven Star LLC supplies the XA2EW33M1 in Oman and the GCC as an independent supplier based in Muscat, and this page is written for maintenance buyers who need an exact like-for-like spare.
The datasheet carries a lifecycle notice that must be read before ordering: the reference is marked discontinued, with a discontinuation date of 9 Jan 2026 and end of service on 1 Jul 2026. Availability is therefore limited to remaining stock, and we advise confirming it early and asking about replacement options if the unit is for a new design.
Contact ratings and electrical life of the XA2EW33M1
The thermal current is 10 A and the insulation voltage is 600 V, with a 6 kV impulse withstand. Operational ratings are 3 A at 240 V in AC-15 and 0.27 A at 250 V in DC-13, and a 10 A gL fuse is specified for short-circuit protection. Electrical life is quoted at 500000 cycles for DC-13 at 0.2 A, 110 V and for 3 A at 230 V, at fewer than 60 operations a minute with a load factor of 0.5.
These are control-circuit ratings. XA2EW33M1 is suited to relay coils, contactor coils and PLC inputs, and any inductive load should be switched through an interposing relay or contactor in the usual way.
Where XA2EW33M1 is used in Oman and the GCC
Illuminated push-buttons of this series are typical on pump starters, conveyors, machine control desks and building service panels, where the button also shows the state of the function. As the XA2EW range is discontinued, most demand now comes from maintenance of installed panels, where a like-for-like unit avoids redrilling a door or changing the legend plate. In Oman and the GCC, such spares are required by workshops, utilities and plant maintenance teams.
Technical specifications of the XA2EW33M1
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / XA2EW33M1 |
| Range | Harmony XA2 |
| Product type | Complete illuminated push-button |
| Component name | XA2E |
| Bezel material | Plastic |
| Operator | Green flush, spring return |
| Contacts | 1 NO, slow-break |
| Light source / bulb base | LED / BA 9s |
| Rated supply voltage [Us] | 220 V AC 50/60 Hz (220–230 V) |
| Supply voltage limits | 176–242 V AC |
| Current consumption | < 20 mA |
| LED service life | 10000 h |
| Mounting diameter | 22.5 mm |
| Fixing centre | ≥ 30 × 40 mm; panel thickness 1–5 mm |
| Fixing nut torque | 2.2 N.m |
| Thermal current [Ith] | 10 A |
| Rated insulation voltage [Ui] | 600 V (IEC 60947-4-1) |
| Rated impulse withstand [Uimp] | 6 kV |
| Rated operational current [Ie] | 0.27 A at 250 V, DC-13, Q600; 3 A at 240 V, AC-15, A600 |
| Short-circuit protection | 10 A gL fuse |
| Mechanical durability | 1500000 cycles |
| Terminals | Screw clamp 2 × 1.5 mm² or 1 × 2.5 mm²; Faston 6.3 mm |
| Terminal tightening torque | 0.8 N.m |
| Dimensions (H x W x D) | 42 mm × 30 mm × 79.5 mm |
| Net weight | 0.064 kg |
| Degree of protection | IP65; IK03 |
| Operating / storage temperature | -25 to 55 °C / -40 to 70 °C |
| Vibration / shock | 10 gn, 40–500 Hz / 70 gn, 11 ms |
| Certifications | CCC, CE |
| Lifecycle | Discontinued on 9 Jan 2026; end of service on 1 Jul 2026 |
Illumination and contact function of XA2EW33M1
Unlike a separate button and lamp, this complete unit combines a spring-return head with a lamp behind the lens, so one 22 mm hole gives both a command and a status. The lamp is an LED, with a BA 9s bulb base listed in the datasheet, and the supply is 220 V AC at 50/60 Hz with permitted limits of 176 to 242 V and a current consumption below 20 mA. The service life is quoted as 10000 h. The contact is a single normally open element with slow-break operation, and the mechanical life is 1.5 million cycles.
Green is normally read as start, run or healthy. The green lens of XA2EW33M1 therefore suits a start or run function, where the lamp shows that the function is active while the contact issues the command. The lamp and the contact are separate circuits on the terminals, so confirm in the schematic how the lamp supply is connected before wiring.
Environment and approvals of the XA2EW33M1
Operating temperature is -25 to 55 °C, with storage from -40 to 70 °C. Vibration resistance is 10 gn from 40 to 500 Hz and shock resistance is 70 gn for 11 ms. The datasheet lists CCC and CE as the product certifications and IEC 60947-5-1 and GB 14048.5 among the standards. The upper operating limit of 55 °C is lower than on the XB4 series, so a panel with high internal temperature should be reviewed.
Mounting and terminal details of the XA2EW33M1
The unit fits a 22.5 mm hole with a fixing centre of at least 30 × 40 mm and a panel thickness of 1 to 5 mm. It is clamped by a nut with a recommended torque of 2.2 N.m, and the terminals are tightened to 0.8 N.m. The datasheet lists screw clamp terminals for 2 × 1.5 mm² or 1 × 2.5 mm², plus 6.3 mm Faston tabs. The body is 30 mm wide, 42 mm high and 79.5 mm deep, and the net weight is 0.064 kg.
Operating position is any position. The unit is stated for IP65 and IK03, so it is a lighter-duty operator than the metal XB4 series and should be mounted where it will not be struck.
Selection checklist and RFQ information for XA2EW33M1
Send the points below so that the part number can be confirmed against the datasheet and checked for availability in a single reply.
- Required quantity and the full part number XA2EW33M1.
- Panel thickness and the position of any anti-rotation key or nameplate.
- Confirmation of the lamp supply: 220 V AC, 50/60 Hz.
- The colour and function, here green for start or run.
- The age and tag of the installed unit, so that we can compare it with the datasheet.
- Whether a current-range replacement is acceptable if stock of this discontinued item has run out.
- Delivery location in Oman or the GCC and the time you need.
Documents and quotation
The Schneider Electric datasheet for the XA2EW33M1 is attached on this page for your technical file. It carries the electrical, mechanical and environmental data summarised above, together with dimension and wiring drawings.
To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.
Other Models in the Se Xa2ew Ipb Range
Seven Star LLC supplies models from the Se Xa2ew Ipb range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric XA2EW33M1 Green Illuminated Push-Button 220V | Automation Accessories | You are viewing this model |
| Schneider Electric XA2EW34M1 Red Illuminated Push-Button 220V | Automation Accessories | View details |
Datasheets & Documents
- Datasheet Schneider Electric XA2EW33M1 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric XA2EW33M1 Green Illuminated
Answers from our engineering team on installation, compatibility and integration.
01Is the XA2EW33M1 still in production?
No. The datasheet marks it as discontinued on 9 Jan 2026 with end of service on 1 Jul 2026, so availability depends on remaining stock.
02What supply does the lamp of the XA2EW33M1 use?
220 V AC at 50/60 Hz, with limits of 176 to 242 V and a current consumption below 20 mA.
03What contact does the XA2EW33M1 have?
One normally open contact with slow-break operation, rated 3 A at 240 V in AC-15.
04What protection rating does the XA2EW33M1 list?
IP65 and IK03, with operation from -25 to 55 degrees C.
05Does Seven Star LLC supply the XA2EW33M1 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability.


















Reviews
There are no reviews yet.