- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: MOOG
Moog G040-123C002 Valve Checker, 11+PE, 24 V
Description
Moog G040-123C002 valve checker overview
The Moog G040-123C002 is a variant of the G040-123 valve checker, a field instrument for checking the complete range of Moog electrical feedback flow control valves, both proportional and servo. This particular number, G040-123C002, is built for 11+PE connector, 24 V supply, single ended spool feedback. Mechanical feedback valves and pressure control (P and PQ) valves are not covered by the G040-123 family.
The G040-123C002 is connected in-line between the plant electronics and the valve, so the valve can be checked without being removed from the plant and hydraulic and electronic problems can be separated. It has two modes, Checker and Plant. In Checker mode the commands come from the checker and the spool signal is monitored on it, while the plant command is disconnected and the spool signal is passed back to the plant electronics.
In Plant mode the G040-123C002 acts as a monitor: the plant electronics command the valve, the spool signal returns to the plant, and the same signal is also available for monitoring on the checker. Power for the instrument comes from the plant supply line to the valve or from an external 24 V supply connected to a front-panel connector.
Key features of the Moog G040-123C002
- Tests hydraulics independently of the electronics.
- Caters for most Moog EFB valves, with models for specific connector and supply combinations.
- In-line operation, lightweight and portable.
- Built-in LED spool read-out and fixed cables and connectors.
- Test points to monitor command and spool signals, with a standardized plus or minus 10 V representation regardless of the actual signal type.
- CE marked.
G040-123C002 technical specifications
| Part number | G040-123C002 |
|---|---|
| Configuration | 11+PE connector, 24 V supply, single ended spool feedback |
| Type | In-line field checker for Moog electrical feedback (EFB) flow control valves |
| Command outputs | Plus or minus 10 V, plus or minus 10 mA, 4 to 20 mA and plant command |
| Maximum command output swing | Plus or minus 10 V, plus or minus 20 mA |
| Spool inputs | 2 to 10 V, plus or minus 10 V differential, plus or minus 10 V single ended, plus or minus 10 mA, 4 to 20 mA |
| Test points | Command and spool test points, 0 to plus or minus 10 V, 2.0 mm |
| Enable and valve OK threshold | On above 8.5 V, off below 6.5 V |
| Checker current load | 100 ohm |
| Supply options | External or plant 24 V supply, 18 to 36 V, 90 mA at 24 V |
| Cable length | 2.0 m |
| Dimensions | 205 mm W x 138 mm H x 70 mm D |
| Weight | 1.2 kg |
| EMC | EN 61000-6-2 and EN 61000-6-3; protective earth equal-potential to EN 60204-1 |
| Scope of supply | Valve checker body with cables, AC adapter and carry case |
The values for the G040-123C002 are taken from the maker’s datasheet, which was issued in February 2022. The ordering table lists the connector and supply versions as separate part numbers, so the number G040-123C002 determines which valve connector and supply the checker fits.
Typical applications in oil and gas, utilities, water and manufacturing
Plants that use Moog proportional and servo valves with onboard electronics, such as hydraulic skids on turbines and compressors, presses, injection moulding and rolling lines, and hydraulic gate drives, need a quick way to prove a valve. In Oman and the GCC the G040-123C002 serves service teams that must decide on site whether to replace a valve, a cable or a controller card.
Typical tasks are checking the spool response to a known command, monitoring the spool signal while the plant is running, measuring signals at the valve connector pins through the test points, and confirming that the enable input reaches the valve. Buyers often ask for the exact checker number such as G040-123C002 because the connector and supply version must match the valve.
Selection and compatibility notes for G040-123C002
Match the checker to the valve connector and the supply. The G040-123C002 is for 11+PE connector, 24 V supply, single ended spool feedback. The other listed versions are G040-123C001 (6+PE, 24 V), G040-123C002 (11+PE, 24 V), G040-123C003 (12 pin, plus or minus 15 V) and G040-123C004 (6+PE, plus or minus 15 V), and G040-123C008 for a 6+PE, 24 V direct drive valve not applicable to signal type code E.
Check the signal type. The checker supports command signals of plus or minus 10 V, plus or minus 10 mA and 4 to 20 mA and spool inputs as listed in the specification. If the valve has a 6 pin connector, the datasheet lists an adapter cable CD19586C050-001 for 6 pin to 6+PE as an option.
Installation and commissioning of the G040-123C002
Install the G040-123C002 between the plant cable and the valve connector, selecting Plant mode first so the system keeps control. Connect the front-panel 24 V supply if the plant line does not supply the checker. Make sure the protective earth connection is made as noted in the datasheet.
To test, switch to Checker mode, set the command with the potentiometer and use the sign switch to reverse flow. The command test point reads a standardized 0 to plus or minus 10 V. When a current spool signal is selected and the plant electronics supply no load, switch on the checker load of 100 ohm so that the signal can be read.
Maintenance and care
The G040-123C002 has no consumable parts besides the cables. Inspect the fixed cables and connectors for damage before every use and keep the housing dry. The enable on and off thresholds of 8.5 and 6.5 V can be used to verify the enable circuit.
Store the instrument in the carry case supplied with it. If readings look wrong, check the supply LEDs first: the checker LED lights when the internal 15 V is above 12 V, and the 24 V LED lights when 24 V is present from the plant or the front panel.
Related products and ordering notes for G040-123C002
Related items are the G040-119A battery checker for mechanical feedback valves, the IN123-825-001 buffer amplifier and the IN122-829A servo amplifiers, as well as the Moog valve families on this site.
Please state the quantity, the valve connector type, the supply voltage and the delivery location in the RFQ for the G040-123C002. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the Moog name and the part number are used only to identify the product being quoted.
Moog G040-123C002 vs Other Moog Valve Checker 24 V Variants
The Moog G040-123C002 is the choice when your application specifically needs G040-123C002 11+PE. Ordering a neighbouring size or rating in this family is the most common cause of returns, so compare the figure on the existing unit or the design data sheet before you send an RFQ.
| Variant | Distinguishing detail |
|---|---|
| Moog G040-123C001 Valve Checker, 6+PE, 24 V | G040-123C001 6+PE |
| Moog G040-123C002 Valve Checker, 11+PE, 24 V (this page) | G040-123C002 11+PE |
Frequently asked questions in short
The G040-123C002 is an in-line checker for Moog electrical feedback valves, version 11+PE connector, 24 V supply, single ended spool feedback. It works in Checker and Plant modes with test points for command and spool signals. See the questions for supply scope and the other versions.
Documents and quotation
The manufacturer’s datasheet for the G040-123 valve checker family is attached as a PDF so that the G040-123C002 data can be verified. To obtain a quotation, send an RFQ with the part number G040-123C002 and the quantity; Seven Star LLC will reply with availability and lead time for Oman and the GCC.
Other Models in the G040 123 Range
Seven Star LLC supplies models from the G040 123 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Moog G040-123C001 Valve Checker, 6+PE, 24 V | Electrical Testers & Multimeters | View details |
| Moog G040-123C002 Valve Checker, 11+PE, 24 V | Electrical Testers & Multimeters | You are viewing this model |
Datasheets & Documents
- Datasheet Moog G040-123C002 Valve Checker Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Moog is an American maker of precision motion control products, founded in July 1951 in East Aurora, New York, by Bill Moog, his brother Art Moog and Lou Geyer. Its first product was Bill Moog's electrohydraulic servo valve, which turns small electrical signals into fast, accurate hydraulic movement. Moog is still headquartered in East Aurora and is listed on the New York Stock Exchange.
Seven Star LLC lists Moog servo valves, proportional valves and an explosion-proof brushless servo motor, and sources them by model and type number for plants in Oman.
MOOG company profile
| Founded | July 1951, East Aurora, New York, as Moog Valve Company |
|---|---|
| Founders | Bill Moog, Art Moog and Lou Geyer |
| Headquarters | East Aurora, New York, USA |
| Ownership | Public company, New York Stock Exchange |
| Product families | Electrohydraulic servo and proportional valves, servo motors and drives, electromechanical actuators, test and simulation systems |
Milestones
- 1951: The Moog Valve Company starts in a corner of an airport hangar in East Aurora.
- 1953: The US patent for Bill Moog's electrohydraulic servo valve is issued.
- 1959: The company goes public as Moog Servocontrols Inc.
Moog servo valves and motors listed
The Moog products on this page are:
- G761 series: two-stage flow control servo valve with mechanical feedback
- 79 series, including D791 and D792: pilot-operated servo valves for high flow rates
- Servo valves and servo-proportional valves for hydraulic control in general
- G-3LM6-048-00-00-01: an explosion-proof brushless servo motor, listed here under the G400K series
Within one series, valves differ in rated flow, spool lap, coil rating, seal material and pilot arrangement. Two G761 valves with different type numbers are therefore not interchangeable without checking.
Where Moog servo valves are used
Moog servo valves control steam and gas turbine fuel and steam actuators, compressor anti-surge and guide vane actuators, steel mill gauge control, injection molding and presses, and materials test machines. In GCC power stations and gas plants the usual request is a like-for-like valve for a turbine control actuator specified by the turbine builder.
MOOG products we list
Ordering Moog parts: what we need
The nameplate on a Moog servo valve shows the model, a type designation and a serial number. Please send all three, or a clear photo. The type designation fixes rated flow, maximum operating pressure, signal and coil data, seals and connector, and is the only safe basis for quoting. If the valve was supplied through a machine builder, also give the builder's own part number. State the hydraulic fluid, especially if it is a fire-resistant phosphate ester, since that decides the seal material. For Moog servo motors, send the full model string, as in the G400K example above, and the drive it runs with.
Frequently requested MOOG models: Moog Servo Valves and Proportional Valves.
Facts checked against published Moog company histories, October 2026.
Browse MOOG products by category: Control Valves, Electromotors.
FAQ
Questions about the Moog G040-123C002 Valve Checker, 11+PE, 24 V
Answers from our engineering team on installation, compatibility and integration.
01Which valves can the G040-123C002 check?
The G040-123 family checks the complete range of Moog electrical feedback flow control valves, both proportional and servo. Mechanical feedback and P or PQ pressure control valves are not covered.
02What configuration is the G040-123C002?
According to the ordering table the G040-123C002 is the 11+PE connector, 24 V supply, single ended spool feedback version.
03What is supplied with the G040-123C002?
The supply scope listed by the maker includes the valve checker body with cables, an AC adapter and a carry case.
04What are the Checker and Plant modes of the G040-123C002?
In Checker mode the valve command comes from the checker; in Plant mode the plant electronics command the valve and the checker only monitors the spool signal.
05How do I request a quotation for the G040-123C002?
Send an RFQ with G040-123C002, the quantity and the delivery location. Seven Star LLC replies with availability and lead time.


















Reviews
There are no reviews yet.