- Automation & ControlView all 2,716 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand
Megger
Megger is the British maker of electrical test instruments whose name became the everyday word for an insulation tester. Its roots go back to 1889, when Sydney Evershed built an early insulation testing set, and the Megger trademark was registered in 1903. The group is headquartered in Dover, UK. Seven Star LLC is an independent supplier in Muscat. We list Megger insulation testers, low resistance ohmmeters, earth testers, cable fault locators and relay test sets for testing and maintenance teams in Oman and the GCC.
Read the full brand profile ↓- 5 products
- 1 category

5 products
Brand profile
About Megger
- Founded
- 1889
- Headquarters
- Dover, United Kingdom
- Speciality
- Electrical test and measurement instruments
- Listed with us
- 5 products
Megger products by category
Megger is the British maker of electrical test instruments whose name became the everyday word for an insulation tester. Its roots go back to 1889, when Sydney Evershed built an early insulation testing set, and the Megger trademark was registered in 1903. The group is headquartered in Dover, UK.
Seven Star LLC is an independent supplier in Muscat. We list Megger insulation testers, low resistance ohmmeters, earth testers, cable fault locators and relay test sets for testing and maintenance teams in Oman and the GCC.
Megger company profile
| Origins | 1889 insulation testing set by Sydney Evershed. Evershed & Vignoles was formed in 1895, and the Megger trademark was registered in 1903. |
|---|---|
| Headquarters | Dover, UK, with major US sites in Dallas (Texas) and Valley Forge (Pennsylvania) |
| History | Evershed & Vignoles joined AVO in 1968, and the group took the Megger name in 2002 |
| Product families | Insulation resistance testers, low resistance ohmmeters, earth testers, cable fault location, relay and circuit breaker test sets, transformer and battery testers, multimeters and installation testers |
| Users | Utilities, substation and switchgear contractors, oil and gas maintenance teams, motor and cable testing, building services electricians |
Milestones
- 1889: Sydney Evershed's insulation testing set.
- 1895: Evershed & Vignoles is formed.
- 1903: The Megger trademark is registered.
- 1968: Evershed & Vignoles joins AVO.
- 2002: The group takes the Megger name.
Megger instruments we list
| Model | Type | Typical job |
|---|---|---|
| MIT1025/2 | 10 kV insulation resistance tester | Insulation, polarisation index (PI) and dielectric absorption tests on MV cables, motors, generators and transformers |
| DLRO10X | 10 A digital low resistance ohmmeter | Micro-ohm tests on busbar joints, breaker contacts, cable splices and bonds |
| DET4T2 | Four-terminal earth tester | Earth electrode resistance and soil resistivity for substations and earthing systems |
| TDR2000/3 | Dual-channel time domain reflectometer | Locating faults, splices and opens on power and communication cables |
| SMRT410 | Multi-phase relay test system | Secondary injection testing of protection relays during commissioning and maintenance |
An insulation test applies a DC voltage and measures the leakage current to give a resistance value. Tracking that value and the PI over time shows moisture and ageing in a winding or cable long before it fails. The test voltage is chosen from the equipment’s rated voltage, so a 10 kV tester can test MV equipment properly where a 1 kV or 5 kV model cannot.
Where Megger instruments are used
In Oman and the GCC, Megger testers are standard equipment for substation commissioning, switchgear and cable acceptance tests, motor and generator maintenance in oil and gas, power and water plants, and periodic earthing system checks.
Ordering Megger instruments: what we need
Send the model and any kit or accessory codes (leads, carry case, software, calibration certificate), and say whether a UKAS or ISO 17025 calibration certificate is required. For relay test sets, list the number of current and voltage channels you need and the test software.
Facts checked against Megger company history pages, October 2026.
Request a Quote for Megger Products
Looking for Megger parts not listed here, or pricing for a project? Send us the part numbers and quantities. Seven Star LLC sources genuine Megger products for customers across Oman and the GCC and replies with a formal quotation.
- Genuine OEM products
- Supply across Oman & the GCC
- Formal quotation from our sales team
Free, no-obligation quotation · takes about 1 minute
Other enquiries: [email protected] · WhatsApp
FAQ
Questions about Megger
Common questions about Megger equipment, part numbers and supply to Oman and the GCC.
01Which Megger instrument fits which test?
An insulation tester such as the MIT1025/2 applies a high DC voltage and reads megohms or gigohms, which shows the condition of insulation. A low resistance ohmmeter such as the DLRO10X passes a test current through a joint or contact and reads micro-ohms. A time domain reflectometer such as the TDR2000/3 sends pulses down a cable to find the distance to a fault.
02What test voltage should a Megger insulation tester have for my equipment?
That comes from your test standard or the equipment maker's procedure, not from the instrument. Medium-voltage cables, large motors and generators are commonly tested at 5 or 10 kV, which is the class of the MIT1025/2. Tell us the rated voltage of the asset and the standard you follow, and we will propose the matching Megger model.
03What does the suffix in a Megger model name mean?
Suffixes such as /2 or /3 separate versions of an instrument, and letters can mark feature levels. Accessories and firmware are not always shared between versions. Quote the name exactly as printed on the instrument or in your specification, and if a listed model has been superseded we will propose the successor the manufacturer names.
04What should I send to get a quotation for a Megger tester?
Send the full model name, the quantity and the accessories required: lead sets and their length, clamps, carrying case, software. Mention any document your quality system needs with the instrument. For replacements of an older unit, add its model and serial number so we can check the current equivalent in the Megger catalog.
05Is Seven Star LLC a distributor of Megger?
No. Seven Star LLC is an independent industrial supplier based in Muscat, not a distributor or agent of Megger. We source Megger test instruments and accessories through commercial channels, check the model or order code against the manufacturer's documentation, and provide the manufacturer's datasheet and the certificates the manufacturer issues with the order on request.
















